Neomounts FPMA-D890WHITE Monitor Desk Stand Instruction Manual
- June 5, 2024
- Neomounts
Table of Contents
Neomounts FPMA-D890WHITE Monitor Desk Stand
PARTS
INSTRUCTIONS
STEP 1: Assemble the desk mount
STEP 2: Attach the VESA plate to the monitor
STEP 3: Install the monitor
STEP 4: Route the cables
STEP 5: Adjusting angle
Caution
- To ensure satety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place tor future reference.
- The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
- The mount is designed tor easy installation and removal. The manutacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquake or typhoon. is recommended tnat the mount de instdied oy quained personner Ony et the area where the mount is to be installed: avoid hazard of falling objects.
- Avoid places that are subject to high temperatures, humidity or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain suthcient space around the display to ensure adequate ventilation.
- To ensure safe installation, hirst check the structure of the wall, ceiling or toor and select a secure mounting location.
- The wall, ceiling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earhquake or other strong shock.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
- Please consuit the English language manual tor any dispute on conditions.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>