Milesight UC300 Smart IoT Controller User Guide
- June 5, 2024
- Milesight
Table of Contents
Milesight UC300 Smart IoT Controller User Guide
Packing List
Hardware Introduction
LED Patterns
| LED | Device Status | Description |
|---|---|---|
| SYS | System works | Static On |
Reset to factory default: hold the reset button inside the device for more
than 10 seconds| Static On → Quickly Blinks
Fail to acquire data from data interfaces| Slowly Blinks
System error| Static On
ACT| Send join network requests| Blinks as Requests
Succeed to join/register to network| Blinks Twice → Static OnBlinks Twice →
Static On
Succeed to send uplinks| Blinks Once
Succeed to send uplink| Blinks Twice
Receive downlinks| Blinks Twice
SIM Installation (Cellular Version)
Release the screws and cover on the antenna connector, insert the SIM card
into the slot. If you want to take out the SIM card, press it to make it pop
out.
Configuration Guide
Preparation :
- Type-C USB cable
- PC (Windows 10 is recommended)
- ToolBox Software: it can be downloaded from Milesight IoT website.
Steps:
Connect the device to computer via type-C port and open the ToolBox, select
serial port as USB port and type as “General”, then type the password to log
in ToolBox and configure the device. (Default login password: 123456)
Installation
Wall Mounting
-
Fix the wall mounting bracket to the device with 2 screws.
-
Drill 4 holes on the wall according to the wall mounting bracket, then fix the wall plugs into the wall.
-
Fix the device to the wall plugs with screws. When installation, it’s suggested to fix the upper two screws first.
DIN Rail Mounting
-
Fix the mounting clip to the device with 3 screws.
-
Hang the device to the DIN rail. The width of DIN rail should be 35 mm.
Cloud App
Quick Start Guide
All Software & files can be downloaded from
https://www.milesight-iot.com/documents-download/
Better Inside, More in Sight
Milesight IoT Co., Ltd. www.milesight-iot.com