Laserliner 082 028 ClimaHome-Check Instruction Manual

: June 5, 2024
: Laserliner

Table of Contents

Laserliner 082 028 ClimaHome-Check
General safety instructions
Safety instructions
Inserting battery
EU directives and disposal
SERVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Laserliner 082 028 ClimaHome-Check

Completely read through the operating instructions, the „Warranty and Additional Information“ booklet as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. This document must be kept in a safe place and passed on together with the device.

Digital hygrometer for long-term room climate monitoring, for example in living rooms, bedrooms, storage, and dining rooms.

General safety instructions

The device must only be used in accordance with its intended purpose and within the scope of the specifications.
The structure of the device must not be modified in any way.
Do not expose the device to mechanical stress, extreme temperatures, or significant vibration.

Safety instructions

Dealing with electromagnetic radiation

The measuring device complies with electromagnetic compatibility regulations and limits values in accordance with EMC-Directive 2014/30/EU.
Local operating restrictions – for example, in hospitals, aircraft, petrol stations, or in the vicinity of people with pacemakers may apply.
Electronic devices can potentially cause hazards or interference or be subject to hazards or interference.

LC display
Toggle measurement in °C / °F
Switch on MAX/MIN values
CLEAR button
Battery compartment
Fold-out stand/clip
Integrated magnetic holder

Room temperature
Measurement in °C / °F
Relative humidity in %rH
Display of MAX values
Display of MIN values

Inserting battery

Open the battery compartment and insert the battery according to the symbols. Be sure to pay attention to polarity.

The device has been optimized for use in fixed measuring locations. Please wait 10 minutes after switching to a measuring location with a significantly different level of humidity.

°C / °F

To set the required temperature unit, press and hold the „°C/°F“ button until the corresponding symbol appears on the display.

MAX / MIN

To determine the maximum or minimum temperature during a measurement, press and hold the „MAX / MIN“ button until either „MAX“ or „MIN“ appear on the display.
The normal measuring mode is set when no function flashes on the display.

CLEAR

By pressing the CLEAR button, the MAX and MIN values are reset.

Information on maintenance and care

Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents. Store the device in a clean and dry place.

Technical data (Subject to technical changes without notice. 09.17)

Ambient temperature

Measurement range / Precision

|

0 °C … 50 °C / ±1 °C

Relative humidity

Measurement range / Precision

| 20%rH … 99%rH / ± 5%rH

(25%rH…85%rH, @152 m above sea level)

EU directives and disposal

This device complies with all necessary standards for the free movement of goods within the EU. This product is an electric device and must be collected separately for disposal according to the European Directive on waste electrical and electronic equipment. Further safety and supplementary notices at: http://laserliner.com/info?an=cliche

Laserliner-082-028-ClimaHome-Check-FIG-3