ZEBRONICS Zeb-Bravo 2.1 Speaker User Manual
- June 5, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS Zeb-Bravo 2.1 Speaker
Features
- Channel speaker
- Wireless BT/USB/SD/FM/AUX
- LED Display
- 20.32 cm Subwoofer
- Dual drive satellite
- Remote control
- Volume, Bass & Treble adjustment
- Stylish design
Specification
Output power (RMS)
-
Subwoofer;60 Watts:20
-
Satellite;Watts x 2 :100
-
Total ;Watts
Driver size -
Subwoofer :20.32 cm x 1
-
Satellite :(7.62 cm +7.62) cm x 2
Subwoofer | : 80 |
---|---|
Satellite | : 40 |
Frequency response | : 35Hz-20kHz |
S/N Ratio | : 68dB |
Separation | : 45dB |
File format support | |
(USB/SD) | : MP3/WMA |
Line input | : 2ch RCA |
Max. supported |
Package content
- Subwoofer;1u
- Satellite;2u
- Input cable;1u
- Remote control;1u
- QR Code Guide;1u
Description of the Subwoofer control panel
- LED Display
- Play/Pause
- Previous Track / Previous FM Channel
- Mode
- Next Track/ Next FM Channel
- USB Input
- SD/MMC Port
- Volume / Bass & Treble adjustment
Instructions for Use
Button functions
- Press the “M” button to change the input mode (BT/USB/SD/FM/AUX) of the speaker.
- Press the “Next/Prev” button to change the Prev/Next trackor channel when in BT/USB mode or FM mode respectively.
- Press the “Play/Pause” button to Play/Pause the track being played.
General instructions
BT Mode: Power ON the speaker, press the “Mode” button to switch to BT
Mode. Switch ON BT on your phone or tablet and search for nearby BT devices,
Search for the BT name “ZEB-BRAVO” and tap to connect it.
USB/SD Mode: The speaker automatically switches to USB SD input mode with
the LED display when a USB/SD flash drive is inserted (this mode isn’t
selectable on the speaker or remote control unless a USB/SD flash drive is
connected). Ensure that your USB SD flash drive contains Mp3/ WMA audio files
(other file types not supported).
FM Radio: Switch the speaker to FM mode. In FM mode, use the Play/Pause
button in the subwoofer control panel or remote to scan for the available FM
channels. Once the scanning is done, the scanned channels will begin to play.
The next button or previous button in the subwoofer control panel or remote
can be used to change the FM channels.
AUX-IN: The speaker can be connected to an audio device using an RCA to
3.5mm cable. Connect the one end of the cable to the speaker and the other end
to an audio source. The songs from the audio source can be heard through the
speaker.
Remote Control Description
- STANDBY Turn On / Off the Speaker
- Input: Input mode switching (BT/USB/SD/ FM /AUX)
- USB/SD/FM/AUX Input mode
- TREBLE (-+): To Decrease/Increase treble level
- BASS (-/+): To Decrease / Increase the Bass level
- ST (-): To Previous FM Station
- ST (+): To Next FM Station
- VOL(+) To increase the Volume
- Prev Track: To change the Prev track or channel when in BT/USB mode or FM mode respectively
- VOL() To Decrease the Volume
- Next Track: To change the Next track or channel when in BT/USB mode or FM mode respectively
- PL/PA/MUTE : To Play / Pause track or to Mute the Sound
- FT (-) : FM Tunning Decreases
- FT (+): FM Tunning increases
- 0-9:To choose the track in USB/ SD Mode
- REPEAT FUNCTION ONE Repeat current track ALL: Repeat all track
- SEARCH: FM Station Auto Scan only
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>