CALIBER HPG 240BT Portable Wireless Speaker Instruction Manual

CALIBER HPG 240BT Portable Wireless Speaker

SPECIFICATIONS, CONNECTIONS AND BUTTONS

Bluetooth® version:| 5.0 (+BR+EDR+BLE)
supports A2DP, AVRCP, HFP & HSP profile
---|---
Bluetooth® range:
Freq range:
Max e.r.p:| up to 10 meters
2402-2480 Mhz
< 100mW/20dBm
Speaker size:
Speaker power:| 3″
Total power 20W
Built-in connections:| – Micro SD card reader {max 64GB)
– Standard USB-A connection {reader · max 64GB)
– Aux-in 3.5mm jack connection
Power supply:| Built-in rechargeable lithium battery
Battery IS00mAh {up to 16 hours playtime)
Recharge power:
Charge time| Charge via Micro-USB 5.0Vdc, 2.IA
3 Hours (   empty => full )
Dimensions:| 287(W) x 112{D) x 127) (H) mm
Package contains| – one HPG 240BT
– printed manual
– 3,5mm Jack-to-Jack audio cable
– charging cable USB > Micro-USB

We are continuously improving/updating our products and product information. It’s therefore possible that there is a slight difference between the description in this manual to the operation of the product.If something is different or not clear; always check our website for the most current version.

1. Speaker
   Speaker and bass reflector inside

2. use port
   Plays MP3/WMA songs from USB stick (64GB max)

3. SD reader
   Plays MP3/WMA songs from Micro SD (64GB max)

4. Easy carrying strap

5. LED indicator
   Shows charging mode and 8/uetooth mode/connection

6. DC input Micro-use
   For charging the built-in battery

7. AUX-in
   Optional wired connection with jack-to-jack cable (cable incl.)

8. Previous track / Volume decrease
   Short press: Previous track
   Long press: Volume decrease

9. OFF/ ON switch
   Press short to turn ON
   Long press to turn OFF
   TWS
   Press and hold in Bluetooth mode (till sound is heard) to pair a second HPG240BT speaker

10. Mode
    Press short to switch between Bluetooth, AUX-IN, Micro SD cart (if available) and USB (if available)

11. Play / Pause
    Play/ pause playback.

12. Next track/ Volume increase
    Short press: Next track
    Long press: Volume increase

MANUAL

Precautions

Points to observe for safe usage
Read this manual carefully before using this device and its components. They contain instructions on how to use this product in a safe and effective manner. Caliber Europe BV cannot be responsible for problems resulting from failure to observe the instructions in this manual.

Turn off the device immediately in case of a problem.
Failure to do so may cause personal injury or damage to the product.
Return it to your authorized Caliber Europe BV dealer for repairing.

Product cleaning.
Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.

Temperature.
Ensure that the ambient temperature is between 0°C and +45°C before turning on the device.

Maintenance.
If you have problems, do not attempt to repair the device yourself. Return it to your Caliber Europe BV dealer for servicing.

Placement.
Place the product on a flat surface. Provide enough space around the product for sufficient ventilation.

Heat.
Do not locate the appliance in the vicinity of a heat surface or in direct sunlight.

Voltage.
Check the main voltage indicated on the adapter/product rating label in accordance to the local electricity supply, if it doesn’t, return the product to the store where you bought it.

Plug.
Remove the plug from the outlet, when the product is unused for a long period of time and during thunderstorms.

Replace battery.
The built-in rechargeable battery is not replaceable. Do not remove or replace the battery, do not throw in the trash or in the fire. Use only supplied charging adapter.

Below the descriptions of the features/options of the HPG 2408T, hereafter called “device” .. The numbers between the “(. .. )” refer to the key or connections on the device. The illustrations can be found in the front of this manual.

Power ON/OFF
Long press the power button (9) to turn ON Short press to turn OFF

Battery charging
The device has a built-in rechargeable battery. The device is provided with a USB power cable. Use a USB adapter and connect the adapter to the DC-in of the device (6). During charging, the indicator LED (5) lights up red and goes out again when the battery is fully charged. Charging time is 2-4 hours with the included adapter.

The device will operate without the charging cable using the internal battery. The battery discharge depends on the use of it. E.G: Heavy, loud, bass music will use more energy to produce than spoken word.

Bluetooth connection

• Turn ON the speaker.

• Use the [MODE] button (10) to select the Bluetooth mode.

  The indicator LED (5) will flash rapidly blue.

• Set your Bluetooth device to ‘Search’ using the devices’ Bluetooth menu.

• Select “HPG240BT_CAL.:’ from the list. If necessary, confirm the pairing with the access key: “0000”.

• When the devices are paired successfully, a sound will be heard and and the LED will flash slowly. You can start playing music on your device. If your device supports AVRCP you can use the buttons on this device to control the playback.

• Long press the [MODE] (10) button to disconnect the Bluetooth connection.

Playing from USB-stick or Micro SD card

• Turn the speaker ON.
• Insert a USB stick into the port (8) or insert a Micro-SD card into the slot (9), the stored music will be played automatically.
• While playing, press[ ] or[ ] (8/12) to select the previous or next song.

Note: If a USB/SD is inserted in Bluetooth or AUX input mode, playback starts automatically. To return to the previous mode, press the [MODE] button.

AUX-IN:
You can connect an external device e.g. MP3 player to the AUX-in (7) of this device using a jack-to-jack (cable included).

• When an external device is connected, The device will switch to Aux-in mode automatically.
• Start playing music on your external device.
  Note: The playback controls on this unit will not function in this mode, and you cannot enter Bluetooth mode using the [Mode] button

TWS

1. Turn on two identical speakers that you want to pair, note that they must have the same BT pairing name. You only need to set up one of the two devices.
2. Long press the [ ] button (9) of one of the speakers, this speaker makes a tone to start pairing and makes 3 tones when successfully paired.
3. Make a Bluetooth connection with your mobile phone to play music through the two paired speakers to create a more powerful stereo sound.
4. When you want to exit TWS mode, long press the [ ] button (9) again.

Note:

• Users need to make TWS connection first, then make Bluetooth connection with the mobile phone.
• Under TWS mode and Bluetooth connected, when user long press the TWS button, both the TWS connection and Bluetooth connection will be disconnected.
• Under the TWS mode, if you connected your mobile phone to the device (you set at beginning) via the provided audio cable, it will start to play AUX via TWS function, under this status, you can not switch to Bluetooth mode by pressing the Mode button.

| Old appliances and/or batteries must not be disposed with garbage!
If the device/battery can not be used anymore, every user is legally obliged to dispose of old appliances and/or batteries separated from the garbage, e.g. at a collection point of his municipality/district.
---|---

Caliber hereby declares that the device HPG 2408T is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU RED and 2011/65/EU RoHS.

| Latest declaration form can be found at: https://calibereurope.com/nlmedia/forms/DeclarationHPG240BT.pdf
---|---

WWW.CALIBEREUROPE.COM
CALIBER EUROPE BV · Kortakker 10 • 4264 AE Veen • The Netherlands

Documents / Resources

| CALIBER HPG 240BT Portable Wireless Speaker [pdf] Instruction Manual
HPG 240BT, Portable Wireless Speaker, HPG 240BT Portable Wireless Speaker
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>