Soundwings FW1866 26 Inch 2.0 Channel Soundbar User Manual

Soundwings FW1866 26 Inch 2.0 Channel Soundbar User Manual

What’s in the Box?

Check to make sure you have everything below.

1. Main Unit
2. Remote Control
3. User manual
4. AC adapter
5. Optical connection

Product Overview

(Front view)

1. Speaker

2.  LED Indicator
   • Red when the unit is in STANDBY mode.
   • Lights up yellow in AUX mode.
   • Lights up white in OPTICAL mode
   • Lights up Careen in USB mode

3. Remote Control Sensor
   Receives signal from the remote control.

Side View

1. Button switches the unit between ON and STANDBY modes
2. SOURCE Button Selects the input source.
3. VOL- Button Decreases the volume.
4. VOL+ Button Increases the volume.

Back View

1. AUX IN Port
2. OPTICAL Port
3. USB Port
4. DC IN Port

Remote Control Operation Range

The remote control sensor on the front unit is sensitive to the remote control’s commands up to a maximum of 15′ away and within a maximum of a 60arc.

Remote Control Overview

USB

Insert USB to play the audio from USB（USB is the priority mode.）

Using the Optical connection

Use an optical cable (included) to connect the TV’ s OPTICAL OUT Port to the sound bar’s OPTICAL Port.

Using the Aux Connection

Using the Bluetooth Connection

• Turn on the power, press ( u,) on the unit or remote control to switch the unit to ON mode with a prompt tone.
• Keep the distance of the soundbar and your mobile phone, PC, tablet or other Bluetooth enabled device within 1 meter. The closer, the better.
• Ensure Bluetooth is enabled on your device and that your device is discoverable.
• Select the Bluetooth mode on the soundbar:
  -Using the remote control, press the Bluetooth button. The indicator light on the soundbar will be flashing blue.
  -Alternatively, press the source button on the soundbar until the indicator light is flashing blue.
• Select the Bluetooth search function on your device. Your device should discover the soundbar which is called
• Select pairing mode:
  -Using the remote control, press and hold the Bluetooth button for 3 seconds until blue indicator light is flashing slowly.
  -Alternatively, press and hold the source button on the soundbar for 3 seconds until the blue indicator light is flashing slowly.
• Select the Bluetooth search function on your device. Your device should discover the sound bar which is called
• Select your device is paired with the sound bar when the blue indicator light stops flashing and becomes solid.

FCC Statement:

• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1) this device may not cause harmful interference, and(2 )this device must accept any interference received, including interference that may cause undesired operation.

• Th is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
  radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measure.
  — Reorient or relocate t he receiving antenna.
  — Increase the separation between the equipment and receiver.
  — Connect t he equipment into an out let on a circuit different f rom t hat to which the receiver is connected.
  — Consult the dec1ler or an experienced radio (TV technician for help.

• FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at last 20cm from nearby persons.

• Warning; Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>