POVISON YD-T9019-1 LED Desk Lamp User Guide
- June 6, 2024
- POVISON
Table of Contents
DESK LAMP
MODEL NO.: YD-T9019-1
User guide
Packing List:
Desk Lamp +Micro-USB charging cable + User Manual
Specification
| Input Voltage | 5V2A |
|---|---|
| Material | Metal + ABS |
| Light Source | 30pcs LED |
| Power Consumption | 7W |
| Luminous Flux | 400lm |
| Ra | 80 |
| Color Temperature | 3500K-4500k-6000K |
| Operating Temperature | -10~ 40 C |
Button Instruction
- Flip the switch: switch it to “ON” for turning on, and “OFF” for turning off.
- Press the button: short press the button to turn on the lamp, then a long gentle press to adjust the color temperature, and 3 colors will be repeated, and short press again to turn off. Long press the button to adjust the brightness when the light is on.
Function guide
Product Care
- Please read the user manual before use.
- The power requirement of this product is USB 5v / 2A, once it exceeds this range, please use the adjustment device, otherwise, it will affect its service life.
- Don’t install the lamps above high-temperature objects or in damp places. (don’t install it above the stove, gas, and exhaust pipe to prevent damage.)
- When the lamp is abnormal, cut off the power supply quickly.
FCC STATEMENT
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Brand: Poison
URL: www.povison.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>