A S TWS200 True Wireless Earbuds User Manual
- June 5, 2024
- A S
Table of Contents
A S TWS200 True Wireless Earbuds
Bluetooth Pairing
- Pairing your device for the first time: First step – Please make sure the headset is fully charged before starting pairing. the headphones and charging case are packaged separately.
- Second step Remove the right earphone from the charging case and it will automatically enter pairing mode. Startup sound, Power On indicator flashes quickly.
Bluetooth Pairing
Third step – Go to the Bluetooth menu in your device. Select “A&S Batman” Make
a connection The fourth step – Remove the left earphone from the charging
case,It will automatically connect the right earphone. Second pairing:When
removing the headset from the charging case, The wireless connection is
established automatically.
When put in the charging case, the headset will automatically turn off and start charging.
TWS Operation
Press and hold for 5 seconds to switch on manually
Clear Binaural Pairing
Touch the left or right ear three times in unpaired mode (third press and hold
for 3 seconds)
Charging Case
Specifications
- Speaker Size: cp6mm
- Speaker Impedance: 16Q
- Frequency Range: 20Hz-1 0kHz
- Sensitivity: 99 ± 3dB
- Bluetooth Version: 5.0
- Bluetooth Technology: 2.4G
- Bluetooth Protocol: HSP, HFP, A2DP, AVRCP
- Bluetooth Transmission Distance: 10-15M
- Charging Box Charging Method: CD Type-C @ Wireless Charging
- Charging Box Charging Voltage: DC5V ~ 6V
- Charging Case Charging Current: 0.4A
- Charging Case Standby Power Consumption: 75uA
- Charging Box Output Current: 0.5A
- Charging Time: 1.5H
- Charging green light lHz blinks. Full green light is always on.
- Discharge blue light is always on. Low battery blue light flashes at lHz.
- Charging Box Battery: 500mAh can charge the TWS 3-4 times
- TWS Battery: 50mAh 2pcs
- TWS Charging Method: Put into the charging box with the contact of the thimble contact to charge
- TWS Charging Current: 45mAh
- TWS Charging Time: 1.2H
- TWS Full Playback Time: 6H-8H
-
-
- TWS Function Switch Working Mode: Touch
-
- TWS Waterproof Rating: IPX5
Precautions
Avoid Hearing Damage
WARNING:
permanent hearing loss may occur if heaphones are used at high volume. Set the
volume to a safe level. You can adapt over time to a higher volume of sound
that may sound normal but can be damaging to your hearing. If you experience
ringing in your ears of muffled speech, stop listening and have your hearing
checked. The louder the volume, the less time is required before your hearing
could be affected. Hearing experts suggest. That to protect your hearing:
- Limit the amount of time you use the headphones at high volume.
- Avoid turning up the volume to block out noisy surroundings.
- Tum down the volume if you can’t hear people speaking near you.
WARNING:
To prevent possible hearing damage, do not listen at high volume levels for
long periods
Keep Out of Reach of Children
WARNING: the small parts included with product can be a choking hazard. This
product is not intended for use by small children and should be kept away from
children under 3 year of age.
Do Not Use While Driving
Use of headphones while operating a vehicle is not recommended and is illegal
in some areas. Check and obey the applicable laws and regulations on the use
of headphones while operating a vehicle. Be careful and attentive while
driving. Stop listening to your audio device if you find it disruptive or
distracting while operating any type of vehcile or performing another activity
that requires your full attention.
In case of skin Irritation
Headphones can lead to ear infections if not properly cleaned. Clean the
earbuds frequently with an antiseptic such as ispropyl alcohol. If a skin
problem develops discontinue use. If the problem persists, cinsult a
physician.
Avoid Electrostatic Shock
When using heaphones in areas where the air is very dry, it is easy to build
up static electricity and possible for your ear to receive a small
electrostatic discharge from the headphones. To minimize the risk of
electrostatic discharge from the headphones in extremely dry environments, or
touch a grounded unpainted metal object before inserting the headphones.
Disposal and Recycling
This symbol indicates that this product and/or battery should not be disposed of with household waste. When you decide to dispose of this product and/ of its battery, do so in accordance with local environmental laws and guidelines program.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or morAe
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction