Falcon MNVR 3-8 Dash Cam Live Streaming Instructions
- June 5, 2024
- Falcon
Table of Contents
Falcon MNVR 3-8 Dash Cam Live Streaming
How to disable IR lights for heavy-duty bracket cameras.
*This should be only performed by customers with adequate tools and knowledge and must follow instructions EXACTLY as referenced below. This does void standard 1 year manufacturer warranty & extended warranties if you make a mistake performing this process. Make sure you review the process below to ensure that you completely understand and you are willing to take all risks. Call us before if you need to at 972.600.1320 to ask for further instructions.
Please look at the pictures provided for reference:
- Step 1. Start with a heavy-duty square bracket camera.
- Step 2. Remove 4 screws from the back of the camera.
- Step 3. Remove the front glass cover.
- Step 4. Remove 2 screws on the left and right side of the PCB.
- Step 5. Turn the PCB around so that you can see the 2 white connectors. Step
- 6. Very carefully remove the larger white connector that has the red and black wire attached to it from the white connector attached to the board. Once you have the connector removed then test the camera before you close it back up to make sure that the IR lights are disabled.
Remember if you damage the unit internally the warranty will no longer apply to the camera and you will have to pay in order to replace it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>