Gude MW 300 E Multi-Tool Instruction Manual
- June 5, 2024
- Gude
Table of Contents
Gude MW 300 E Multi-Tool
Please read the instructions carefully before starting the machine.
DELIVERY RANGE
Starting-up the machine and Operation
Dust extractor
Operation
Technical Data
| Multi-tool | MW 300 E |
|---|---|
| Art. No | 58148 |
| Service connection | 230 V ~ 50 Hz |
| Rated input | 300 W |
| No-load speed | 15000-23000 min-1 |
| Weight | 1,5 kg |
Noise details
Sound pressure level LpA| 83,0 dB(A)
Sound power level LWA| 94,0 dB(A)
Measured according to EN 60745;
__Uncertainty K = 3 dB (A)
Wear ear protectors!
Vibration details
Vibration total values (triaxial vector sum) deter- mined according to EN 60745:
Vibration emission value ah| 4,75 m/s²
Uncertainty K = 1,5 m/s2
WARNING:
The vibration emission level will vary because of the ways in which a power tool can be used and may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.
Identify additional safety measures to protect the operator from the effects of
vibration such as: maintain the tool and the accessories, keep the hands warm,
organisation of work patterns.
Read and understand the operating instructions before using the appliance.
Familiarise with the control elements and how to use the appliance properly.
Abide by all the safety measures stated in the service manual. Act responsibly
toward third parties.
The operator is responsible for accidents or risks to third parties.
Persons over 16 years of age can only work on the appliance. An exception
includes youngsters trained in order to reach knowledge under supervision of
the trainer during occupational education. In case of any doubts about
connection and operati- on refer please to our customer center
Specified Conditions Of Use
The multi-purpose tool is used for sawing and se- parating wood, plastic, gypsum, non-ferrous metals and fasteners (i.e. non-hardened nails, staples). It is just as well suited for work on soft wall tiles, as well as dry sanding and scraping of small surfaces. It is particularly well suited for working near edges and for precise work. Only Güde accessories may be used with the electric tool.
Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.
Emergency procedure
Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. If you seek help, state the following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury type(s)
WARNING Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
Safety Warnings Multi-tool
- Wear ear protectors. Exposure to noise can cause hearing loss.
- Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a „live“ wire may make exposed metal parts of the power tool „live“ and could give the operator an electric shock.
- Use protective equipment. Always wear safety glasses when working with the machine. The use of protec-tive clothing is recommended, such as dust mask, protective gloves, sturdy non-slip footwear and ear defenders.
- The dust produced when using this tool may be harmful to health. Do not inhale the dust. Use a dust absorption system and wear a suitable dust protec-tion mask. Remove deposited dust thoroughly, e.g. with a vacuum cleaner.
- Do not machine any materials that present a danger to health (e.g. asbestos).
- This machine is suitable only for dry sanding.
- Do not reach into the machine while it is running.
- Chips and splinters must not be removed while the machine is running.
- Always use the protective shields on the machine. Do not use cracked or distorted saw blades.
- Plunge cuts without pre-drilling a hole are possible with soft materials (wood, light building materials for walls).
- When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes.
- Clamp your workpiece with a clamping device. Unclamped workpieces can cause severe injury and damage.
- Always keep the connection cable from the working area of the device. Always guide the cable backwards, away from the device!
Mains Connection
- Operation is only allowed with a safety switch against stray current (RCD max. stray current of 30mA).
- Connect only to single-phase AC system voltage as indicated on the rating plate. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II.
- Only plug-in when machine is switched off.
- Do not let any metal parts reach the airing slots – danger of short circuit!
Maintenance
- Unplug the machine before any work on it.
- Repairs and works specified in these Instructions may only be performed by qualified authorised staff.
- Use only original accessories and original spare parts.
- Keep the device, in particular the air vents, clean at all times. Never spray water on the device body!
- Do not clean the plastics with solvents, flammable or toxic fluids. For cleaning, use a damp cloth only.
- Caution! If the power cord of the appliance gets damaged, it must be replaced by the manufacturer or its customer service or a similarly qualified person to avoid danger.
- Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient mainte-nance and care can lead to unforeseen accidents and injuries.
- If necessary, a list of spare parts can be found at www. guede.com
GÜDE GmbH & Co. KG
Birkichstrasse 6
74549 Wolpertshausen Deutschland
Tel.: +49-(0)7904/700-0 Fax.: +49-(0)7904/700-250
eMail: info@guede.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>