Shenzhen Duomei Industry DMS2I1 US Standard Smart Card Power Switch User Manual
- June 5, 2024
- Shenzhen Duomei Industry
Table of Contents
US standard smart card power switch
User Manual
Overview
Thank you for purchasing our company’s smart products, please check carefully before using them to ensure your safety and keep the instructions in a safe place for necessary Checks when needed.
Product Features
- The product is simple in shape and elegant in appearance.
- The outer shell adopts 750° high resistance fuel and the inner adopts wave soldering Double quality assurance of connection process.
- Automatic connection after power failure recovery, good stability, no disconnection.
Product parameters
| Product name | US standard Zigbee card power switch |
|---|---|
| Product number | DMS2I1 |
| Input voltage | 100-250V AC |
| Input frequency | 50/60Hz |
| Maximum current | 30A |
| Radio frequency | Zigbee 3.0 (2.4G) |
| Wireless standard | IEEE802.15.4 |
| Operating temperature | -20° C45° C |
| Working humidity | 10%-90%RH (no condensation) |
Product size
Installation
Distribution network preparation
a. Remove the card slot
b. Press the reset switch 3 times in quick succession and wait for the light
to flash
c. Wait for the light to go off and then flash
d. Click the reset switch three times again
(Zigbee)
a. After downloading and opening Tuya Smart APP. click Add Device
b. Click on the gateway control on the left and select the Zigbee gateway you
have
c. Enter the password
d. After
confirming that the gateway is connected to the power supply, the light
flashes and clicks Next
e. Wait patiently for the gateway to be added
f. After the gateway is connected, click “The indicator light is flashing
quickly” g. Wait patiently for the
card power switch to be added
h. The US standard plug-in card access switch distribution network is successful
Non-warranty regulations
a. Unauthorized maintenance, misuse, collision, negligence, abuse, liquid
ingress, accident, incorrect use of non-converter accessories; or tearing up
or altering labels or anti-counterfeiting marks;
b. The validity period of the three packs has expired;
c. Damage caused by force majeure;
d. Circumstances that do not meet the performance failures listed in the
“Product Performance Failure Table”;
e.Due to human reasons, the converter and its accessories produce performance
failures listed in the “Product Performance Failure Table”.
| name | Performance failure |
|---|---|
| US standard smart card power switch | 1. The product cannot be turned on after |
power on
2. The status indicator is invalid
3. Unable to configure the network
4. Other hardware failures cause the function to be unavailable
Note: The illustrations of products, accessories, user interface, etc. in
the manual are all schematic diagrams and are for reference only.
Due to product updates and upgrades, the actual product shown on the product
may be slightly different from the schematic diagram, please refer to the
actual product
FCC Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator& your body.
Made in China
Documents / Resources
|
Shenzhen Duomei Industry DMS2I1 US Standard Smart Card Power
Switch
[pdf] User Manual
DMS2I1, 2AU9ZDMS2I1, DMS2I1 US Standard Smart Card Power Switch, US Standard
Smart Card Power Switch
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>