vtech 5528 My First Kidi Smartwatch Instruction Manual

vtech 5528 My First Kidi Smartwatch

INTRODUCTION

Thank you for purchasing My First Kidi™ Smartwatch. This digital doggie can help kids keep track of all their daily routines. Create repeating reminders for potty training, nap time, meals and more with this smart, interactive watch. Give the pup a name, then feed, walk and groom them using the touch screen. Time-telling tools are also included to help kids learn to tell time.

INCLUDED IN THE PACKAGE

• My First Kidi™ Smartwatch
• Micro-USB cable
• Quick Start Guide

WARNING
All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords and packaging screws are not part of this toy, and should be discarded for your child’s safety. The label covering the LCD screen of the product is packing material, please remove this label before use.

NOTE
Please save this Instruction Manual as it contains important information.

ATTENTION
Pour la sécurité de votre enfant, débarrassez-vous de tous les produits d’emballage tels que rubans adhésifs, feuilles de plastique, attaches, étiquettes, cordons et vis d’emballage. Ils ne font pas partie du jouet.

NOTE
Il est conseillé de sauvegarder ce manuel d’utilisation car il comporte des informations importantes. This toy is only to be connected to equipment bearing either of the following symbols: or

WARNING
Adult needed to remove small packaging screw.

Unlock the Packaging Locks

1. Rotate the packaging lock counterclockwise several times.
2. Pull out the packaging lock and discard.

PRODUCT SPECIFICATION

Connectivity (unit to unit)

| Connect to another My First Kidi ™ Smartwatch to play games and send emoticons (best communication range within 16 feet)
Battery| Li-ion battery (not replaceable)
Optimum Operating and Charging Temperature| 32°F – 104°F (0°C – 40°C)

WARNING
People with very sensitive skin may notice some irritation after wearing the My First Kidi™ Smartwatch for extended periods of time. The skin may become irritated when moisture, sweat, soap, or other irritants get trapped under the wristband and are left in contact with the skin. To prevent this, we suggest children remove the watch before going to bed for the night, take the watch off if it’s feeling uncomfortable, and keep their wrist and the band clean and dry.

In addition, wearing the watch too tightly may also cause irritation. Make sure the fit is good – tight enough so the watch stays in place but not so tight that it’s uncomfortable. If you notice any redness, swelling, or other irritation, you may want to consult a doctor before wearing the watch again.

GETTING STARTED

Master Power Switch
When you use My First Kidi™ Smartwatch for the first time, you will need to slide the Master Power Switch (located on the underside of the watch) to the On position (-). You may need a small tool such as a paper clip to move the switch to the On position. Fully charge the watch before first use. When the Master Power Switch is set to the Off position (o), the unit will not function and the battery will not charge. Only move the switch to the Off position when the watch will not be used for an extended period of time. Note: It is not necessary to turn the watch off in daily use. Once the Master Power Switch is Off, the watch will stop functioning. After it is turned On again, the time and date will have to be reset.

BATTERY RECHARGING

Note: Adult operation required.

The watch should be fully charged before first use. To charge the My First Kidi™ Smartwatch, connect the watch to a computer using the included Micro-USB Cable. To do so correctly, please follow these steps:

• Make sure that the Master Power Switch is set to the On position before charging.
• Pull up the rubber cover of the Micro-USB Port on the side of the watch.
• Insert the Micro-USB Cable (small end) into the Micro-USB Port on the watch.
• Insert the large end of the Micro-USB Cable into a USB port on your computer.
• Once the connection is successful, you will see a battery charging symbol appear on the watch screen.
• Check the charging progress regularly throughout recharging.
• When the battery is fully charged, the fully charged battery icon will appear. Then the screen will automatically turn off. You may then disconnect your fully charged watch from the computer.

Note:
It will take approximately 3.5 hours to fully charge the battery. The actual charging time depends on the charging current, the remaining charge in the battery prior to recharging, and the ambient temperature. The optimum ambient temperature is 32°F – 104°F (0°C to 40°C).

CHARGING GUIDELINES
To charge the My First Kidi™ Smartwatch, use only the included Micro-USB cable to connect to a computer or other equipment with a USB port (Output DC 5V 1A) and bearing the following Class II or III
symbol. Do not charge using a third-party adapter. Before use, inspect the cable to confirm that it is in good condition and that there are no breaks or exposed wires. Ensure there are no particles or liquid (water, juice, etc.) in either of the connectors before plugging at either end of the cable. The device should be completely dry with no debris in the cable connectors when charging. Plug in the cable securely, in the correct orientation. Never leave the device unattended while charging. Do not charge your device on soft surfaces, as they can trap heat around the device. The typical charging time is approximately 3.5 hours if the battery is fully depleted. Disconnect the device when it is fully charged. Do not leave the device charging for more than four hours. Examine the charging cord periodically for conditions that may result in the risk of fire, electric shock, or injury to persons such as damage to the cord, housing, or other parts. In the event of such conditions, the cord should not be used until properly repaired or replaced.

BATTERY LIFE
The time the battery lasts between charges depends on the play. Like other electronic devices, more frequent usage will drain the battery more quickly. The remaining battery capacity will appear in the top right corner of the screen. When the battery level is low, recharge the battery before further use. When the battery level is too low, the watch will not turn on until it is recharged. If you find the time between charges is considerably shortened with no change in usage, the battery could be nearing the end of its life. The battery life varies from battery to battery depending on storage, operating conditions, and environment.

BATTERY TIME FOR REFERENCE

Note:
The above battery time assumptions are based on the screen display set to turn off when not in use. Please see the Settings section for more details about this option.

BATTERY MAINTENANCE
Charge the battery regularly to keep it operating at optimum performance, even when the watch isn’t in regular use. For example, charge the watch at least once every six months. Slide the Master Power Switch to the Off position if the watch will not be in use for an extended period of time.

BATTERIES CAN NOT BE REPLACED
The batteries within this toy are permanently encased. Before giving this toy to a child make sure there are no signs of damage. Regularly check the toy and dispose of it immediately if there are any signs of damage. Do not dispose of the toy in a fire, as the batteries may leak and explode. Keep batteries safely out of children’s reach before disposing of them via a safe disposal system. The battery in this product must not be disposed of with household waste. This battery is recyclable. Please follow your local recycling regulations.

WARNING MESSAGES

SPLASH-PROOF FOR EVERYDAY PLAY

• Do not put it under running water.
• Do not submerge in water. Not suitable for showering, bathing or swimming.
• Keep the rubber cover over the Micro-USB Port closed tightly while it is not in use in order to prevent water damage.

QUICK GUIDE ABOUT ALARM AND ALERT SOUNDS

My First KidiTM Smartwatch can help to remind kids of good habits. The following table indicates the different alarms and reminders available on the watch.

TO BEGIN USING MY FIRST KIDI™ SMARTWATCH

Make sure the Master Power Switch is set to the On position and that the battery is fully charged before using the watch.

Select a Language
The first time you turn On your watch, press either the Home Button or the Clock Button. The language selection screen will appear. Simply tap your preferred language, then tap the Check Mark icon.

Set Date and Time
Next, the date and time screens will display. Swipe up or down over the month, day, year, hours and minutes to set the current date and time. Tap the Check Mark icon when you’re done.

Name Your Pet
Tap on the Arrow icons to select the pet name and name tag icon you would like to use. Tap the Check Mark icon when you’re done.

To Begin Play
Press the Clock Button to display the clock screen. Press the Home Button to go to the Home Menu to access different activities and settings.

AUTOMATIC SCREEN OFF
To preserve battery life, the screen will automatically shut off after a short period of time when in Clock Mode.

Note:
The auto screen-off time can be adjusted. Please refer to the Settings section in this guide. From other activities, the watch screen will return to Clock Mode automatically if there is no input for a period of time. The auto time out depends on different types of activities.

ACTIVITIES

Clock Mode
When the screen is off, press any buttons to show the clock screen.

• Swipe left or right to see more clock faces.
• Double-tap the screen to listen to the current time.
• Swipe in from the top or bottom of the screen to display the Speak Time icon , Volume icon and Light icon . Tap the Speak Time icon to hear the current time. Tap the Volume icon to toggle between volume on or mute. Tap the Light icon to turn the light ring on/off and change the light color.

Note: Hold the Clock Button for approximately 2-3 seconds to turn off.

Home Menu

Press the Home Button to display the Home Menu and choose an activity. Swipe left or right to scroll through the menu pages and tap an icon to enter the activity.

Note:
If games are turned off in Settings, the icons for Games and 2-Watch Connection will be locked in the Home Menu.

1. Pet Mode
2. Feeding Time
3. Wash Time
4. Take a Walk
5. Training
6. Silly Talk
7. Games
8. 2-Watch Connection
9. Time Master
10. Feelings & Emotions
11.  Balloon Breathing
12. Music Player
13. Alarm
14. Timer
15. 16. Reminders
16. Settings

Pet Mode
Explore your pet’s different expressions and reactions by tapping on the screen or by swiping from the top or bottom or left or right or in any direction of the screen.

Feeding Time
Swipe left or right or tap on the arrows to select a food to feed your pet.

Wash Time

• Brush Teeth
  To brush your pet’s teeth, move the toothbrush over their teeth by swiping back and forth over the screen.

• Take a Bath
  To give your pet a bath, move the sponge and shower head over your pet by swiping back and forth over the screen.

• Potty Time
  Tap on the Potty Time icon to take your pet outside to go potty.

Take a Walk
There are two activities to do when walking

a dog, Jump Rope and Butterflies Valley.

• Jump Rope
  Play jump rope with your pet by tapping the screen to make them jump over the rope.

• Butterflies Valley
  Take pictures of butterflies on your walk by tapping on a butterfly as it flies by.

Training

Swipe the screen as directed and watch your pet perform the trick! Tap the Light Bulb icon in the top left corner if you need help teaching the tricks.

Silly Talk
Say silly things to your pet and they will listen and repeat it. For best performance, try to speak closer to the microphone. The microphone is located on the right side of the watch.

Games
There are three games on the My First Kidi™ Smartwatch.

• Doggie Jump
• Sneaky Toy
• Odd One Out

Doggie Jump
Help your pet cross the river by jumping on the stones. Tap the Step buttons to tell your pet to jump one or two stones. Try to collect as many bones as possible along the way.

Sneaky Toy
Tap the Start button to hide a toy under a basket. Watch as the baskets shuffle around. Tap on the basket you think is hiding the toy.

Odd One Out
Find the image that looks different from the others. Tap on it to see if you’re right!

2-Watch Connection
You can connect your My First Kidi™ Smartwatch with your friend’s My First Kidi™ Smartwatch to play games and send Emoticon. Tap the top connection icon to play, tap the bottom icon to change the name tag.

Only two watches can connect at a time. This function is only supported with other My First Kidi™ Smartwatch devices (additional watches sold separately).

Note:
The best connection range is within 16 feet. To connect two My First Kidi™ Smartwatch devices, tap on the Connection icon in the Menu. Select the same room on both watches. A “Connected!” message will appear on the screen when the devices have successfully paired. To disconnect, scroll over and tap on the “Disconnect” option in the menu.

After connecting with other My First Kidi™ Smartwatches, there are three connection activities for selection.

• Magic Show
• Balloon Ride
• Send Emotion

Note:
To play the connection games, you and your friend must open the same game.

Magic Show
Watch funny animations and send magic tricks to your friend’s pet.

Balloon Ride
Have a balloon race with your friend and their pet. Blow into the microphone to blow up the balloon and see how far it goes!

Send Emoticon
In this app, users can send any emoticons in the selection page or view the most recently sent and received Emoticons in the chat history page

To send an Emoticon, tap to switch to the selection page, choose any of the small icons and then tap the Check Mark icon to send.

Note:
It can save the latest 25 emoticons in the chat history page. The chat history will be deleted after exiting the activity.

Time Master

• Tap on the clock or the pet to hear the time spoken.
• Tap the Hour or Minute icon to toggle between adjusting the hour or minute.
• Tap the Plus or Minus icon to adjust the time by one hour or minute.

Feelings & Emotions
Show your emotions by tapping on an icon. Your pet will respond by playing games and other activities depending on how you’re feeling.

Balloon Breathing
Use deep breathing exercises with your pet to blow air into the balloon and up into the sky.

Music Player
Listen to relaxing music or nursery rhymes and watch as the Ring Light changes to the music style.

• Tap the Volume icon to set the volume.
• Tap the Play icon to listen to music. When the music begins playing, the button will switch to a Pause button.
• Tap the Music Style button to change the music.

Note:
When adjusting the volume in Music Player, the volume for all activities on the watch will also change.

Alarm
Set an alarm by choosing from a selection of alarm tones.

• Tap the Time or Alarm icons to change the alarm time.
• Tap the Bell icon to toggle the alarm On or Off.

To set the alarm time:

• Select the hour and minute by swiping up or down on the hours, minutes, and AM/PM.
• Tap the Tone icon to display the Alarm Tone Selection menu. Swipe left or right to preview the different tones. Tap the Check Mark icon to confirm your selection.

Timer
Use this app to set a countdown timer.

• Tap the Play icon to start the timer immediately.
• Swipe left or right or tap the arrows to change the timer style.
• Tap the picture or the displayed time to enter Timer Settings. Swipe up or down on the minutes and seconds to change the time. Once set, tap the green Check Mark to confirm.
• While the timer is running, tap the Pause icon to pause the countdown and tap it again to resume. Tap the Timer Reset icon to stop the countdown and reset the timer.

Reminders
With Daily and Good Habit Reminders, you can set your watch to help remind you of important activities.

Daily Reminder

• Tap the Add Reminder icon on top of the screen and then tap the Daily Reminder icon to create a new Daily Reminder.
• Select an event icon you would like to set. Then swipe up or down on the hour and minute to set the event time.
• Tap the Check Mark icon when you are done.

Good Habits Reminder

• Tap the Add Reminder icon on top of the screen and then tap the Good Habit Reminder icon to create a new Good Habit Reminder. The Good Habit Reminder will ring at an interval during the set period.
• Select an event icon you would like to set. Then tap the Arrow Buttons to set the reminder for every 30, 60, or 90 minutes or to turn it off.
• To select a start and end time for your reminders, tap on the AM and PM times. Swipe up or down to select the hour and minute. Then press the Check Mark icon to confirm.
• When you did, tap the Check Mark icon to confirm the reminder.

Edit the Existed Reminders

• The created reminders are listed by time from morning to evening.
• Tap a Reminder Bell icon to select remind once, every day, or to turn it off if it is a Daily Reminder.
• Tap a Reminder Bell icon to select remind every 30, 60, or 90 minutes or to turn it off if it is a Good Habit Reminder.
• Tap a Reminder icon to edit it or delete it from your list.

Settings
Swipe left or right to scroll through the options:

• Volume
  Tap the Plus or Minus icon to set the system volume.

• Brightness
  Tap the Plus or Minus icon to set the screen’s brightness.

• Light
  Tap the On/Off icon to set the ring light on or off.

• Date
  

  • Tap the Set icon to display the Date Setting Screen.

  • Swipe up or down on the month, day, and year to set the date.

  • Tap the Date Format icon to change the date format
    (DD/MM/YYYY or MM/DD/YYYY).

  • Tap the green Check Mark icon to save.

  • Time

  • Tap the Set icon to display the Time Setting Screen.

  • Swipe up or down on the hours, minutes, and AM/PM to set the time.

  • Tap the green Check Mark icon to save.

Woof Woof Clock
There is an hourly time signal with a “woof woof” sound. Once it is set on, your pet will happily bark to your every hour. Tap the Set icon to display the Woof Woof Clock setting screen. Tap the On/Off icon to set the Woof Woof Clock on or off. If it is set to on, the My First Kidi™ Smartwatch will make a “woof” sound at the beginning of every hour from 7 AM until 7 PM.

Pet Tag
Tap the Set icon to select your pet’s name and name tag badge. Tap the Arrow icons to select a name. Tap the Check Mark icon to confirm.

Language

• Tap the Set icon to display the Language setting screen.
• Tap the language you would like to select, then tap the Check Mark icon to save.

Advanced Settings

Auto Screen Off
Set an Auto Screen Off timer. Tap the left and the right arrows to set the time, then tap the green Check Mark icon to confirm. Selecting Disable Auto Screen Off will not turn off the screen, but the screen will dim if there is no input for 30 seconds in Clock Display mode to save power.
Tip: If the Auto Screen Off time is set to one of the longer options, battery consumption will increase and the time the battery lasts will decrease.

Parental Controls

• School Mode
  Access these settings to set the School and Game Limit modes. Tap this icon to display the School mode settings screen. You can set a repeating time at which the mode will start and end, and also set whether the watch will automatically enter this mode on weekdays, weekends, or every day. During the School mode period, only the selected clock face will be displayed on the watch screen. Other activities cannot be accessed.

• Game Limit
  Tap this icon to display the Game Limit mode settings screen. You can either disable games or set a daily time limit. By default there is no time limit set. You can choose a limit of 15, 30, 60 or 90 minutes per day. Once a time limit is reached, games will not be accessible until the following day. When games are disabled, the icons for Games and 2-Watch Connection will be locked in the Home Menu.
  Tip: The Parental Controls settings are designed for parents of children who cannot yet read, as access to the menu is granted by following simple, on- screen instructions.

Factory Reset

• Factory Reset will reset all system settings to factory defaults.
• FCC Compliance Statement
  This page confirms that this product complies with FCC regulations.

Care & Maintenance

1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat sources.
3. Turn the watch Off at the Master Power Switch if it will not be in use for an extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.

WARNING
A very small percentage of the public, due to a pre-existing condition, may experience epileptic seizures or momentary loss of consciousness when viewing certain types of flashing colors or patterns. Please consult your doctor if you have an epileptic condition or experience any unusual symptoms while playing. Turn off the light if you do not feel comfortable. While the My First Kidi™ Smartwatch does not contribute to any additional risks, we do recommend that parents supervise their children while they play games. If your child experiences dizziness, altered vision, disorientation, or convulsions, discontinue use immediately and consult your doctor. Please note that focusing on the My First Kidi™ Smartwatch at close range or using it as a game controller for a prolonged period of time may cause fatigue or discomfort. We recommend that children take a 15-minute break for every hour of play.

TROUBLESHOOTING

Check this section if you experience difficulty operating My First Kidi™ Smartwatch.

The watch has stopped working

| 1. Turn the Master Power Switch Off for 30 seconds.

2. Turn the Master Power Switc h On again and then press any button to turn the watch on. It should now work properly.

3. If the watch doesn’t work, recharge the battery and repeat steps 1 and 2.

(Refer to the battery recharging section for details)

The screen is not working correctly

| 1. Turn the Master Power Switch Off for 30 seconds.

2. Turn the Master Power Switch On again and then press any button to turn the watch on. The screen should now function normally.

Cannot connect in 2-Watch Connection

| 1. My First Kidi ™ Smartwatch can only connect with another My First Kidi ™ Smartwatch , other devices are not compatible.

2. Only two watches can connect at a time.

3. The best connection range is within 16ft Make sure both My First Kidi ™ Smartwatch devices are within range.

The alarm keeps on ringing from time to time

| If there is an alarm or some notification or alert sound keeps on ringing from time to time. There may be some setting that has been set on. Check if :

1. The Alarm has been set on; and/or

2. The Reminders have been set on; and/or

3. The Woof Woof Clock has been set on.

You can refer to the section of this user manual.

IMPORTANT NOTE:

If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S., 1-877-352-8697 in Canada, or visit our website vtechkids.com and fill out our Contact Us form located under the Customer Support link. Creating and developing VTech® products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions you might have. A service representative will be happy to help you.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Supplier’s Declaration of Conformity

47 CFR § 2.1077 Compliance Information

• Trade Name: VTech®
• Model: 5528
• Product Name: My First Kidi™ Smartwatch
• Responsible Party: VTech Electronics North America, L.L.C.
• Address: 1156 W. Shure Drive, Suite 200, Arlington Heights, IL 60004
• Website: vtechkids.com.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

To access this compliance statement from the product software:

1. From the Main Menu, choose the Settings icon.
2. Go to the Advanced screen and tap Set.
3. Choose FCC Compliance Statement to see the statement.

CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Visit our website for more information about our products, downloads, resources, and more.

• vtechkids.com
• vtechkids.ca

Read our complete warranty policy online at vtechkids.com/warranty. vtechkids.ca/warranty.

References

• VTech Canada | Official Electronic Learning Toys & Games for Kids
• VTech Canada | Official Electronic Learning Toys & Games for Kids
• Best Kids Tech Toys | Electronic Learning Toys | VTech America
• Best Kids Tech Toys | Electronic Learning Toys | VTech America

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>