Kenmore 721.24195S Canister Vacuum Cleaner Owner’s Manual

DIVISION 20
BASIC FIELD MANUAL FOR
CANISTER VACUUM CLEANER
MODEL 721.24195S

721.24195S Canister Vacuum Cleaner

This Owner’s Manual is provided and hosted by Appliance Factory Parts.Kenmore 721.24195S
Owner’s Manual
Shop genuine replacement parts for Kenmore
721.24195S

Chage Record

No.| Change content| ECO No.| Date| Designer| Confirm
---|---|---|---|---|---
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |

Find Your Kenmore Vacuum Cleaner Parts – Select From 745 Models
——– Manual continues below ——–
AUGUST, 2007
FOREWORD
BEFORE SERVICING THE UNIT, READ THE “SAFETY PRECAUTIONS” IN THIS MANUAL.
MODEL 721.24195S
MECHANICAL SERVICE INFORMATION

SAFETY PRECAUTIONS

BEFORE OPERATING THIS VACUUM CLEANER, READ THIS SERVICE MANUAL THOROUGHLY, AND OBSERVE EACH POINT CAREFULLY.

1. Change the paper bag in case the indicatormoves toward red.

1. If the dust bag is full, intake power will be reduced.
2. When  the dust bag is full of dust, pull out the dust bag from the bag mount.

2. Filter

1. The filter is composed of a clean filter, a exhaust filter and filter bag.
2. Never use the vacuum cleaner without filters. It may harm to the motor.
   NOTE : Re-use of the clean filter.
   • Never wash the filter in a washing machine or in a dishwasher.
   • Never use hot water for washing the filter.
   • Re-use the filter after drying it completely in the shade.
   • Do not dry near fire or direct sun ray.

3. Dust indicator
   Dust indicator shows you red color when the filter is full of dust.
   Then, change the bag with new one.

4. Avoid suction such materials as :

1. Liquid or wet dust :
   Clog the ventilation holes and reduces the intake power significantly and harms the motor.
2. Inflammable liquids such as benzene, alcohol or solvents.
3. Burning objects such as cigarette butts.
4. Bulky objects such as vinyl, paper etc.
5. Sharp objects such as needles, pins, metal or glass particles etc.

5. Attachments
   • Nozzle : for cleaning wooden floor, the room floor and carpet.
   • Brush/Crevice Tool(without brush): for cleaning any crevice, inside corners of window frames.(However, do not use the crevice tool more than 20 minutes.) Brush/Crevice Tool (with brush): for delicate vacuuming of fabrics on the furniture, curtains, etc. • Upholstery Nozzle : for vacuuming the dust on the upholstery.

6. Close supervision is necessary when this vacuum cleaner is used by or near children.
   Children’s carelessness may cause damage to the cleaner or injure persons.

7. Air exhausted from the vacuum cleaner is normally warm. But if extraordinarily hot air is exhausted, check if the extension pipe, hose or dust bag is clogged or not.

8. Electric shock could occur if used outdoors or on wet surfaces.

CAUTIONS

BEFORE ATTEMPTING TO SERVICE OR ADJUST ANY PART OF THE VACUUM CLEANER, DISCONNECT THE ELECTRICAL POWER SUPPLY CORD FROM THE WALL OUT

1. Motor exchange

1. Separate the Body Cover and Body Base by unfastening the screws.
2. Disconnect the lead wires.
3. Lift the old motor and replace it with a new one.

2. In case of exchanging other parts, refer to the exploded view.

DESCRIPTION/SPECIFICATIONS

3.1 MODEL 721.24195S

SPECIFICATIONS

• POWER SOURCE: ON RATING PLATE
• POWER CONTROL: MAIN: SLIDE CONTROL ON HANDLE
• CAPACITY: 2.5 l
• CORD LENGTH: 5.3 m
• HOSE LENGTH: 1.5 m
• NET WEIGHT: 4.7 kg
• PACKING WEIGHT: 9.2 kg
• NET DIMENSION: 296 x 369 x 248 (W x D x H)mm
• PACKING DIMENSION: 330 x 579 x 330(W x D x H)mm
• ATTACHMENTS
  FLEXIBLE HOSE ASSY ……………………………………..1EA
  TELESCOPIC WAND …………………………………………1EA
  AIR-TURBINE BRUSH NOZZLE ………………………….1EA
  DUSTING/UPHOLSTERY TOOL ………………………….1EA
  CREVICE TOOL ………………………………………………..1EA

DISASSEMBLY

NOTE: Before attempting to service or adjust any part of the vacuum cleaner, disconnect the electrical power supply cord from the wall outlet.

• Almost all the parts of this vacuum cleaner can be assembled with a screw driver and each connecting component easily fits each other. Disassemble one by one referring to the exploded view.
• If possible, don’t disassemble except for the necessary parts. It is not necessary to disassemble the parts that are not detailed in the exploded view.

4.1 Filter Cover Assembly Replacement

1. Grasp body base and open filter cover.

4.2 Indicator Assembly Replacement 4.3 Body Cover Assembly Replacement

1. Open the filter cover and remove the two screws and remove the four screws fastening the body base.
2. Lift body cover in the direction of the arrow.

4.4 P.W.B ASS’Y Replacement.

1. Lift the P.W.B ASS’Y in the direction of the arrow.

4.5 Motor Assembly Replacement

• Lift the motor assembly in direction of the arrow after stripping off the lead wires.

4.6 Cord reel assembly replacement

1. Lift the cord reel assembly from the body base in direction of the arrow.
2. Strip off the lead wires.

4.7 Belt Changing and Brush Cleaning
MODEL 721.24195S

• Disconnect cleaner from electrical outlet. Check and remove hair, string and lint build-up frequently in the AirTubine Brush Nozzle brush and brush support areas. If build-up becomes emcessive, disconnect Air-Tubine Brush Nozzle from Telescopic wand.

TO REMOVE BELT

1. Turn Air-Tubine Brush Nozzle upside down.
2. Unscrew the four Air-Tubine Brush Nozzle cover screws.
3. Turn Air-Tubine Brush Nozzle rear side up and tilt cover forward from back until front snaps free.
4. Carefully insert and lift screwdriver at each brush support to free brush from base.
5. Remove worn belt.
6. Slide brush supports off to check and clean brush support areas. See PARTS LIST for picture of complete brush assembly.

TO REPLACE BELT:

1. Install brush supports onto brush.
2. Install new belt in belt groove on the brush, then over the fan shaft. Be sure belt is between the belt guards.
3. Insert each support into its base slot.
4. Push cover and base together.

TROUBLE SHOOTING

1. SWITCH ON BUT MOTOR DOSE NOT RUN.
2. SWITCH ON, MOTOR DOES NOT RUN BUT BUZZES.
3. SWITCH OFF BUT MOTOR RUNS.
4. WEAK SUCTION POWER
5. VIBRATION NOISES
6. RADIO, TV RECEPTION DISTURBANCE
7. IMPROPER TUBE OR NOZZLE CONNECTION

BLOCK DIAGRAM/SCHEMATIC DIAGRAM/CIRCUIT DIAGRAM

6.1 MODEL 721.24195S
WIRING DIAGRAM SCHEMATIC DIAGRAM

POWER AND CONTROL CIRCUIT BOARD

7.1 MODEL 721.24195S

EXPLODED VIEW/REPLACEMENT PARTS LIST

8.1 MODEL 721.24195S
EXPLODES VIEW
MODEL 721.24195S

|
---|---
|
|

REPLACEMENT PARTS LIST

P/No.: 3828FI9002W

References

• Repair Your Grill: Shop Replacement Parts for 24,880 Models
• Kenmore Vacuum Cleaner Parts - Select From 745 Models

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>