Guangzhou Shirui Electronics SI01 Wifi Module User Manual

WiFi Module User Manual
Note: All the pictures in this manual are for reference only, subject to our available products.

◆ Safety Warning

Before using and operating this device, please read thoroughly and comply with the following precautions in order to prevent accidents or inaccurate operations.
★ Placement
DO NOT charge or use the device in dusty or wet conditions, to prevent internal circuit failure. Keep the device away from heat sources such as an electric heater.
Normal operating temperature is 0-40℃, normal operating humidity is 10%-90%RH.
★ Children Safety
The product and accessories may contain some small-part. Please place them beyond the reach of children in avoidance of swallowing danger.
★ Water Precaution
The product is not waterproof, please keep it dry.
★ Maintenance
When the equipment is damaged, please do not disassemble it for repair without permission, please call customer service to report for repair.
Please contact professional service personnel for maintenance services.
DO NOT insert any sharp or pointed object into the device.
Prevent the device from falls and collisions with other objects, which may cause damages.

Installation Procedure

Warning: Please make sure the power cord of the Interactive Flat Panel (IFP) is disconnected before installation.

Note: This Wi-Fi module only works for the IFP by plugging it into the above slot.

Function

After completing the installation, turn on the IFP, and the Wi-Fi module will run automatically.

1. Click “Settings” on the screen, you can see the following interface.
   

2. Click “Wi-Fi”, enter the following WIFI setting interface.

3. Click the icon “ ”, you can turn on/off the wifi function.
   

◆ Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

◆ FCC Caution:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

◆ Non-modification Statement:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

◆ IC Radiation Exposure Statement for Canada

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
   This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
   The device for operation in the band 5150 –5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems

◆ RF & Power for EC

Hereby, Guangzhou Shirui Electronics Co., Ltd. declares that the radio equipment type SI01B is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.maxhub.com.

This symbol, affixed to the product or its packaging, indicates that the product must not be processed with household waste. It must be brought to an electric and electronic waste collection point for recycling and disposal. By the appropriate disposal of this product you also help in preventing potentially negative consequences for the environment and human health. The recycling of materials helps preserve our natural resources. For further information regarding the recycling of this product, please contact your municipality, local waste disposal center or the store where the product was purchased.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>