hama 00200137 7 Ports USB Hub Instruction Manual

hama 00200137 7 Ports USB Hub

Operating instruction

Package Contents

• USB-A Hub
•  USB-C Power supply unit
• USB-C Adapter
• These operating instructions

Safety Notes

•  Do not operate the product outside the power limits given in the specifications.
•  Do not modify the product in any way. Doing so voids the warranty.
•  Keep this product, as all electrical products, out of the reach of children!
•  Use the product for its intended purpose only.
•  Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
•  The product is intended for indoor use only.
•  Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
•  Do not use the product in moist environments and avoid splashes.
•  Do not use the product in areas where the use of electronic devices is not permitted.
•  Do not drop the product and do not expose it to any major shocks.
•  Dispose of packaging material immediately according to locally applicable regulations.

Risk of electric shock

•  Do not open the device or continue to operate it if it becomes damaged.
•  Do not use the product if the AC adapter, adapter cable or power cable is damaged.
•  Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
•  Ensure that the total power consumption of all connected terminal devices does not exceed 2500 mA
•  Bus-powered operation (without power supply unit) USB 2.0 Ž max. 500 mA / USB 3.0 max. 900 mA / USB-C 3000 mA
•  Consult the operating instructions or the technical specifications of the connected devices and your computer.
•  It is essential that you observe these specifications and the safety instructions regarding the power supply of your devices.

Startup and Operation

Warning

•  Only operate the product from a socket that has been approved for the device.
• The socket must be installed close to the product and must be easily accessible.
• Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket.
• If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
•  If you will not be using the product for a prolonged period, disconnect it from mains power.
• Switch on your computer and boot the system.
•  First connect the enclosed power supply unit to a socket and then to the hub.(USB-C power supply unit can alternatively also be used to charge a smartphone / tablet)
• Connect the product to a free USB port on your computer.
• You do not have to install drivers; the computer will automatically recognise the product.
• If necessary, follow the instructions for your operating system.
• In order to use your devices, plug them into the product one after the other.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Technical Data

USB 3.2 Gen1

Speci fi cations in accordance with Regulation (EU) 2019/1782

Manufacturer’s name or trade mark, com- mercial registration number and address| Hama, HRA12159,

Dresdner Str. 9, 86653 Monheim

Model identifier| 00183242, 00201618
Input voltage| 100 – 240 V
Input AC frequency| 50 / 60 Hz
Output voltage / Output current / Output power| ****

5.0 V DC / 2.4 A / 12.0 W

Average active efficiency| 79.9 %
Efficiency at low load (10 %)| 76.2 %
No-load power consumption| 0.10 W

Note
• If there is interference or the product no longer responds, unplug the product, wait a few seconds and then plug it in again.

References

• hama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>