hama P2223185 3-Way Power Strip Instructions

June 5, 2024
Hama

hama P2223185 3-Way Power Strip

hama P2223185 3-Way Power Strip - Copy

Operating instruction

Thank you for choosing a Hama product.

Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference.

Package contents

  • Power strip
  • These operating instructions

Safety instructions

  •  Use the product only for the intended purpose.

  • Do not operate the product outside the power limits specified in the technical data.

  • Protect the product from dirt, moisture and overheating and use it in dry environments only.

  •  Do not use the product in a damp environment and avoid splashing water.

  •  Do not continue to operate the product if it is visibly damaged.

  •  Do not bend or crush the cable.

  •  Do not drop the product and do not expose it to any major shocks.

  •  Always pull directly on the plug when disconnecting the cable, never on the cable itself.

  •  As with all electrical products, this device should be kept out of the reach of children.

  •  Dispose of packaging material immediately in accordance with the locally applicable regulations.

  •  Do not modify the product in any way. Doing so voids the warranty.

  •  The product is intended for private, noncommercial use only

  • The product is intended only for use inside

  • Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.

  • Only use the article under moderate climatic

  • Do not use the product in areas in which electronic products are not

  • Route all cables so that there is no risk of

  • Never connect multiple units of this product in

Risk of electric shock

  • Do not open the device or continue to operate it if it becomes
  • Do not use the product if the
  • AC adapter, the adapter cable or the mains cable are damaged.
  • Do not attempt to service or repair the product yourself. Leave any and all service work to qualified

Warning

  • Only operate the product from a socket that has been approved for the The socket must be installed close to the product and must be easily accessible.
  • Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the
  • If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating
  • If you will not be using the product for a prolonged period, disconnect it from mains

Operation

Warning – Connection of devices

  • Before connecting a device, check whether it can be adequately supplied with the charger’s current
  • Ensure that the total output of all the connected devices does not exceed 18
  • Note the instructions in your device’s operating

Note – Power Delivery

  • Plug & GO: no additional software required, simply plug in and start:
  • Thanks to Power Delivery the voltage and power are adjusted automatically.
  • Be aware that, for efficient and optimised charging, your terminal device must support the PD (Power Delivery)
  • If you have a large number of PD-enabled devices with different firmware updates, it may be that the function is not fully

Unless different instructions have been expressly given in the operating instructions for the devices you are charging, proceed as follows:

  • Connect your device to a USB charging port using a suitable USB
  • Connect the charger to a properly installed and easily accessible mains
  • The charging process is displayed on your
  • Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully
  • Then disconnect the charger from the line connection

Care and maintenance

Note

Disconnect the device from the mains before cleaning and during prolonged periods of non-use

  • Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
  • Ensure that no water is able to enter the product

Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Technical data

Mains connection 250 V ~ / 16 A
Connected load max. 3680 W

Specifications according to Regulation (EU) 2019/1782

Brand name, commercial register

number, address

| Hama, HRA12159,

Dresdner Str. 9,

86653 Monheim, Germany

Model identifier| 00223185 / 00223186
Input voltage| 250 V
Input AC frequency| 50 Hz





Output voltage / output current / power output

| Total: 18,0W USB-A:

4,2V-6,0V/3,0A/12,6W-18,0W

6,0V-9,0V/2,0A/12,0W-18,0W

9,0V-12,0V/1,5A/13,5W-18,0W USB-C (PD):

5,0V/3,0A/15,0W

9,0V/2,0A/18,0W

12,0V/1,5A/18,0W USB-A + USB-C:

2x 5,0V/1,8A/9,0W

Average efficiency

during operation

| 82,4 %
Efficiency at low

load (10%)

| 80,4 %
Power consumption

at zero load

| 0,10 W

Hama GmbH & Co KG **86652 Monheim / Germany**

**Service & Support**

www.hama.com +49 9091 502-0

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals