AuerSignal MT60 Signal Tower Installation Guide
- June 16, 2024
- AuerSignal
Table of Contents
Signal Tower MT60
-25°C to +50°C Operating temperature (-22°F to +140°F) IP66
MT60 Signal Tower
WARNING
Device has to be installed or serviced by qualified electrical personnel
only! Disconnect from power source to prevent electrical shock! Check power
supply voltage and frequency before installation!
WARNING
Do not use strobe lights around anyone suffering from cerebral disorders
(epilepsy). Strobe lights may cause seizures to occur.
FOR USE ON A FLAT RIGID SURFACE OF INDICATED TYPE ENCLOSURE
- SCREWS NOT SUPPLIED
MT60-S…
INPUT
M12 Male Connector PIN| Terminal block/Input| MT60-F100-…
MT60-W-…| MT60-M12-24V DC| MT60-M12-S-24V DC
---|---|---|---|---
3| 0| common| common| common
4| 1| green steady| green steady| green steady
1| 2| yellow steady| yellow steady| yellow steady
2| 3| red steady| red steady| red steady
5| 4| red blinking| red blinking| tone pulsing
| 5| tone pulsing
(optional)| –| –
ID#1006537-1.0
Auer Signal GmbH
Perfektastr. 102, 1230 Vienna, Austria
www.auersignal.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>