GAZE GZ-UVSTER1 Wireless Charging UV Sterilizer User Manual
- June 5, 2024
- GAZE
Table of Contents
GAZE GZ-UVSTER1 Wireless Charging UV Sterilizer
PRODUCT FEATURES
Wireless charging
- Please plug the provided USB-C cable into product USB port and connect to the power supply, the product defaults to the wireless charging mode and the standby indicator is red
- Wireless charging indicator light: relight on standby and green light on charging
- FOD foreign object detection: When a metal foreign object is detected, the red and green light flashes six times a nd the power supply is stopped
Disinfection
- Put the mobile phone or other articles to be sterilized into the box and close the top cover, and press the button get into the disinfection mode.
- 5 minutes disinfection mode: press the round button once, the built-in buzzer will beeps one time and the bite breathing light on, the inside UVC/UVA Light on sails for disinfection When The buzzer continuously beeps three times means the disinfection is completed
- 10 minutes disinfection mode: after the 5 minutes disinfection mode is turned on, press the button aga in automatically switch to the 10 minutes disinfection mode The round breathing light changes from blue to purple and the built-in buzzer be eps once again. The inside UVC/UVA light on starts for disinfection. When the buzzer continuously beeps three times means the disinfection is completed.
- If you want to stop it during the disinfection mode please press the round button again the round indicator light urns to blue, the box can be open to safely re move inside articles
- When open the top cover of box, the UV disinfection Ight will automatically turn off after 3 seconds.
PRODUCT PART DESCRIPTION
PRODUCT SPECIFICATION
- Product name: 15W fast wireless charger UV disinfection box
- Product Model: WS-10 Product standard: Qi
- Input DC1241.5A, 9V/ 1.67A, 5V/2A
- Wireless charging output 15W110WI7.5W5W
- UV Sterilizer output 3w (Max)
- UVG- LED disınfection light: 4 pieces
- Product size: 220″120 44mm
- Product weight: 360g
- Color: Black, Green, Blue Pink
- Material: ABS + PC
- Wireless charging conversion rate: s 80%
- Charging distance: s10mm
Smart Switch
If open the top cover during the disinfection mode, the disinfection will stop automatically after 3 seconds to avoid of any unnecessary harm to the human body. Please close the sterilizer box and press the round button again too restart the disinfect on.
Quick Guide
- Plug the provided USB-C cable into product USB port and connect to the power supply, the product defaults to the wireless charging mode.
- Put the articles that need to be sterilized into the box and close the top cover, select the disinfection mod e as follows
- Click the round button, the inside buzzer beep: s once ad start 5 minutes disinfection mode.
- Click the round button again the buzzer will be ep once a9gain and start 10 minutes disinfection mode.
- Just click the button once to stop the disinfection
- Wireless charging function place the mobile phone in the middle of the upper cover and it can be wireless charging.
- The wireless charging function on can work simultaneously with the disinfection function.
Important Notes
- Do not squeeze or collide vigorously.
- Please do not disassemble or throw it into fire or water in the state of power supply to avoid short circuit leakage
- Please do not use it under severe highly temperature, high humidity or corrosive environment to avoid leakage of the damaged circuit.
- Please do not place the magnetic card (ID card, bank care etc.) with magnetic stripe or chip on the charging board to avid the invalidation of the magnetic card
- Please do not place metal (coy request metal objects) on the charging board during charging so as not to cause heat damage.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device pursuant to Parl 15 of the FCC Rule s These
limits are designed to provide reasonable protection against harmful
interference n a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation If this equipment does cause harmful
interference to radio or televisual reception which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna – Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit di fernet from that to which the receiver is connected.
- Consult the dealer or am experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use on y the supplied an tenna