ZEBRONICS BT4440RUCF 4.1 Speaker User Manual
- June 5, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS BT4440RUCF 4.1 Speaker User Manual
Dear Customer,
Thank you for purchasing the ZEB-BT4440RUCF 4.1 Speaker. Please read the user
manual carefully before usage & save it for future reference.
Note:
- Avoid the usage of this speaker at the high temperature and high humidity environment.
- Avoid the self-disassembly of the product as it results in the failure of Warranty.
- Please turn off the power and pull out the plug, when the speaker is not in use.
Features
4.1 Channel Speaker
Wireless BT/USB/FM/AUX
LED Display
11.43cm subwoofer
Remote control
Color changing LED
Front firing woofer
Glossy & Matte Finish
Specifications
-
Output power (RMS)
- Subwoofer : 20W
- Satellite : 10W x 4
- Total : 60W
-
Driver size
- Subwoofer :11.43 cm
- Satellite : 7.62 cm x 4
-
Impedance
Subwoofer :40
Satellite :40 -
Frequency response : 20Hz – 20kHz
-
S/N Ratio : 68dB
-
Separation : 45dB
-
File format support (USB) : MP3
-
Line input : 2ch RCA
-
Max. supported memory size (USB) : 32GB
-
FM frequency range : 87 MHz-108 MHz
-
BT name : Zebronics
-
BT version : 5.0
-
Product dimension (W x D x H)
- Subwoofer : 150 x 285 x 265 mm
- Satellite : 95 x 95 x 153 mm
-
Net. weight
- Subwoofer : 3.03 Kg
- Satellite : 512 gx 4
- Total : 5.07 Kg
Package Content
- Subwoofer : 1 unit
- Satellite : 4 units
- Remote : 1 unit
- Input cable : 1 unit
Control Description
- LED DISPLAY
- USB PORT
- VOLUME CONTROL
- INPUT MODE
- PLAY/ PAUSE /SCAN
- PREV/VOLUME- / FM CHANNEL-
- NEXT/ VOLUME+ / FM CHANNEL+
Back Panel
Remote Control
Power: standbyON/OFF
Numeric Pad( 0-9) : To select direct tracks from USB drive and to select
two digits and above, by consecutively pressing
Vol+: To increase the volume
Prev : To select the previous tracks in BT/USB or channels in FM mode
Vol-: To decrease the volume
RPT: To Switch between REP ALL tracks or REP 1 track
Scan : To scan all FM channels available
Mode: Mode Selection (BT/AUX/USB/FM)
EQ: Equalizer
Play/Pause To Play/ Pause for currenttrack
Next:To select the next tracks in BT/USB or channels in FM mode
Mute To Mute/ Unmute for currently playingtrack
Instructions for Use
Button functions:
- Press the “Input” button to change the input mode (BT/ USB/ FM/AUX) of the speaker.
- Short press the “Next/Prey” button to change the Prey/ Next track or channel when in BT/USB mode or FM mode respectively.
- Long press the “Next/Prey” button to increase/decrease the speakervolume.
- Short press the “P/PS” button to Play/Pause the track being played or Mute/Unmute when in BT/USB mode or FM/AUX mode respectively.
- Press and Hold the “P/PS” button to Scan for the available FM channels.
General Instructions
BT Mode:
Power ON the speaker, press “Input” button to switch to BT Mode. Switch ON BT on your phone or tablet and search for nearby BT devices, Search for the BT name “Zebronics” and tap to connect it.
USB Mode:
The speaker automatically switches to USB input mode with the LED display when a USB flash drive is inserted (this mode isn’t selectable on the speaker or remote control unless a USB flash drive is connected).
FM radio:
Switch the speaker to FM mode. In FM mode, use the P/PS button in the subwoofer control panel or remote to scan for the available FM channels. Once the scanning is done, the scanned channels will begin to play.
AUX-IN:
Switch the speaker to AUX mode. The speaker can be connected to an audio device using an RCA to 3.5mm. Connect the one end of the cable to the speaker and the other end to an audio source. The songs from the audio source can be heard through the speaker.
ISO 9001:2015 Certified Company
www.zebronics.com