Danfoss FC 51 De Coupling Plate Installation Guide
- June 10, 2024
- Danfoss
Table of Contents
Danfoss FC 51 De Coupling Plate
Product Information
Specifications:
- Model: FC 51
- Mounting Compatibility: M1 and M2
- Fastening Torque: 2 Nm
Product Usage Instructions
Step 1: Mounting the Metal Plate
- Place the metal plate on the drive unit.
- Fasten the metal plate using two M4x9 screws.
- Ensure the tightening torque is 2 Nm for each screw.
Step 2: Mounting the Bracket on the De-coupling Plate
- Attach the bracket securely onto the de-coupling plate.
- Use one M4x9 screw and two M4x10 screws for this step.
Step 3: Installing VLT Micro Drive FC 51
Mount the VLT Micro Drive FC 51 onto the de-coupling plate assembly.
Frequently Asked Questions (FAQ)
-
Q: What is the recommended tightening torque for the screws?
A: The recommended tightening torque for the screws is 2 Nm. -
Q: Can this de-coupling plate be used with other drive models?
A: This de-coupling plate is specifically designed for use with VLT Micro Drive FC 51 and mounting compatibility with M1 and M2 drives.
Mounting Instruction
FC 51 De-coupling Plate Mounting Instruction for M1 and M2
Step 1
Mount metal plate on the drive and fasten with two screws. Tightening torque:
2 Nm.
Step 2
Mount the bracket on a de-coupling plate.
Step 3
VLT Micro Drive FC 51 mounted with de-coupling plate.
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are the property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss NS. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>