hama 00200138 4 Ports USB Hub Instruction Manual

**hama 00200138 4 Ports USB Hub Instruction Manual

**

Package Contents

• USB-A Hub
• USB-C Adapter
• USB-C Power supply unit
• These operating instructions

Safety Notes

• Do not operate the product outside the power limits given in the specifications.
• Do not modify the product in any way. Doing so voids the warranty.
• Keep this product, as all electrical products, out of the reach of children!
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
• The product is intended for indoor use only.
• Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
• Do not use the product in moist environments and avoid splashes.
• Do not use the product in areas where the use of electronic devices is not permitted.
• Do not drop the product and do not expose it to any major shocks.
• Dispose of packaging material immediately according to locally applicable regulations.

Risk of electric shock

• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the AC adapter, adapter cable or power cable is damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
• Ensure that the total power consumption of all connected terminal devices does not exceed 2500 mA.
• Bus-powered operation (without power supply unit) USB 2.0  max. 500 mA / USB 3.0  max. 900 mA / USB-C  3000 mA
• Consult the operating instructions or the technical specifications of the connected devices and your computer.
• It is essential that you observe these specifications and the safety instructions regarding the power supply of your devices.

Startup and Operation

Warning

• Only operate the product from a socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
• Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket.
• If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
• If you will not be using the product for a prolonged period, disconnect it from mains power
• Switch on your computer and boot the system.
• First connect the enclosed power supply unit to a socket and then to the hub. (USB-C power supply unit can alternatively also be used to charge a smartphone / tablet)
• Connect the product to a free USB port on your computer.
• You do not have to install drivers; the computer will automatically recognize the product.
• If necessary, follow the instructions for your operating system.
• In order to use your devices, plug them into the product one after the other

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Technical Data

Specifications in accordance with Regulation (EU) 2019/1782

Manufacturer’s name or trade mark, commercial registration number and address| Hama, HRA12159, Dresdner Str. 9, 86653 Monheim
---|---
Model identifier| 00183242
Input voltage| 100 – 240 V
Input AC frequency| 50 / 60 Hz
Output voltage / Output current/ Output power| 5.0 V DC / 2.4 A/ 12.0 W
Average active efficiency| 79.9 %
Efficiency at low load (10 %)| 76.2 %
No-load power consumption| 0.10 W

Note

• If there is interference or the product no longer responds, unplug the product, wait a few seconds and then plug it in again.

References

• hama.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>