GUDE GAK 715 TELE Branch cutter Instructions

GUDE GAK 715 TELE Branch cutter

Please read the instructions carefully before starting the machine.

Instructions

To enjoy your new appliance as long as possible, please read carefully the Operating Instructions and the attached safety instructions before using it. Further, we recommend keeping the Operating Instructions to recall the product features in the future. Within the continuous product development, we reserve the right to make technical changes to improve it.
Translation of original operating instructions

ILLUSTRATIVE PICTURES

Repeat tensioning of new chain after approx. 5 cuts. Check chain tensioning regularly during operation

Supply includes

Take the appliance out of the transport package and check it whether there are the following parts: page 4
Please contact your dealer if any parts are missing or are damaged.

Appliance description (pic. 1+2)

Including telescopic pole for comfortable treatment of wood species. Including variable telescopic adjustment of 2.00 – 2.80 m to reach very high. 3 saw head positions with locking.

Picture 1

1. Pole chain saw
2. Saw chain
3. Chain bar
4. Angle locking screw

Picture 2

1. Oil tank cover
2. Oil tank
3. Engine
4. Saw chain cover

Technical specifications

| GAK 715 TELE
---|---
Voltage/frequency:| 230 V~50 Hz
Protection type/class:| IP 20 / II
Engine output:| 710 W (P1)
Bar length:| 240 mm
Cut length:| 180 mm
Cutting speed:| 14,6 m per second
Chain oil tank capacity:| 0.12 l
Telescopic pole length:| 0-800 mm
Feeder cable:| 230 mm
Noise:| Lwa 103 dB(A) *
Assembly dimensions LxWxH:| 2000 x 110 x 16 mm
Weight:| 4,0 kg
Art. No.| 95163

* Noise information
Measured values learnt according to 2000/14/EG (1.60 m height, 1 m distance) ­ measurement tolerance +-3dB

Important basic safety instructions

Please read carefully the following safety regulations and Operating Instructions before working with the appliance. If the appliance is also handed to other persons, provide them with the Operating Instructions. Keep the Operating Instructions!

Package: To prevent the appliance against damage, it is in a package during transport. Packages are raw materials and can therefore be reused or recycled. Please read carefully the Operating Instructions and follow all included instructions. Use these Operating Instructions to familiarise with the appliance, how to use it properly and with the safety instructions. Please keep these instructions for future reference.

• The saw must not be used if the operator is tired or under the influence of alcohol, pharmaceuticals or drugs.
• Appliances not being used must be kept in a dry and locked place, inaccessible to children.
• Keep the tools sharp and clean so that working with them is better and safer. Check regularly the appliance cable and have it replaced by a recognised professional if damaged.
• Check regularly the extension cable and have it replaced if damaged. Approved extension cables with proper marking to be used outdoors only.
• Applicable accident prevention regulations, generally recognised safety-technical rules must be followed.
• Unplug the appliance for any adjusting and servicing.
• All protective and safety equipment must be immediately refitted after finishing any repair or servicing work.
• Any damaged or defective protective equipment must be immediately replaced.
• Any electrical installation, repair and servicing may only be performed by professionals.
• Do not wear any loose clothing and jewels. They could get caught by the rotating chain. Wear a hairnet if you have long hair! Wear a respirator (when working in a dusty environment).
• Do not use the cable to pull the plug out of socket. Protect the cable against excess temperatures, oil and sharp edges.
• Wear heavy protective gloves, safety shoes with safety steel insole and anti-slip sole.
• Do not switch the appliance on if turned over or not in the working position.
• Keep the appliance out of reach of other persons, especially children and pets.
• Work under adequate visibility only.
• If work is interrupted, keep the appliance in a safe place.
• Never use the appliance when raining or in a damp or wet environment.
• All parts of the appliance must be regularly checked for any damage or aging. The appliance must not be used if not in a perfect state.
• Original spare parts to be used for repairs only.
• Before putting the appliance into operation and after any impact, check it for any signs of wear or damage and have any necessary repairs executed.
• Never use spare parts and accessory equipment not specified or recommended by the manufacturer.
• Make sure that other items do not cause short circuit on the appliance contacts.
• Persons who are not able to operate the appliance due to their physical, sensory or mental skills or their lack of experience or knowledge must not use the appliance.
• If the appliance shows any visible damage, it must not be put into operation.
• There may be significant risks as a result of any unauthorised repairs.
• The same regulations apply to accessory parts.

Güde GmbH & Co. KG will not be held liable for any damage caused by the following:

• Damage to the appliance as a result of mechanical influences and overloading.
• Change to the appliance
• Use for purposes other than those specified in the Operating Instructions.
• All safety instructions need to be necessarily followed to prevent any injuries and damage.

A flat and non-slip place of work with sufficient free movement must be provided before working with the pole saw.

• Switch the pole saw off and unplug it when leaving the place of your work.
• Remove any wooden waste and items no longer needed from the place of your work.
• Do not cut near flammable liquids or gases.
• Defective chains must be immediately replaced.
• The pole saw has been designed for cutting wood. Do not use the pole saw for any other purposes. Do not use the saw for cutting items that are not wooden. Extension cables marked for outdoor use to be used only.
• Do not use the pole saw if the pole or saw is damaged, wrongly calibrated or assembled incompletely or not safely or if the starter does not switch the saw on and off.
• The chain must stop after pressing the starter.
• Sawing branches out should be done on a sawhorse.
• Do not use the pole saw in strong wind or thunderstorm.
• Watch out for falling branches. Check the tree to be sawn out. Make a space for falling branches.
• Do not use the pole saw for cutting annual shoots or bushes.
• Do not stand on a ladder or any other unstable equipment when using the pole saw. Use both hands when working with the saw. Apply firm, constant pressure on the chain saw when cutting. Do not use the pole saw for sawing out branches with a diameter exceeding the chain bar.
• Keep other persons out of reach of the cutting end of the pole saw – and in a safe distance from the place of your work (10meter).
• The pole saw is not insulated! Do not use the pole saw near cable, electric or telephone lines. The operator may get exposed to a danger of death as a result of the socalled voltage spike! Keep a minimum distance of 10 metres from all electric lines. Follow applicable local regulations.
• Do not stand directly under the branch to be cut off. Stand always outside the falling branches.

Caution: The saw may only be used in a system with safety switch against stray current (FI) 30mA!

Marking

Product safety:

Prohibitions:

|
---|---

General prohibition (in connection with another icon)

| Do not use the appliance when raining

No pulling / carrying by cable

|

Warning against dangerous backlash!

Warning:

|
---|---
Warning/Caution| Warning against flying items
|
Keep safe distance|

Environment protection:

|
---|---
Read the Operating Instructions!| Wear protective glasses and ear protectors!
|
Wear safety shoes!| Wear protective helmet!
|
Wear protective clothes!| Wear safety gloves!

Package:

|
---|---
Dispose waste professionally so as not harm the environment.| Packing cardboard material may be delivered to collecting centres for recycling.
|
---|---
Any defective and/or disposed electric or electronic devices must be delivered to respective collection centres.|

Package:

|
---|---
Protect against moisture| This side up

Technical specifications:

Warranty

A warranty period of 12 months applies to commercial use and 24 months apply to private use and commences on the day of purchase of the device.

Warranty applies exclusively to failures due to defective material or workmanship. An original sale slip with indication of date of sale must be presented in case of claiming for the warranty rights.

Warranty does not cover unprofessional use such as device overload, violent use, damage caused by third party or foreign materials, failure to comply with operations and assembly manual, and normal wear and tear.

Behaviour in case of emergency

Apply the first aid adequate to the injury and get qualified medical assistance as quickly as possible. Protect the injured person from more accidents and calm him/her down.
For the sake of eventual accident, in accordance with DIN 13164, a workplace has to be fitted with a first-aid kit. It is essential to replace any used material in the first-aid kit immediately after it has been used. If you seek help, state the following pieces of information:

1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)

Use as designated

The electric pole chain saw has been designed for treating trees and wood species for private purposes. The manufacturer cannot be held liable for any damage if provisions of generally applicable regulations and these Operating Instructions are not followed.

Area of use:
Care of wood species with height of up to app. 5-6 m, depending on the body height.

Disposal

The disposal instructions are based on icons placed on the appliance or its package. The description of the meanings can be found in the “Marking” section.

Transport package disposal

The package protects the appliance against damage during transport. Packing materials are usually chosen depending on their environmental friendliness and disposal method and can therefore be recycled. Returning the package to material circulation saves raw materials and reduces waste disposal costs. Parts of packages (e.g. foils, styropor®) can be dangerous to children. Risk of suffocation! Keep parts of packages away from children and dispose them as soon as possible.

Operator requirements

The operator must carefully read the Operating Instructions before using the appliance.

Qualification

No special qualification is necessary for using the appliance apart from detailed instruction by an expert.

Minimum age

The appliance can only be operated by persons over 18 years of age. An exception includes youngsters operating the appliance within their professional education to achieve necessary skills under trainer’s supervision.

Training

Using the appliance only requires appropriate instructions by a professional or reading the Operating Instructions. No special training necessary.

Transport and storage

If the saw is to be stored for more than 30 days, the following steps need to be taken:

1. Drain the oil tank.
2. Remove and clean the chain bar and chain. Clean the chain bar and chain by soaking to kerosene solvent or fine soap water.
3. Dry the chain bar and chain out.
4. Put the chain to a tank filled with oil. This will prevent corrosion.
5. Apply a thin oil layer on the chain bar.
6. Wipe the outer part of the saw body with a soft cloth soaked to fine soap water.
7. Store the chain saw in an elevated and locked place inaccessible to children.
8. Store the chain saw in a dry place in a plastic bag or with a cover on the chain bar.

Names and terms

Chain bar: Metal rail protruding from the saw body: The chain bar supports and guides the chain.
Backlash: There may be a dangerous backlash when the upper quadrant of the chain bar point touches an item while the chain is moving. The chain bar gets suddenly shot up and towards the operator.
Oil lubrication system: Chain bar and chain lubrication system.
Saw chain (chain): Chain loop with cutting teeth that cut wood. The chain is engine-powered. The chain leans against the chain bar.
Chain wheel: Gear wheel driving the chain.
Switch: A device closing or opening the electrical circuit to the saw engine.
Switch fuse: A device eliminating unattended saw starting.
Starter: A device switching the saw on and off. The saw is started by pressing the starter. The saw is switched off by releasing the starter.
Sawing out (pruning): Steps for cutting branches on a living tree.
Bottom cut: Upward guided cut from the bottom side of the tree trunk or branch. Performed in a standard cutting position and with the chain bar point cut.

Safety instructions for the operator

• Do not use the appliance before reading carefully the Operating Instructions.
• Follow all safety instructions included in the Operating Instructions.
• Behave responsibly to other persons.
• Walk, do not run when working.
• Use the right working clothes at all times.

Operation

1. Connect the saw with the extension cable. Plug the extension cable.

2. Use both hands to hold the saw. When operating the chain saw ( pic. 10 ), use only the specified points of gripping. Hold the saw properly. Thumbs and fingers must embrace the chain saw handle and pole.
   

3. Make sure your legs are positioned properly. Distribute your weight evenly to both legs.

4. To start the appliance, press the stop first and then On/Off. By this, the chain saw will be started. The chain saw gets switched off by releasing On/Off. Make sure the saw runs at full speed before performing first cut.
   CAUTION: To support the saw, use the stop surface on the cutting head at all times!
   After starting the cut, guide the rotating chain to the wood. Keep the chain saw firmly in hands to prevent any rejection or slip (lateral movement) of the saw.

5. Guide the chain saw with slight pressure. Do not overload the chain saw. Otherwise, the engine may get overloaded and burn down. The saw works better and safer at the specified speed.

6. Move away from the cut with the chain saw when still running at full speed. Switch the chain saw off by pressing the starter. The chain saw must be stopped to the full extent before being put away.

CAUTION:

• Prevent any backlash. A backlash may cause serious injuries.
• Do not use the chain saw when standing on a ladder or any other unstable equipment and when in an unstable position.
• Contact a professional to help you if circumstances require use of bigger appliances.

Servicing and treatment

CAUTION: Follow the chain saw servicing instructions. Servicing works specified in the instructions must be performed by an authorised service centre.
CAUTION: Unplug the chain saw before any servicing. Electric shock or contact with the rotating chain could cause serious injuries. The cutting edges are sharp.
Wear protective gloves when handling the chain.

Saw body cleaning

Keep the saw body clean. Use a soft cloth soaked in fine soap water. Use the soft cloth to wipe the saw body. Do not plunge the saw to liquids. Do not use cleaners containing ammonia,  chlorine or emery. Do not use clearing baths containingchlorine, carbon tetrachloride or petrol.

Oil tank filling

• Remove the oil tank cover (pic. 2/1).
• Add biodegradable oil for chains to the oil tank (pic. 2/2).
• Refit the oil tank cover (pic. 2/1). Tighten the oil tank cover (pic. 2/1). This will prevent oil from leaking from the tank.
• Wipe any excess oil. Drain the oil tank (pic. (2/2) after each use to prevent it from overflowing.

Chain bar treatment

Uneven wear is the cause of the most frequent problems with the chain bar. An unauthorised treatment of cutting elements of the chain and improper depth limiter grinding may amplify that.
If this is the case, replace the chain bar. Check the chain bar before saw sharpening. A worn-out or damaged chain bar is not safe and damages the chain, which is why it must not be used!

Regular chain bar servicing

1. Remove the chain bar off the chain saw.
2. From time to time, remove the wood flour from the chain bar notch. In doing so, use the glazing or wire knife.
3. Oil grooves to be cleaned after the day when used.
4. Remove any inequality on sides of the chain bar. Use a blunt file for flat filing of edges.
5. Do not fit the chain bar if bent or cracked or if the inner rail notch is significantly worn-out.

Do not use clearing baths containing chlorine, carbon tetrachloride or petrol. The chain bar that is to be replaced can be received as a spare part.

Saw chain sharpening

The chain must always be sharp!
Cutting is then faster and safer. A blunt chain causes useless wear of the chain wheel, chain bar, chain and the engine. The chain is blunt if it needs to be pressed to the wood and the cutting results in wood flour and some bigger fractions.

Saw chain changing

Change the chain if the cutting elements are too worn-out after repeated sharpening or if the chain faces a risk of breaking. A spare chain mentioned in these Operating Instructions to be used only. The chain wheel must also be changed when changing the chain. By this, the chain will be driven properly.
Do not use clearing baths containing chlorine, carbon tetrachloride or petrol. The chain and chain wheel can be received as a spare part and accessory equipment.

Service

Any technical questions? Complaint? Do you need spare parts or operation manual?
Go to our website www.guede.com and the section Service will help you quickly and without bureaucracy. Please, help us to help you. In order to identify your device in case of complaint, please indicate serial number, order number and year of manufacture. All information is available on the product label. To have all information always at hand, put them down.

Serial number:
Order number:
Year of manufacture:

Phone:      +49 (0) 79 04 / 700-360
Fax:          +49 (0) 79 04 / 700-51999
E-Mail:support@ts.guede.com

Troubleshooting

CAUTION: Unplug the chain saw before any servicing. Risk of serious injuries or death as  a result of electric shock or contact with the rotating chain.

Saw cutting only at high speed and it only results in a few chippings with some bigger fractions.| Chain is blunt| ****

See Saw chain sharpening

Saw running slowly and remaining slightly jammed| Voltage is too low| Extension lines are not dimensioned sufficiently (see Extension line).
Saw engine not starting after pressing the starter| Switch fuse has not been pressed to release the starter
Extension line connection is released Automatic fuse switch is open Engine brushes are worn out Electrical circuit on the saw is open| Press the switch fuse before the starter Check the cable connection

Check the automatic fuse switch Call an authorised service centre Call an authorised service centre

Saw engine running but not moving| Gear wheel is defective| Call an authorised service centre

Chain not being supplied with oil

| Oil groove on the chain bar is blocked Oil tank empty

Oil is too dense

| Remove the chain bar and clean the oil groove Add oil

Use the right oil (see Oil tank filling)

Chain getting out of the chain bar| Chain is too loose
Chain bar and chain are fitted improperly| Tighten the chain. See Chain tension calibration See Chain bar and saw chain fitting
Saw smoking| Saw is damaged. Do not use the saw| Call an authorised service centre
Oil leaking from the saw| Oil tank cover is not closed| Tighten the oil tank cover. Do not use clearing baths containing chlorine, carbon tetrachloride or petrol. Drain the oil tank if the saw is not being used

EC-DECLARATION OF CONFORMITY
We, hereby declare the conception and construction of the below mentioned appliances correspond – at the type of construction being launched – to appropriate basic safety and hygienic requirements of EC Directives. In case of any change to the appliance not discussed with us the Declaration expires.

GÜDE GmbH & Co. KG
Birkichstrasse 6 74549 Wolpertshausen Deutschland
Tel.: +49-(0)7904/700-0
Fax.: +49-(0)7904/700-250
eMail: info@guede.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>