HermanMiller FE1L Cyclade Occasional Table Instruction Manual
- June 12, 2024
- HermanMiller
Table of Contents
Cyclades Occasional Table Installation
Instructions (FE1L, FE1M, FE1T, Wood (W) or
Stone (S) top)
Parts Included
How to assemble your occasional table
WARNING
Heavy!
Exercise caution when lifting
Step 1
1.1 Place the table top on a clean protective surface top down.
WARNING
Failure to fully tighten legs could result in table failure, legs breaking or
other damage.
Step 2
2.1 Align leg over assembly hub and lower until internal threaded stud is
inserted in center hole of attachment hub.
2.2 Screw the leg into the attachment hub until it cannot be tightened anymore
and leg tight against the surface of the top.
Step 3
3.1 Repeat steps 2 and 3 until all legs are attached and tight.
Step 4
4.1 Place table right side up in desired location.
Step 5 (Optional)
5.1 Lower the Cyclades bowl gently into the opening in your table.
Note: Install Cyclades Glass Bowl (if applicable) into center of the low
height table.
For more information about our products and services please visit us at
hermanmiller.com or call (800) 851 1196.
©2023 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. 1BVMDF
– A
Herman Miller Cyclades table
1BVMDF rev A
Installation Instructions
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>