Soundcore A3116011 Motion+ Bluetooth Speaker User Guide

June 5, 2024
Soundcore

Soundcore A3116011 Motion+ Bluetooth Speaker

Soundcore-A3116011-Motion-Bluetooth-Speaker-
product

Soundcore

**

**

Important Safety Information

  • Avoid dropping.
  • Do not disassemble.
  • Do not install near any heat sources.
  • Do not place any sources of danger on this device (e.g. liquid filled objects, lit candles).
  • Use original or certified cables.
  • Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
  • Do not expose batteries to high heat such as direct sunlight, fire and etc.
  • Avoid extreme temperatures.

Notice

This product complies with the radio interference requirements of the European Community. Declaration of Conformity   Hereby, Anker Innovations Limited declares that the product type A3116 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.soundcore.com Maximum output power: 8.28dBm Frequency band: 2.4G band (2.4000GHz-2.4835GHz) The following importer is the responsible party (contract for EU and UK matters)  Anker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom Anker Innovations Deutschland GmbH  Georg-Muche-Strasse 3, 80807 Munich, Germany. This product complies with the radio interference requirements of the United Kingdom Declaration of Conformity  Hereby, Anker Innovations Limited declares that the product type A3116 is in compliance with Radio Equipment Regulations 2017. The full text of the UK declaration of conformity is available at the following internet address :https://www.soundcore.com This symbol means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio/TV technician for help.

The following importer is the responsible party Company Name:

  • Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764  Telephone: +1 (800) 988 7973
  • Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirements.
  • The device can be used in portable exposure conditions without restriction.

Trademark

  • The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc, and any use of such marks by Anker Innovations Limited. is under license.
  • Other trademarks and trade names are those of their respective owners. Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
  • Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.

Additional Legal Rights for Consumers

  • For consumers, who are covered by consumer protection laws or regulations in their country of purchase or, if different, their country of residence, the benefits conferred by Soundcore’s Limited Warranty are in addition to all rights and remedies conveyed by such consumer protection laws and regulations, including but not limited to these additional rights.
  • For FAQs and more information, please visit https://www.soundcore.com/ CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

IC NOTICE TO CANADIAN USERS

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.
  3. This Class B digital apparatus complies with Canadian ICES-003 (Cet appareil numérique de la Classe B conforme à la norme NMB-003 du Canada).

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals