Soundwings FW1866 26 Inch 2.0 Soundbar User Manual

Soundwings FW1866 26 Inch 2.0 Soundbar

What’s in the Box

1. Main Unit
2. Remote Control
3. User manual
4. AC adapter
5. Optical cable

Product Overview

Front view

1. Speaker
2. LED Indicator
   • Red when the unit is in STANDBY mode.
   • Lights up yellow in AUX mode.
   • Lights up white in OPTICAL mode
   • Lights up Creen in USB mode
3. Remote control sensor
   Receives signal from the remote control.

Side View

1. Button switches the unit between ON and STANDBY modes
2. SOURCE Button Selects the input source.
3. VOL- Button Decreases the volume.
4. VOL+ button increases the volume.

Back View

1. AUX IN Port
2. OPTICAL Port
3. USB Port
4. DC IN Port

Remote Control Operation Range

The remote control sensor on the front unit is sensitive to the remote control’s command5 up to a maximum of 15′ away and within a maximum of a 60 arc.

Remote Control Overview

1. The power button switches the unit between ON and STANDBY modes.
2. The silent button mutes the unit or resumes the sound.
3. VOL – button decreases the volume.
4. VOL+ button Increases the volume.
5. Press OPTICAL button, device will play audio from optical Input.
6.  Bluetooth Connection switches to Bluetooth mode, press and hold to enable Bluetooth pairing if there is an existing connection then disconnect the devices, unit will enter pairing mode.
7. Press AUX button, device will play audio from aux input
8. Press USB button, device will play audio from USB input
9. The previous button skip to previous track in Bluetooth and USB mode.
10. Forward button skip to next track in Bluetooth and USB mode.
11. Press TALK button to select TALK mode.
12. Press MOVIE button to select MOVIE mode
13. ►II button to play/pause music in Bluetooth and USB mode
14. Press MUSIC button to select MUSIC mode

USB

Insert USB to play the audio from USB（USB is the priority mode.) USB supports MP3, WMA, FLAC and WAV audio decoding.

Using the Optical connection

Use an optical cable (included) to connect the TV’s OPTICAL OUT Port to the soundbar’s OPTICAL Port

Using the Aux Connection

Use a 3.5mm to 3.5mm stereo audio cable（not included) to connect the TV headphone port to the sound bar’s AUX-IN port.

Use a 3.5mm to RCA stereo audio cable (Not Included) to connect the audio output Port to the soundbar’s AUX IN port.

Using the Bluetooth Connection

• Turn on the power, press (POWER BUTTON) on the unit or remote control to switch the unit to ON mode with a prompt tone.
• Keep the distance of the soundbar and your mobile phone, PC, tablet or other Bluetooth-enabled devices within l meter. The closer, the better.
• Ensure Bluetooth has enabled on your device and that your device is discoverable.
• Select the Bluetooth mode on the soundbar.
  • Using the remote control, press the Bluetooth button. The indicator light on the soundbar will be fiashing blue.
  • Alternatively, press the source button on the soundbar until the indicator light is flashing blue.
• Select the Bluetooth search function on your device. Your device should discover the soundbar which Is called FW1866
• Select pairing mode:
  • Using the remote control, press and hold the Bluetooth button for 3 seconds until blue indicator light is flashing slowly.
  • Alternatively, press and hold the source button on the sound bar for 3 seconds until the blue indicator light Is flashing slowly.
• Select the Bluetooth search function on your device. Your device should discover the sound bar which is called FW1866
• Select FW1866 your device is paired with the soundbar when the blue indicator light stops flashing and becomes solid.

FCC Statement

• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and(2)this device must accept any interference received, including interference that may cause undesired operation.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant ta Part 15 of the FCC Rules. These limits are designed ta provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more cf the following measure,
  • Reorient or relocate the receiving antenna.
  • increase the separation between the equipment and receiver
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• FCC RF Racfaat1on Exposure Statement caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20an from nearby persons.
• Warning: Changes er modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• shielded cable must be used with this unit to ensure compliance with the Class B FCC limits.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>