Bischoff Bischoff Via Compact And Foldable Electric Wheelchair Instruction Manual
- June 13, 2024
- Bischoff Bischoff
Table of Contents
Bischoff Bischoff Via Compact And Foldable Electric Wheelchair
Assembly steps
-
Loosen the Velcro strap for attaching the cable to the control unit.
-
Remove the screws under the control panel and
-
Put the control unit to one side.
-
Unscrew the star knob screw.
-
Pull out the holder for the control panel to the front.
-
Push the rubber grip on the edge (red) to the side (escort control can be mounted on the right and left).
-
. Handle rubber displaced.
-
Mount the bracket for the attendant control unit in the straight section of the handlebar.
Note: The height can be adjusted individually by turning.
Note: The position of the clamp lever can be rotated after tightening by pushing it up – choose a position that does not disturb the attendant or the user. -
Mount the control panel on the bracket of the slider control.
Note: Make sure that the cables are not crushed or stretched when folding them up -
Attach the control unit to the back tube using the Velcro cable fastener.
-
Ready mounted.
Note: When folding, watch out for collisions with other components; if necessary, loosen the clamping lever and tighten the twisted operating part.
CUSTOMERS SUPPORT
Bischoff & Bischoff GmbH
Im Stöckmädle 13
D-76307 Karlsbad
www.bischoff-bischoff.com
MOVILIDAD B+B IBERIA S.L.
P.I. Can Mascaró
C/Ponent, Nave 1-A
E-08756 La Palma de Cervelló
www.bbiberia.es
Teléfono: +34 931 600 029
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>