GEORGE KOVACS P5433-697-L Astor By Robin Baron 1 Light Soft Gold LED Wall Sconce Instruction Manual
- June 13, 2024
- GEORGE KOVACS
Table of Contents
GEORGE KOVACS P5433-697-L Astor By Robin Baron 1 Light Soft Gold LED Wall
Sconce
Product Information
Product Name: Item# P5433-697-L
Revision Date: 06/02/2023
Product Usage Instructions
Step 1: Before starting the installation, ensure that the power is shut off at the fuse box or circuit breaker box.
Step 2: If needed, remove the old fixture and its mounting hardware.
Step 3: Carefully unpack the new fixture and lay out all the parts in a clear area, taking care not to lose any small parts required for installation.
Step 4: Mounting the Fixture:
- Secure the mounting plate (A-020-102A) to the outlet box using the provided outlet box screws (#8-32N*L1”L). Ensure that the side of the mounting plate marked “GND” faces outward.
Step 5: Connecting the Wires:
- Refer to Fig. 2 and connect the electrical wires accordingly, ensuring that all wire connectors are securely attached.
- If your outlet has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate (A) using the provided green screw.
- After connecting the wires, carefully tuck them inside the outlet box.
Step 6: Completing the Installation:
- Place the fixture’s back plate (C) over the mounting plate (A) and secure it with the provided screws (D).
- Note: The illustration in Fig. 1 is for installation purposes only and may not be identical to the purchased fixture.
Important: It is recommended to have the fixture installed by a qualified electrician to ensure proper wiring and installation.
The fixture is dimmable with ELV and/or LED compatible wall dimmer switch.
INSTALLATION INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
PREPARATION
- Shut off power at the fuse box or circuit breaker box. If necessary, remove the old fixture and mounting hardware.
- Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
MOUNTING THE FIXTURE (FIG. 1)
- Secure mounting plate (A) to the outlet box (not included) using outlet box screws (B) (Size: #8-32N*L1”L). The side of the mounting plate (A) marked “GND” must face out.
CONNECTING THE WIRES (FIG. 2)
- Connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your outlet has a ground wire ( green or bare copper) , connect the fixture’s ground wire to it. Otherwise, connect the fixture’ s ground wire directly to the mounting plate (A) using the green screw provided. After wires are connected, tuck them carefully inside the outlet box.
COMPLETING THE INSTALLATION ( Fig.1 )
- Place the fixture’s back plate (C) over mounting plate (A)and secure with screws (D) .
Note: Illustration (Fig. 1) on this manual is for installation purpose only. It may or may not be identical to the fixture purchased.
IMPORTANT: Fixture should be installed by a qualified electrician to ensure proper wiring and installation.
Dimmable with ELV and/ or LED compatible wall dimmer switch.
P5433-697-L
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>