ANDERSEN WINDOWS 95434 4000 Series Fullview Easy Install Aluminum Storm Door Instruction Manual

: June 10, 2024
: ANDERSEN WINDOWS

Table of Contents

CHECK TO ENSURE DOOR OPENING AND TRIM ALLOW ENOUGH SPACE FOR A STORM
MEASURE THE DOOR OPENING
CHOOSE THE HANDING THAT WORKS BEST WITH YOUR ENTRYWAY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ANDERSEN WINDOWS 95434 4000 Series Fullview Easy Install Aluminum Storm Door

CHECK TO ENSURE DOOR OPENING AND TRIM ALLOW ENOUGH SPACE FOR A STORM

DOOR

DIMENSION A : Minimum ¾” width flat trim surface required ( Note : 75 Series and Forever® Storm Doors require a minimum of 1″)
DIMENSION B : Minimum of 1″ trim (brickmould) depth required
DIMENSION C : Minimum of 2 ½” door frame (jamb) depth required*

Note: Depending on the depth and location of your entry door handle set, additional clearance may be needed.

MEASURE THE DOOR OPENING

Measure the width of the door opening at the inside face of exterior trim on each side at top, center & bottom:
(see measure points W1, W2 & W3)
RECORD THE SHORTEST WIDTH:___INCHES.

Measure for height from the sill to the underside of the brickmould at the top of the door:
(see measure point H)
RECORD THE HEIGHT:___INCHES.

DETERMINE THE SIZE YOU NEED BASED ON THE DOOR OPENING MEASURMENTS AND THE STORM DOOR MODEL THAT IS SELECTED

STANDARD DOOR SIZE	30″	32″	34″	36″

Andersen 4000 & 3000 Series Storm Doors with 45 Minute Easy Install System (from Step 2)| 29 7/8″
TO
30 3/8″| 31 7/8″
TO
32 3/8″| 33 7/8″
TO
34 3/8″| 35 7/8″
TO
36 3/8″
Andersen 2000 & 400 Series and EMCO Storm Doors (from Step 2)| 29 3/4″
TO
30 3/8″| 31 3/4″
TO
32 3/8″| 33 3/4″
TO
34 3/8″| 35 3/4″
TO
36 3/8″

STANDARD DOOR SIZE HEIGHT RANGES: 80″

All Doors (from Step 2) 80″ TO 80 7/8″

IF YOUR MEASUREMENTS FROM STEP 2 FALL WITHIN THE STANDARD WIDTH & HEIGHT RANGES, RECORD YOUR DOOR SIZE HERE:

If your measurements are outside the standard width or height ranges shown above, you will require a custom size door.

| CUSTOM| CUSTOM XL
---|---|---
Andersen Custom Door Opening WIDTHS:| 27 7/8″ TO 38 3/8″| 27 7/8″ TO 42″
Andersen Custom Door Opening HEIGHTS:| 72″ TO 84 7/8″| 72″ TO 96″
EMCO Custom Door Opening WIDTHS:| CUSTOM
27 3/4″ TO 38 3/8″| CUSTOM X
38 1/2″ TO 42″
EMCO Custom Door Opening HEIGHTS:| 75″ TO 84 7/8″| 79″ TO 91″

CHOOSE THE HANDING THAT WORKS BEST WITH YOUR ENTRYWAY

If you choose an Andersen 4000 or 3000 Series Storm Door with the 45 Minute Easy Install System, handing will need to be specified at the time of purchase.