NOVUS NV-IR60 LED Illuminator User Manual

: June 5, 2024
: Novus

Table of Contents

INFORMATION
PACKAGE CONTENTS
MAIN CHARACTERISTICS
SPECIFICATION
INSTALLATION
SETTINGS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

user’s manual

NV-IR60/150LED

INFORMATION

THE PRODUCT MEETS THE REQUIREMENTS CONTAINED IN THE FOLLOWING DIRECTIVES:

DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 26 February 2014 on the harmonization of the laws of the Member States relating to electromagnetic compatibility (OJ L 96, 29.3.2014, p. 79–106, with changes)
DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012 on waste electrical and electronic equipment (WEEE) (OJ L 197, 24.7.2012, p. 38–71, with changes)
DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (OJ L 174, 1.7.2011, p. 88–110, with changes)

Information

The device, as a part of a professional CCTV system used for surveillance and control, is not designed for self-installation in households by individuals without technical knowledge.
The manufacturer is not responsible for defects and damages that result from improper or inconsistent user manual installation of the device in the system.

WARNING!
THE KNOWLEDGE OF THIS MANUAL IS AN INDISPENSABLE CONDITION FOR A PROPER DEVICE OPERATION. YOU ARE KINDLY REQUESTED TO FAMILIARIZE YOURSELF WITH THE MANUAL PRIOR TO INSTALLATION AND FURTHER DEVICE OPERATION.
WARNING!
THE USER IS NOT ALLOWED TO DISASSEMBLE THE CASING AS THERE ARE NO USER- SERVICEABLE PARTS INSIDE THIS UNIT. ONLY AUTHORIZED SERVICE PERSONNEL MAY OPEN THE UNIT
INSTALLATION AND SERVICING SHOULD ONLY BE DONE BY QUALIFIED SERVICE PERSONNEL LD CONFORMS TO ALL LOCAL REGULATIONS
WARNING!
PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT DESCRIBED FOR THE GIVEN PRODUCT IN THE USER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE PRODUCT, OR IF IT DOES NOT ARISE FROM THE USUAL APPLICATION OF THE PRODUCT, THE MANUFACTURER MUST BE CONTACTED UNDER THE RIGOR OF EXCLUDING THE MANUFACTURER’S RESPONSIBILITY FOR THE RESULTS OF SUCH AN ACTION.

Prior to undertaking any action please consult the following manual and read all the safety and operating instructions before starting the device.
Please keep this manual for the lifespan of the device in case referring to the contents of this manual is necessary;
All the safety precautions referred to in this manual should be strictly followed, as they have a direct influence on the user’s safety and durability, and reliability of the device;
All actions conducted by the servicemen and users must be accomplished in accordance with the user’s manual;
The device should be disconnected from power sources during maintenance procedures;
Usage of additional devices and components neither provided nor recommended by the producer is forbidden;
Mounting the device in places where proper ventilation cannot be provided (e. g. closed lockers etc.) is not recommended since it may lead to heat build-up and damage the device itself as a consequence;
Mounting the illuminator on an unstable surface or using not recommended mounts is forbidden. Improperly mounted illuminators may cause a fatal accident or maybe seriously damage themselves. The illuminator must be mounted by qualified personnel with proper authorization, in accordance with this user’s manual;
SAFETY REQUIREMENTS
The device should be supplied only from power sources whose parameters are in accordance with those specified by the producer in the illuminator technical datasheet. Therefore, it is forbidden to supply the illuminator from a power source with unknown parameters, unstable or not meeting the producer’s requirements;
Signal cables should be placed in a way that excludes the possibility of damaging them by accident. Special attention must be paid to cables getting from the illuminator and connecting the power supply;
Electric installation supplying the device should be designed to meet the specifications given by the producer in such a way that overloading is impossible;
The user cannot repair or upgrade the equipment himself. All maintenance actions and repairs should be conducted only by qualified service personnel;
Unplug the illuminator from the power source immediately and contact the proper maintenance department when the following occurs:
• Damages to the power cord or to the plug itself;
• Liquids getting inside the device or exposure to strong mechanical shock;
• The device behaves in a way not described in the manual and all adjustments approved by the manufacturer and possible to apply by the user himself, seem not to have any effect;
• The illuminator is damaged;
• Atypical behavior of the illuminator components may be seen (heard).
In the necessity of repairs, attention to using only original replacement parts (with their parameters in accordance with those specified by the producer) should be paid. Non-licensed service and non-genuine replacement parts may cause fire or electrocution;

Attention!
Technical changes are reserved without prior notice and printing errors are possible.

PACKAGE CONTENTS

The package contains:

IR Illuminator
User’s Manual
6*40 Self-tapping Screw (3 pcs)
Plastic-Conical-Anchor (3 pcs)
Fixing Bracket
Hexagonal wrench
Spring Pad (2 pcs)
6*8 Hexagonal Screw (2 pcs)
Power cable
Mounting drawing paper

If any of the listed equipment has been damaged during transport or if the package is incomplete, the contents of the package should be packed back into the original box. Please contact your local NOVUS distributor for further assistance.

MAIN CHARACTERISTICS

Key futures of IR illuminator NV-IR60/150LED:

High-efficiency cooling structure
Weatherproof enclosure
Adjustable IR LED intensity
Adjustable visible light sensor sensitivity
High Power LED
IR range: up to 150m outdoor
IR angle: 60°
Extended IR LED life
Power supply: 12VDC/24VAC

SPECIFICATION

IR LED

3.1 Dimensions

NOVUS NV IR60 LED Illuminator - Dimensions 3.2 Layout of important items

INSTALLATION

Please familiarize yourself with the device, its parameters, and methods of mounting, before mounting

Put mounting drawing paper to the wall or ceiling and mark drill holes.
Drill holes using markings.
Using mounting screws from the package, attach the fixing bracket to the ceiling/wall.
Gently screw the illuminator to the fixing bracket, using 2 screws and 2 small pads from the package.
Manually point the illuminator in the desired direction.

Screw the illuminator firmly (holding it with your hand if needed).
NOVUS NV IR60 LED Illuminator - fig

4.1 Power supply connection
Warning: The device should be supplied only from power sources whose parameters are in accordance with those specified by the producer in the camera technical datasheet. Therefore, it is forbidden to supply the illuminator from power sources with their parameters unknown, unstable, or not meeting the producer’s requirements.
4.1.1. 12VDC power supply NOVUS NV IR60 LED Illuminator - power
supply 4.1.2. 24 VAC power supply

NOVUS NV IR60 LED Illuminator - power supply1

SETTINGS

5.1. Adjusting the intensity of IR LED
If want to change the intensity of the IR light, open the cover at the back of the illuminator (Current socket) and adjust the value of this parameter by using a screwdriver.
5.2. Adjusting the sensitivity of the visible light sensor
If want to change the sensitivity of the visible light sensor, open the cover at the back of the illuminator (Lux socket) and adjust the value of this parameter by using a screwdriver. Increasing this parameter will cause the IR LED will start working in a darker situation. Decreasing this parameter will cause the IR LED will start working under a brighter situation.

All rights reserved ©
AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
431 Pulawska St., 02-801 Warsaw, Poland
tel.: +4822 546 0 546, kontakt@aat.pl
www.novuscctv.com