IROAD X11 2 Channel QHD Dash Camera User Guide

IROAD X11 2 Channel QHD Dash Camera

PRECAUTION

• Do not disassemble or modify the product.
  Or else, it will be deemed as the user’s fault and warranty will be voided.

• Do not connect to the device while driving{Viewing live recording etc), as it may causes serious accident

• Do not remove SD card / power cable during firmware update.
  As it may cause device to malfunction or loss of data.

• Using of genuine IROAD memory card on our device is recommended.
  Failing to do so may cause system error or malfunctioning on the device.

• Real-time recording and playback via Wi-Fi might be delayed depending on the specification of the user’s smart device. (Wi-Fi signal connection etc)

• Motion detection is initiated by the image sensor software.
  Motion detection may or may not be activated, as it will be depending on the surrounding environment and the voltage of the car.

• If the GPS signal strength is good, ADAS functions will be activated when the speed of the car is above the set speed. ADAS functions may not be fully activated due to the surrounding environment

• Unauthorized installation of the uninterrupted fuse cable may cause malfunctioning on the device. Different types of vehicle will have different kind of installation ways. (Please contact professional engineer if you required any help regarding installation.)

WARRANTY

• CORVIT assures the quality of the product purchased.
• Warranty number is registered by CORVIT, Sharing of warranty card is strictly prohibited.
• After-sales Services will not be provided if the warranty card and proof of purchase is lost.
• Dash Camera(Front/Rear): 1 Year
• Memory Card, External GPS, Wifi Dongle: 6 Months
• OBD Scanner: 1 Year
• Cable(for Fuse, Rear, Cigar Power): No Warranty

BUTTON SCENARIO GUIDE

POWER OFF/ ON

POWER OFF

| Pressandholdthebutton( for 3 second s long.| ” Shut do wn the system. ” wilt be signaled, and the device will bepowered off.

POWER ON

| Pressandholdthebutton( for 3 seconds long.| ” Start recording ,” will be signaled, and the device will bepowered on.

Wi-Fi OFF/ ON

” Ding ” sound will signal.

| ” Wi-Fi power is off. ” will besignaled, and Wi-Fi connection will beunavailable.
Wi-Fi ON| Pressthebutton( for I seconds long.

” Ding ” sound will signal.

| “Wi-Fi po wer is on.” will besignaled, and Wi-Fi connection will beavailable .
When ‘OFF’, the consumption power is reduced by0.3w and the device operating time is increased by 10%.

‘Wi-Fi ON/OFF’ func tion allowing Users to turn Wi-Fi power on/off. Do not confuse it with ‘Wi-Fi registration button’

When connecting to a smartphone, you must press ‘Wi-Fi registration Button’

Smartphones that have already been registered previous ly, Users do not have to re-registered even if the Wi-Fi on/off funct ion is used

Default setting-Wi-F i fun ct ion is ON

BUTTON SCENARIO GUIDE

Wi-Fi STAND BY MODE OFF/ ON

shortly.

” Ding-Dong ” sound will signal.

| “Stand-by rmxlefor the registration is released.” will besignaled,

andWi -Ficonnection cannot beinitiated.

Wi -Fi STAND BY MODE ON

| Press the button (                         )

shortly.

” Ding-Dong ” sound will signal.

| ” Stand -by mod e for th e registratio n,” will be signaled,

andWi-Fi connection can beinitiated.

AUDIO RECORDING OFF/ ON

MODE

|

OPERATION

|

OPERATION EXPLANATION

---|---|---

AUDIO RECORDING OFF

| Press the bu tt on (                        )

for 4 seconds lon g.

” Ding-Dong ” sound will signal.

|

” Stop recording the voice.” will besignaled, and will berecorded without audio.

AUDIO RECORDING ON

| Press the button (                         )

for 4 seconds long.

” Ding-Dong ” sound will signal.

|

“Start recording the voice.” will be signaled, and will be recorded with audio.

BUTTON SCENARIO GUIDE

MANUAL RECORDING

MODE

|

OPERATION

|

OPERATION EXPLANATION

---|---|---

MANUAL RECORDING

| Pressthebutton(                           )

shortly.

|

” Manual r eco rdin g.” will be signaled, and start manual recording.

FORMATTING THE MICROSD CARD

MODE

|

OPERATION

|

OPERATION EXPLANATION

---|---|---

FORMATTING THE MICRO SD CARD

|

Pressthebutton( for 7 seconds lon g.

|

” On formatting the memory card,

Please wai t sta rt recording ” will be signaled, Format t hemicroSDcard .

CERTIFICATION
Model: !ROAD Xll
Product: I ROAD DASHCAM
Verification Number: R-R-JWW-IROADXll JAEWONCNC Co., Ltd
Made in Korea
I CORVIT INTERNATIONAL ( SINGAPORE ) www.iroad.sg

SPECIFICATIONS

PACKAGE

Basic Components

USING THE MOBILE APP

Main Screen

• Displays infonnation about the connected product.
• Move to the live view screen.
• Playback the recorded videos.
• Configuration the dashcam settings.

Playback recording for Front/ Rear Camera

• Playback the recorded videos.
• Choose video clip from the list and save it.(Video or Image)

Configuration System
Configuration the dashcam settings. (Once settings changed, the device will be rebooted) .

USING THE PC VIEWER

The following provides brief infonnation about the PC VI EWER screen layout.

1. Front/Rear video playback screen
   EJ Video Controller

2. Speed indicator
   (only when GPS/OBD2 is connected)

3. G-sensor information

4. Recording file list

5. Display the vehicle status
   Transmission/ Brake,Acceleration Turn signal/ RPM/ Engine coolant temp S teering angle (only when 08D2 is connected)

6. map/ Full-screen
   Switch screens (Front/ Rear)

7. Dashcam settings
   Minimize/ Maximize/ close the PC viewer

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>