Whirlpool AKP 460/IX 60 L A Black, Stainless steel Ovens User Manual
- June 5, 2024
- Whirlpool
Table of Contents
Whirlpool AKP 460/IX 60 L A Black, Stainless steel Ovens
INSTALLATION
After unpacking the oven, be sure that it has not been damaged during transport and that the oven door closes properly. In the event of problems, contact the dealer or your nearest After-sales Service. To avoid any damage, only remove the oven from its polystyrene foam base at the time of installation.
PREPARING THE HOUSING UNIT
- Kitchen units in contact with the oven must be heat resistant (min 90°C).
- Carry out all cabinet cutting work before fitting the oven in the housing and carefully remove all wood chips and sawdust.
- After installation, the bottom of the oven must no longer be accessible.
- For correct appliance operation, do not obstruct the minimum gap between the worktop and the upper edge of the oven.
ELECTRICAL CONNECTION
Be sure the power voltage specified on the appliance dataplate is the same as the mains voltage. The dataplate is on the front edge of the oven (visible when the door is open).
- Power cable replacement (type H05 RR-F 3 x 1.5 mm2
GENERAL RECOMMENDATIONS
Before use:
– Remove cardboard protection pieces, protective film and adhesive labels from
accessories.
– Remove the accessories from the oven and heat it at 200° for about an hour
to eliminate the smell and fumes from the insulating materials and protective
grease.
During use:
– Do not place heavy objects on the door as they could damage it.
– Do not cling to the door or hang anything from the handle.
– Do not cover the inside of the oven with aluminium foil.
– Do not pour water into the inside of a hot oven; this could damage the
enamel coating.
– Do not drag pots or pans across the bottom of the oven as this could damage
the enamel coating.
– Be sure that the electrical cables of other appliances do not touch hot
parts of the oven or become trapped in the door.
– Do not expose the oven to atmospheric agents.
SAFEGUARDING THE ENVIRONMENT
Disposal of packing material
The packing material is 100% recyclable and is marked with the recycle symbol ( ). The various parts of the packing must therefore be disposed of responsibly and in full compliance with local authority regulations governing waste disposal.
Scrapping the product
– This appliance is marked in compliance with European Directive 2002/96/EC,
Waste Electrical and Electronic Equipment (WEEE).
– By ensuring this product is disposed of correctly, you will help avoid
potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product.
– The symbol on the product or on the accompanying documentation indicates
that it should not be treated as domestic waste but must be taken to an
appropriate collection centre for the recycling of electrical and electronic
equipment.
Energy saving
– Only pre-heat the oven if specified in the cooking table or your recipe.
– Use dark lacquered or enamelled baking moulds as they absorb heat far
better.
– Switch the oven off 10/15 minutes before the set cooking time. Food
requiring prolonged cooking will continue to cook even once the oven is
switched off.
DECLARATION OF CONFORMITY
– This oven, which is intended to come into contact with foodstuffs, complies with European Regulation ( ) n. 1935/2004 and has been designed, manufactured and sold in conformity with the safety requirements of the “Low Voltage” directive 2006/95/CE (which replaces 73/23/CEE and subsequent amendments), the protection requirements of “EMC” 2004/108/CE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>