AJAX 9NA WallSwitch Wireless Power Relay User Guide
- June 5, 2024
- ajax
Table of Contents
9NA WallSwitch Wireless Power Relay
User Guide
WallSwitch Wireless Power Relay
https://ajax.systems/support/devices/wallswitch
Before using the device, we strongly recommend reviewing the User Manual on
the website.
Product name: Remote-controlled power relay
wall switch is a 110/230V power relay equipped with a power consumption
meter. The device is designed to control appliances that require up to 3 kW of
power.
Operating frequencies| 905-926.5 MHz FHSS (complies with part 15 of the FCC
rules)
---|---
RF Power Density| 0.0063 mW/cm2 (Limit 0.60 mW/cm2)
Radio signal range| Up to 3,200 ft (line-of-sight)
Power supply voltage range| 110 — 230 V AC ± 10% 50/60 Hz
Device energy consumption| Less than 1 W
Overvoltage protection| Yes, min — 184 V, max 253 V
Maximum load current| 13 A
Output power (resistive load 230 V)| Up to 3 kW
Max. temperature protection| Yes, over 149°F
Operating temperature range| From 32° to 147°F
Operating humidity| Up to 75%
Dimensions| 1.54 x 1.3 x 0.70 “
Weight| 1.08 oz
Complete Set:
- wall switch;
- Connecting wires — 2 pcs;
- Quick Start Guide.
FCC Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum distance between 20cm between
the radiator and your body: Use only the supplied antenna.
This equipment has been tested and found to comply with the limits for a Class
S digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Regulatory Compliance
This device contains a license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
To maintain compliance with ISED’s RF Exposure guidelines, this equipment
should be installed and operated with a minimum distance of 20 cm between the
radiator and your body: use only the supplied antenna.
Warranty:
The warranty for Ajax devices is valid for two years after the purchase date.
If the device does not work correctly, you should first contact the support
service—in half of the cases, technical issues can be solved remotely!
The full text of the warranty is available on the website:
ajax.systems/warranty.
User Agreement: ajax.systems/end-user-agreement.
Technical support: support@ajax.systems
Manufacturer: “AS Manufacturing” LLC. Address: 5 Sklyarenka Str., Kyiv,
04073, Ukraine.
www.ajax.systems
The importer’s name, location, and contact details are indicated on the
package. The manufacturing date is indicated on a round sticker at the bottom
of the box.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>