FLAMA 2386FL Convector Heater Instruction Manual
- June 5, 2024
- FLAMA
Table of Contents
CONVECTOR HEATER
2386FL
Instruction manual
This appliance is appropriate for use only in well-insulated spaces or for occasional use.
ATTENTION – HOT SURFACE – Accessible surface temperatures can be high during appliance operation.
CONVECTOR HEATER
SECURITY INSTRUCTIONS
Read all instructions carefully before using the device for the first time and
keep this manual. Any use that does not comply with the instructions releases
FLAMA from all responsibilities.
Before each use, make sure that the appliance, the socket, and the cable are
in good condition.
The device must be used under the normal conditions of use defined in this
manual.
CAUTION: To avoid the risk of overheating, NEVER COVER the device.
Do not use this heater if it has been dropped;
Do not use the heater if there are visible signs of damage;
Use this heater on a horizontal, stable surface or hang it on the wall, as
applicable.
It is advisable to keep the device out of the reach of children under 3 years
of age unless they are accompanied by an adult.
Do not place the device under a socket.
Do not use this appliance near baths, showers, washbasins, or swimming pools.
WARNING: Do not use this heater in small rooms when they are occupied by
persons unable to leave the room on their own initiative, except under
constant supervision.
WARNING: To reduce the risk of fire, keep textiles, curtains, or other
flammable materials at least 1 m away from the air outlet.
Do not let water penetrate the device.
Do not touch the device with wet hands.
Do not insert any type of object inside the device (eg needles, etc.).
If the power cord is damaged in any way, it must be replaced by the
manufacturer, an authorized Technical Assistance Center, or a qualified
technician, in order to avoid any danger to the user.
To learn more about maintenance and cleaning operations, see the user guide
that comes with the appliance.
Children between 3 and 8 years of age must only be able to switch the
appliance on or off if it has been placed or installed in the normal operating
position and if children are accompanied or have been instructed on how to use
the appliance safely and understand all potential hazards. Children between 3
and 8 years of age must not install, adjust or clean the appliance, or carry
out maintenance at the expense of the user.
ATTENTION: Some components of the appliance can reach very high
temperatures and cause burns. Particular attention should be paid to the
presence of children and vulnerable people.
This appliance can be used by children over 8 years of age and by persons with
reduced physical, sensory or mental capabilities, or without experience or
knowledge, if these persons are properly supervised or if they have received
instructions regarding the safe use of the appliance and if the possible risks
have been assimilated. Children must not use the appliance as a toy.
Cleaning and user maintenance must not be carried out by children without
supervision.
This heater is filled with a precise amount of special oil. Repairs that
require opening the oil container should only be done by the manufacturer or
its service agent, who should be contacted in the event of an oil leak.
The regulations regarding oil disposal must be followed when disassembling the
device.
This product complies with the Electromagnetic Compatibility and Low Voltage
Directives.
This instruction manual is also available in PDF format at
www.flama.pt.
RECOMMENDATIONS
The electrical installation of the part, the installation of the device, and
its use must comply with the regulations in force in your country.
Do not use the device near flammable objects and products, and, in general,
respect the minimum distance of 50 cm between the device and other objects
(walls, curtains, mists, etc.).
The appliance must be placed so that the electrical plug is accessible.
Do not pull on the power cord or the appliance, even when you want to
disconnect the plug from the socket.
Never use the appliance leaning or lying on its side.
This product is intended for domestic use only. In the event of professional,
inappropriate use or use that does not comply with the instructions, the
manufacturer declines all responsibility and the guarantee will be void.
Fully unwind the cable before each use.
Do not use an extension cord not adapted to the power of the appliance.
Do not switch on the appliance in a dusty place or where there is a risk of
fire.
DESCRIPTION
- grate
- Power & Mode rotary knob
- Thermostat adjustment knob
- Handle
- Feet
OPERATION
The device can be operated using the manual controls located on its side.
ATTENTION – The appliance must never be put into operation without the
feet being properly fitted.
Feet assembly
Carefully remove the convector from the box and bag.
The feet must be placed at the ends of the lower part of the device.
Match the holes in the feet with the axles located in the lower area.
Then screw them in (with the screws provided).
Use
The appliance must be placed on a solid, flat, and stable surface.
Make sure the Power & Mode rotary knob is in the off position (0) before
plugging the appliance into the wall outlet.
Plug the power plug into an electrical outlet. Make sure the plug is securely
in the socket. If not properly seated, it can overheat and damage the outlet.
The cord and plug assembly may become hot during use. It is a normal situation
and does not interfere with the proper functioning of the device.
Set the thermostat adjustment knob to the MAX position.
Turn the Power & Mode rotary knob to the desired temperature mode. Low
temperature (max. 1000W) is represented by ( I ) and high temperature (max.
2000W) by ( II ).
Thermostat Instructions
Note – Make sure the thermostat the adjustment knob is in the MAX position
before switching on the appliance.
Once the compartment has reached the desired temperature, slowly turn the
thermostat adjustment knob counterclockwise until you hear a slight sound.
Then turn the thermostat adjustment knob clockwise until you hear a slight
sound again. The appliance/ thermostat switches on and off to ensure the
desired temperature.
To turn off the device, turn the Power & Mode rotary knob to the off position
(0).
Then remove the plug from the socket.
To adjust the thermostat knob, turn the thermostat adjustment knob clockwise
to increase the desired temperature.
Turn counterclockwise to decrease the temperature.
NOTE: It is normal for the appliance to turn on and off as it maintains a
fixed temperature.
SAFETY FEATURES
The device is equipped with thermal overload protection to prevent
overheating.
The appliance switches off automatically when it reaches an excessive
temperature and will only start again if the user restarts the appliance (see
RESET INSTRUCTIONS)
RESTART INSTRUCTIONS
Unplug the appliance and wait 15 minutes for the appliance to cool down.
After 15 minutes, turn the device back on and operate normally.
TROUBLESHOOTING TIPS
if your appliance unexpectedly shuts down or stops working, this may be due to
activating one of the aforementioned safety features to prevent overheating.
Make sure the power plug is plugged into a working electrical outlet.
Make sure the power plug is plugged into a working electrical outlet.
CLEANING AND MAINTENANCE
WARNING – Always disconnect the plug from the power outlet before
carrying out any maintenance and cleaning operations.
IMPORTANT! DO NOT IMMERSE THE APPLIANCE IN WATER!
Clean the grill with the help of the vacuum cleaner and the brush attachment.
This will remove grime and dirt from the inside of the heater.
DO NOT ATTEMPT TO DISASSEMBLE THE APPLIANCE. Clean the outside with a soft
cloth.
DANGER: Do not use gasoline, benzene, thinner, abrasive cleaning fluids, etc.
as these will damage the convector. NEVER USE ALCOHOL OR SOLVENTS.
To store the device, place it together with these instructions in its original
box in a cool, dry place.
ANOMALIES AND REPAIR
In case of malfunction, please take the appliance to an authorized Technical
Assistance Service. Do not attempt to disassemble or repair the appliance, as
this may be dangerous.
PROTECTING THE ENVIRONMENT
This symbol indicates the separate collection of electrical and electronic
equipment.
The main objective of the separate collection of this waste is to reduce the
quantity to be disposed of and promote re-use, recycling, and other forms of
recovery in order to reduce its negative effects on the environment.
When it is no longer in use, this appliance must not be disposed of together
with other unsorted municipal waste.
The user is responsible for delivering it free of charge to the selective
collection facilities available for that purpose.
Pieces of equipment that are no longer in use can also be taken back at points
of sale, by purchasing new pieces of equipment that are equivalent and have
the same functions.
For more detailed information on collection points, please contact your City
Council or a point of sale for this equipment.
INFORMATION REQUIREMENTS
Model identifier(s) 2386FL
Element| Symbol| Value| Unit| Element| Unit
Heating output| Type of heating output, only for electric, accumulation
ambient heaters (choose one option)
Nominal heating output| Pnom| 2,0| kW| Manual thermal load control, with
integrated thermostat
No|
Minimum heating output (indicative)| Pmin| 0,0| kW| Manual thermal output
control, with interior and/or exterior temperature retroaction| No
Maximum continuous heating output| Pmax, c| 2,0| kW| Electronic control of the
thermal load, with inte-nor and/or exterior temperature retroaction| No
Auxiliary electricity consumption| Heating potential with fan| No
At the nominal heating output| elmax| 0| kW| Type of heating output/interior
temperature control (select an option)
At the minimum heating output| elmin| 0| kW| Heating potential in a single
phase, without interior temperature control| No
In standby mode| elSB| N/A| kW| In two or more manual phases, without.
interior temperature control| No
| | | | With interior temperature control by a mechanical thermostat| Yes
| | | | With electronic interior temperature control| No
| | | | With electronic interior temperature control and daily timer| No
| | | | With electronic interior temperature control and weekly timer| No
| | | | Other control options (multiple selections possible)
| | | | Interior temperature control, with presence detection| No
| | | | Interior temperature control, with open window detection| No
| | | | With the remote control option| No
| | | | With adaptive startup control| No
| | | | With limited operation time| No
| | | | With black body sensor| No
Contact information| FLAMA – Fabrica de Lougas e Electrodomesticos, S.A.
Zona Industrial I Apartado 2041 I 3701-906 Cesar I Portugal
This page has been deliberately left blank
Fábrica de Louças e Electrodomésticos, S.A.
Zona Industrial | Apartado 2041
3701-906 Cesar
Portugal
t. +351 256 850 170
f. +351 256 850 179
www.flama.pt
info@flama.pt
I2357.01
References
- Empresa Pequenos e Grandes Eletrodomésticos | Flama
- Empresa Pequenos e Grandes Eletrodomésticos | Flama