Denver BTL-62 Bluetooth Speaker Instruction Manual
- June 5, 2024
- Denver
Table of Contents
Instruction Manual
Bluetooth Speaker
BTL-62
www.denver-electronics.com
Before operating this product, please read this instruction manual carefully
and completely.
Operation Instruction
When you turn on the speaker, it will by standard start in the Bluetooth
model. You can then easily pair it with your smartphone or PC with Bluetooth
function. If you don’t pair it within 10 minutes, the speaker will go into
sleep mode, and you have to turn it off/on to pair again.
Press the “M” button to switch functions,
Button Instruction :
- : Power Key
- LINE port：3.5 audio input port
- Play/Pause： Pause and play in play mode. in Bluetooth mode, when calling, that is the answer key and hangs up keys, Double-click, and redial the last phone number.
- Volume down/Next: Long press to decrease volume. In FM mode, short press to switch PRE frequency, In music mode, short press to switch the previous song.
- + Volume up / PRE: Long press to increase volume, In FM mode, short press to switch to next frequency, In music mode, short press to switch to next song
- M – mode switch： switch to FM radio mode, in “FM” mode, long press 3 seconds to Tune.
(Note: short press=hold the key for less than 1 second, Long press=hold the key for about 3 seconds )
Light control button:
**How to turn ON and OFF
**
Long press the key to turn ON and long-press the key to turn OFF.
How to connect Bluetooth devices (Mobile
Phone / Laptop /iPhone /IPAD, etc )
- Turn on the speaker and make sure it is in Bluetooth mode. The blue indicator flashes, and a beep sounds.
- Enter Bluetooth settings on your smartphone or PC, find BTL-62 on the list over Bluetooth units, and choose it to pair.
- After successful pairing, the speaker will give a beep, and on your phone, it will show that the speaker is connected.
- After a successful connection, Bluetooth devices can play to the speaker. The blue light will flash slowly when it is in Bluetooth play mode.
How to use AUX input mode.
In any mode, insert 3.5mm into the Bluetooth speaker, and to the audio source, you want to listen to. The Bluetooth speaker will automatically change to AUX input.
How to operate FM radio
Press M to enter FM mode. Then long press M to make automatically search for channels. The blue indicator flashes. When finished, the system will automatically play the first found station. Short press + or to change stations.
Note: Please insert a USB cable for better FM receival. It works as an antenna.
How to charge the speaker
Please charge the speaker before first-time use. Plug one part of the USB charge cable into the speaker Micro USB port, and the other part into a computer USB port or an external USB adaptor (not included). Charging the battery fully may take up to 6 hours (first time please extend charging time). When charging has finished the red indicator will turn off.
FAQ
Cannot connect and play
- Check Bluetooth settings on your phone or PC. (some pics cannot be used for Bluetooth audio)
- Check if the speaker is properly charged. If the red indicator flashes when you turn on the speaker, please charge it.
- Please turn off, pair the Bluetooth unit again, and try once more.
*If the above doesn’t solve your problems, please contact the store where it is bought.
Bad radio reception
★ Re-search the station in an open place
★ Insert a USB cable as an external antenna to enhance reception
Specifications:
Speaker Specification：40MM×3W
Output：3W2
Frequency Response：200Hz-20KHz
Sensitivity：100db±5db
SNR:≥90DB
Distortion：≤5 ％
Bluetooth specification：Bluetooth 2.1
Bluetooth Communication Protocol： Support Advanced Audio Transmission Mode(
A2DP) Ver 1.2 Supports remote control mode (AVRCP) support Ver 1.0 Bluetooth
Communication Range up to 10M
Power Supply： Built-in Lithium
Charging Time：6 hours（first time, please extend the charging time ）
Bluetooth Play Time：8 hours
Adapter： Micro USB Port, 3.5 AUX input Port
Dimension：7676*174mm
Electric and electronic equipment and included batteries contain materials,
components, and substances that can be hazardous to your health and
environment if the waste material (discarded electric and electronic equipment
and batteries) is not handled correctly.
Electric and electronic equipment and batteries are marked with the crossed-
out trash can symbol, seen below. This symbol signifies that electric and
electronic equipment and batteries should not be disposed of with other
household waste, but should be disposed of separately.
As the end-user, it is important that you submit your used batteries to the
appropriate and designated facility. In this manner, you make sure that the
batteries are recycled in accordance with the legislature and will not harm
the environment. All cities have established collection points, where electric
and electronic equipment and batteries can either be submitted free of charge
at recycling stations and other collection sites or be collected from
households. Additional information is available at the technical department of
your city.
Hereby, Inter Sales A/S declares that the radio equipment type BTL-62 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://www.denverelectronics.com/denver-BTL-62/
Operating Frequency Range: 2.402-2.480GHz
Max Output Power: 2.06dBm
Imported by:
DENVER ELECTRONICS A/S
Omega 5A, Soften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
www
.denver-electronics.com