AVHRIT GR069UK Cordless Car Buffer Polisher Instruction Manual
- June 14, 2024
- AVHRIT
Table of Contents
AVHRIT GR069UK Cordless Car Buffer Polisher
Thank you for purchasing this product. Please read the instructions carefully before use.
Safety Instructions
Warning! Read the full instructions.
Failure to follow the instructions below may result in electrocution, fire or
serious injury.
Working Environment:
- Ensure that the environment is clean and bright
- Do not use tools near explosive substances such as flammable liquids or gases
- Ensure that bystanders, especially children, are kept at a safe distance from deployed equipment.
Electrical
- The plug of the tool must be appropriate to the type of power socket initially suitable.
- Conduct electricity in contact with the ground. Contact with such objects increases the risk of electric shock.
- Do not use tools under conditions that may result in direct contact with water
Personal Safety
- Use common sense carefully when using tools. Do not use this tool if you are exhausted and under the influence of alcohol, drugs, or medications that reduce your concentration
- Take good care of yourself at work. Always take care of your eyes.
Use and Maintenance of Tools
- If the switch does not work properly please stop using the equipment.
- Equipment that cannot be deactivated by the switch poses a risk and requires immediate repair.
- If power tools or accessories are damaged. please repair them
- Keep tools out of reach of children and do not provide them to persons who are not familiar with their operation and instructions
Equipment Use
- Car polishing: waxing, dewaxing, polishing, sanding.
- Home cleaning: floor, marble, wood furniture, metal, tile, etc.
Operation Instructions
- Do not use this product on soft. uneven ground. sloping or slippery and unstable areas
- Before each use. be sure to check each time for loose screws. missing parts.polishing tool installation status.etc.
- Before using the product. please be sure to read the instruction manual carefully to fully understand how to use the product.
- Do not insert batteries when adjusting the equipment.
| Red light is on | Batteries need to be recharged |
|---|---|
| Red and yellow lights are on at the same time | About half of the power |
| Red, yellow, and green lights are on at the same time | The battery is full |
The battery can last for around 40 to 50 minutes.
If red lights up, means the battery is in charge. Charging is ready when the
green one light up. It takes 50-60 minutes to fully charge.
How to Remove batteries
- Press the release button on the battery.
- Remove the battery from the battery dock.
How to Install batteries
- Insert the battery,into the base of the machine.
- and check whether the battery is fixed.
How to install the adhesive disc
- Make sure the switch is off.
- Stick the fluffy side of the adhesive disc to the chassis.
- Make sure the paste is firm.
Waxing polishing
- Apply the wax to the sponge dish.
- Do not apply liquid wax directly to the vehicle.
- Move the equipment at a uniform speed on the surface to work at a matching speed.
- Do not press the equipment.
- Be sure to turn off the equipment before removing it from the surface.
- Corners or grooves that are hard to reach need to be done manually.
Technical parameters
| Polishing | Machine |
|---|---|
| Voltage | DC 12V |
| Chassis Diameter | 145 mm |
| Net Weight (excluding batteries) | 1.08 kg |
Cleaning and Maintenance
- Turn off the device and remove the battery from the battery dock.
- Do not store it in a place with dust and dirt
- Use a twisted wet cloth to clean the equipment shell
- Do not lubricate the inside of the machine.Dust and debris may deposit on the grease.
- Do not store it in a damp place.
- Protect the machine from direct sunlight.storage temperature:5-20° t:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>