TurboTronic TT-LUX900 3-in-1 Wet & Dry Cordless Stick Vacuum Cleaner Instruction Manual

TurboTronic TT-LUX900 3-in-1 Wet & Dry Cordless Stick Vacuum Cleaner

PARTS DESCRIPTION

1. On/off switch
2. speed control switch
3. Button for removing handheld vacuum cleaner
4. On/off switch for handheld item
5. Release buttons for removing dust tank
6. 22.2V Battery
7. Handheld item
8. HEPA center filter
9. Filter holder
10. Dust compartment
11. 2in1Crevice nozzle
12. Adaptor
13. Brush roller
14. The lid for water tank
15. Water tank
16. Cloth

SAFETY

• By ignoring the safety instructions the manufacturer can not be hold responsible for the damage.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• Never move the appliance by pulling the cord and make sure the cord can not become entangled.

• The appliance must be placed on a stable, level surface.

• This appliance is only to be used for household purposes and only for the purpose it is made for.

• This appliance shall not be used by children from 0 year to 8 years. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children unless older than 8 and supervised.
  To protect yourself against an electric shock, do not immerse the cord, plug or appliance in the water or any other liquid.

• The plug must be removed from the socket outlet before cleaning or maintaining the Appliance

BEFORE THE FIRST USE

Installation of the appliance

• Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the device.
• Assemble the vacuum cleaner by attaching the handle to the device
• Plug the adapter (12) in the hole as below of item and in the wall outlet

Charge

• link the device and power station with adaptor . Note: Always make sure that the device is turned off. The indicator lights will come on once the device has made contact with the device .
• It takes 4.5 hours to fully charge the batteries before the first use.
• When the device is totally discharged, approximately 4-4.5 hours charging is required for the battery to regain full capacity.
• In order to ensure that it is always ready for use, the device should be left on charger when not being used.
• The adaptor may become warm during charging, this is normal.

USE

• You should regularly check that 2-in-1 Crevice nozzle (11) and the brush roller (13) are clean in order to avoid scratching sensitive floors.
• Start the device by pushing the on/off button (1) and control the high speed and low speed by pushing the speed control switch (2).
• For tables, furniture and car seats you can remove the hand unit by pressing in the release button(3). The hand unit will now come free and can easily be removed, and it can be started by On/off switch for handheld item (4).
• The2in1Crevice nozzle (11) can be fitted in order to reach awkward places and you switch it to be brush or Crevice nozzle by your hand as below
• Open The lid for water tank (14) to fill the water tank (15)with water and lock it up , assemble the water tank (15) and the cloth（16）to device ,and start the device as normal , then you can Sweep the floor by it!

CLEANING AND MAINTENANCE

Emptying and cleaning the dust compartment/filter

• Release the hand unit out of the handle
• Remove the whole dust container (10) by pressing the release button (5) and turn the dust container.
• Pulling out the filters (8 & 9) and emptying the contents of the dust container into a suitable vessel or bag.
• The dust container and the filter can be cleaned and rinsed with warm water. Make sure the parts are dry before they are assembled.
• Assembling the parts by following up the opposite procedures when detaching the dust container.

Cleaning the electric turbo brush

• If the roller brush becomes blocked or jammed for any reason, the vacuum will be lower down. Than the roller brush have to be cleaned.
• Carefully open the releasing slider as the pic below
• Lift out the roller brush and clean it.
• After cleaning you can assemble the turbo brush by following the opposite procedures.

Do not forget to Cleaning the wheels too.

• If a wheel is jammed by threads or dirt, to prevent wear you need to clean this by time.
• Remove the wheels by carefully prizing them loose using a screwdriver inserted into the cavity and lift them up.
• Remove threads or any other objects that may have become jammed in the wheel’s axles. Reassemble the wheels by pressing them back in the floor brush.

wash the water tank and the cloth
When you finished the sweeping by water tank faction, you should take apart the cloth, wash it and dry it, or you can change it by a new cloth.

Change the battery
The battery (6) can be used over 1000 cycle, if the battery (6) has been damaged, you can buy a new one to change it, the battery is removable by pressing the releasing button as below:

ENVIRONMENT

This appliance should not be put into the domestic garbage at the end of its durability but must be offered at a central point for the recycling of electric and electronic domestic appliances. This symbol on the appliance, instruction manual and packaging puts your attention to this important issue. The materials used in this appliance can be recycled. By recycling of used domestic appliances, you contribute an important push to the protection of our environment. Ask your local authorities for information regarding the point of recollection.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>