ANKER 622 Magnetic Battery (Mago) User Manual

622 Magnetic Battery (Mago)
User Manual

At a Glance

Charging Your Phone or Earbuds Using a Charging Cable

Charging the iPhone 12 Series or Later

1. To activate wireless charging, press the power button or place your device on the charger as illustrated below and it will be held in place magnetically.
   

2. The fold-out stand can be unfolded and used as a stand during wireless charging.

Charging Your Device Wirelessly and Recharging Your Portable Charger

Simultaneously

Recharging Your Portable Charger

Note: When your PowerCore exceeds the temperature limit, the battery level indicator will turn off. Let PowerCore cool down before use.

Specifications

• This wireless charger is not compatible with non-MagSafe phone cases, such as Otterbox Defender cases.

• Do not use an adapter with an output of 5V/1A (5W) or less.

• Wireless chargers make charging more convenient than wired chargers but confined by current wireless technology, their charging speed is slower than that of wired chargers.

• High temperatures will reduce charging speed and restrict power, which is something that happens to all wireless chargers. It is recommended that you charge your device in
  environments with temperatures below 25°C / 77°F.

• Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the charging speed will be.

IMPORTANT SAFETY INSTRUCTIONS

When using this product, basic precautions should always be followed, including the following:

1. Store the product in a cool, dry place.
2. Do not store the product in a hot or humid environment.
3. Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
4. The operating temperature should be between 0°C to 40°C / 32°F to 104°F.
5. Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
6. If the product is not used for long periods of time, you should charge and discharge it once every three months.
7. When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause for concern.
8. In normal conditions, the battery performance will decline over several years.
9. Do not dispose of the product in heat or fire.
10. Do not clean the product with harmful chemicals or detergents.
11. Misuse, dropping, or excessive force may cause product damage.
12. When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
13. Be aware that a discharged battery may cause fire or smoke. Tape the terminals to insulate them.

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body.
Product Name: Anker 622 Magnetic Battery (Mago)
Model: A1611
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973

IC Statement
This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.
RSS-Gen Issue 5 March 2019
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is  subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
   Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Exposure Statement:
The equipment complies with the IC Radiation exposure limit set forth for uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).

This product complies with the radio interference requirements of the European Community.

Declaration of Conformity
Hereby, Anker Innovations Limited declares that product type A1611 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of  conformity is available at the following internet address: https://www.anker.com/

This symbol indicates that this product shall not be treated as household waste.
Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A1611 is in compliance with Radio Equipment Regulations 2017 and The Restriction of the Use of Certain  Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address:
https://www.anker.com

This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components.  Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
This device is in compliance with the essential requirements and other relevant provisions of the UKCA. All essential radio test suites have been carried out.
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Ltd
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom

Customer Service

24-month limited warranty*
Lifetime technical support
support@anker.com
support.mea@anker.com (For the Middle East and Africa Only)

Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

| |
---|---|---
@anker_official
@anker_jp| @Anker Deutschland
@Anker Japan
@Anker| @AnkerOfficial
@Anker_JP

References

• Anker | Live Charged. - Anker Australia

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>