JBL Waterproof Portable Bluetooth Speaker User Guide
- June 7, 2024
- JBL
Table of Contents
JBL Waterproof Portable Bluetooth Speaker User Guide
What’s in the box
Buttons
Connections
Bluetooth®
Bluetooth connection
Music control
Speakerphone
Voice assistant
Tap “Voice Assistant ” in the JBL Connect app, to make the “[>” button as the activation key of Siri or Google Now on your phone.
Press the “I>” button on the speaker to activate Siri or Google Now on your phone. Please make sure the Siri or Google Now is enabled on your phone.
JBL Connect+
Wirelessly links 100+ JBL Connect+ compatible speakers together.
Play music on one of you JBL speakers and than press the JBL Connect+ button on all desired speakers to start pairing. All the other JBL speakers will play same music from the music source
Download the JBL Connect app for the following features: stereo setup, firmware upgrade, and device renaming .
LED Behavior
Warning
JBL Rip 4 is IPX7 waterproof.
IMPORTANT : To ensure t ha t the JBL Flip 4 is waterproof, please remove all cable connections and tightly close the cap: exposing the JBL Flip 4 to liquids without doing so may result in permanent damage to the speaker. And do not expose JBL Flip 4 to water whi le charging, as doing so may result in permanent damage to the speaker or power source. IPX7 waterproof is defined as the speaker can be immersed in water up to 1 m for up to 30 minutes.
Specifications
• Bluetooth version : 4.2
• Support: A2DP V1 .3, AVRCP V1 .6, HFP V1 .6, HSP V1 .2
• Transducer: 2 x 40mm
• Output power: 2 x aw
• Frequency response : 70Hz – 20KHz
• Signal-to-noise ratio : ≥80dB
• Battery type : Lithium-ion polymer (3. N, 3000mAh)
• Battery charge time: 3.5 hour @ 5V1A
• Music playing time: up to 12 hours (varies by volume level and audio
content)
• Bluetooth transmitter power : 0-9dBm
• Bluetooth transmitter frequency rang e: 2.402 – 2.480GHz
• Bluetooth transmitter modulation: GFSK , n/4- DQPSK , 8DPSK
• Dimensions (H x W x D): 68 x 175 x 70 (mm)
• Weight: 515g
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.