Imou Bullet 2S Full Color Night Vision User Manual
- June 5, 2024
- imou
Table of Contents
Imou Bullet 2S Full Color Night Vision
Welcome
Thank you for choosing IMOU.
We are devoted to providing you easy smart home products. If you have problems
using the product, please contact our service team before returning your
product.
Our service mail:
service.global@imoulife.com
Frequently asked questions can be found at imoulife.com/support/help
Package content
Camera introduction
The pattern of the LED indicator is included in the following table.
| LED Status | Device Status |
|---|
Off
| Powered off/LED turned off Rebooting after reset
Red light on| Booting
Device malfunction
Green light flashing| Waiting for network
Green light on| Operating properly
Red light flashing| Network connection failed
Green and red light
flashing alternately
| Firmware updating
Tips
To ensure the best possible wireless performance, please make sure there are
no obstacles and electromagnetic interference between the camera and router.
Troubleshooting
| Problem | Solution |
|---|
The APP says “Failed to configure device network”
| ****
• Reset your Camera and connect it again.
• Some cameras only support 2.4GHz, while some routers have dual band, 2.4G/5G. Make sure you are connecting 2.4GHz only.
No audio
| ****
• Ensure audio function on camera is turned on.
• Ensure audio is turned up on viewing device.
Human detection not working
| ****
• Ensure you have enabled “Human Detection” in the Device Settings screen of the Imou LifeApp.
The device cannot work normally or start?
| • Check the LED indicator status. If the light is not in green, press and hold the reset button for 10 s to reset the the carmera.
How to connect the camera to a new Wi-Fi?
| • If the camera is offline, reset the camera, and the configure the camera again.
Connection is overtime?
| • Check if the distance between the camera and the router, the camera and
the smart phone is within 5 m (16.4 ft) during the connection.
When the Micro SD card is full, how is the recorded
video saved?
| • When the Micro SD card is full, the system will overwrite the previous recorded videos. Save the important information in time.
The device is offline?
| Check the indicator status:
• If the green light is on, check whether the router can connect to the Internet. If Internet is working, restartthe camera.
• If the red light flashes, reset the camera, and then configure the camera again.
• If the red light is on, it means the camera is faulty.
@imouglobal
E service.global@imoulife.com
W www.imoulife.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>