Gude MW 220 E Multi Tool Multi Sanding Machine Instruction Manual

Gude MW 220 E Multi Tool Multi Sanding Machine

DELIVERY RANGE

Starting-up the machine

Operation

Technical Data

Noise details
Sound pressure level LpA| 85 dB(A)
Sound power level LWA| 96 dB(A)
Measured according to EN 60745; Uncertainty K = 3 dB (A)
Wear ear protectors!
Vibration details

Vibration total values (triaxial vector sum) deter- mined according to EN 60745:

Vibration emission value ah| 3,14 m/s²
Uncertainty K = 1,5 m/s2

WARNING:
The vibration emission level will vary because of the ways in which a power tool can be used and may increase above the level given in this information sheet. The vibration emission level may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when it is running but not actually in use. This may significantly reduce the vibratory load over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintaining the tool and the accessories, keeping the hands warm, and organization of work patterns.
Read and understand the operating instructions before using the appliance. Familiarise yourself with the control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties. The operator is responsible for accidents or risks to third parties. Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under the supervision of the trainer during occupational education. In case of any doubts about connection and operation refer please to our customer center

Specified Conditions Of Use

The multi-purpose tool is used for sawing and separating wood, plastic, gypsum, non-ferrous metals and fasteners (i.e. non-hardened nails, staples). It is just as well suited for work on soft wall tiles, as well as dry sanding and scraping of small surfaces. It is particularly well suited for working near edges and for precise work. Only Güde accessories may be used with the electric tool.
Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.

Emergency procedure

Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. If you seek help, state the following pieces of information: 1. Accident site, 2. Accident type, 3. Number of injured persons, 4. Injury type(s)

WARNING
Read all safety warnings and all instructions.  Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.

Safety Warnings Multi-tool

• Wear ear protectors. Exposure to noise can cause hearing loss.
• Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a „live“ wire may make exposed metal parts of the power tool „live“ and could give the operator an electric shock.
• Use protective equipment. Always wear safety glasses when working with the machine. The use of protective clothing is recommended, such as dust mask, protective gloves, sturdy non-slip footwear and ear defenders.
• The dust produced when using this tool may be harmful to health. Do not inhale the dust. Use a dust absorption system and wear a suitable dust protection mask. Remove deposited dust thoroughly, e.g. with a vacuum cleaner.
• Do not machine any materials that present a danger to health (e.g. asbestos).
• This machine is suitable only for dry sanding.
• Do not reach into the machine while it is running.
• Chips and splinters must not be removed while the machine is running.
• Always use the protective shields on the machine. Do not use cracked or distorted saw blades.
• Plunge cuts without pre-drilling a hole are possible with soft materials (wood, light building materials for walls).
• When working in walls ceiling, or floor, take care to avoid electric cables and gas or water pipes.
• Clamp your workpiece with a clamping device. Unclamped workpieces can cause severe injury and damage.
• Always keep the connection cable from the working area of the device. Always guide the cable backward, away from the device!

Mains Connection

NOTE:
Operation is only allowed with a safety switch against stray current (RCD max. stray current of 30mA).

Connect only to single-phase AC system voltage as indicated on the rating plate. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. Only plug-in when machine is switched off. Do not let any metal parts reach the airing slots – danger of short circuit!

Maintenance

WARNING:
Unplug the machine before any work on it.

• Repairs and works specified in these Instructions may only be performed by qualified authorized staff.
• Use only original accessories and original spare parts.
• Keep the device, in particular the air vents, clean at all times. Never spray water on the device’s body!
• Do not clean the plastics with solvents, flammable or toxic fluids. For cleaning, use a damp cloth only.
• Caution! If the power cord of the appliance gets damaged, it must be replaced by the manufacturer or its customer service or a similarly qualified person to avoid danger.
• Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.
• If necessary, a list of spare parts can be found at www. guede.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>