Shenzhen Duomei Industry DMS214 Zigbee Smart Switch User Manual
- June 5, 2024
- Shenzhen Duomei Industry
Table of Contents
Shenzhen Duomei Industry DMS214 Zigbee Smart Switch
Description
Thank you for purchasing our smart switch products. Please read this manual
carefully before use to ensure that you can use the product safely, and keep
the
manual properly for reference when necessary. This smart Wall Switch suitable
for all incandescent lamp, energy saving lamp.LED lamp, tungsten lamp,
electronic ballast fluorescent lamp, etc.
Please feel free to contact us if you have any question, we will try our best
to service you.
Specification
- Max Power at 110V
- Capacitive load: 200w/gang
- Resistive load: 400W/gang
- Max Power: at 220V
- Capacitive load: 400w/gang
- Resistive load: 800Wlgang
- Operating System: 10S9,0/Android4,4 or above
- Wireless Type(optional): zigbee
- Voice System Support: amazon alexa, Google Assistant
- Wireless Control Distance: anywhere with 2G/3G/4G/5G network on your phone
- Way to Control: Touch Control, App Remote Control, Voice Control
Wiring
Installation
- Use a small slotted screwdriver to open the face shell as shown in the picture
- Fix the bottom shell to the wall box with screws. (wall box is NOT included)
- Put the face shell to the bottom shell again.
Note: Do not install with electricity
LED indicator on button
- When power the switch, LED indicator will turn red.
- LED indicator will lash when configure network.
- Turn on the switch, LED indicator will turn white. while off, it will change to red.
Pairing preparation
- Turn the 2.4G Wi-Fi router on, please note that 5G WiFi router is not available
- Download the smart life app firstly in 1OS APP store or Google Play, or scan the QR code as below shown.
Alexa and google Home tutorial
Pairing operation of zigbee version
- If you use zigbee switch, you need to add geteway to the smart life app fisrtly.
- Then Long press any button on the sitch panel till LED indicator flash quickly.
- Click “LED already blink” to add switch to app at last.
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
IMPORTANT NOTE
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is
no guarantee that interference will not ocCur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or
more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>