Qualler WF292444 Gray Upholstered Frame King Size Platform Bed Instruction Manual
- October 30, 2023
- Qualler
Table of Contents
Qualler WF292444 Gray Upholstered Frame King Size Platform Bed
Product Information
The product is a King-size bed with SKU codes WF292444 and WF292445. It comes with a headboard, footboard, two side rails, bed slats, corner blocks, and hardware for assembly. WF292444 has one headboard, while WF292445 has two side rails and four drawers.
Part Lists: WF292444
- Headboard – 1pc
- Headboard right leg – 1pc
- Headboard left leg – 1pc
- Footboard – 1pc
- Footboard leg – 2pcs
- Side rail support leg – 2pcs
- Bed slat 1 – 4pcs
- Bed slat 2 – 6pcs
- Corner block – 16pcs
Part Lists: WF292445
- Headboard – N/A
- Footboard – N/A
- Side rail 1 – 2pcs
- Side rail 2 – 2pcs
- Center support bar – 2pcs
- Center support leg – 4pcs
- Drawer front – 4pcs
- Drawer side left – 4pcs
- Drawer side right – 4pcs
- Drawer back – 4pcs
- Drawer bottom – 4pcs
- Drawer bottom support bar – 4pcs
Hardware Lists: WF292445
- 4mm Allen key – 1pc
- Hex-head bolt – 12pcs
- Hex-head bolt – 8pcs
- Flat washer – 16pcs
- Barrel nut – 16pcs
Product Usage Instructions
- Verify that all parts are complete before assembly.
- Place all wooden furniture parts on a clean and flat soft surface to prevent scratches.
- Follow the instruction manual and hardware and furniture part list for guidance.
- Identify the hardware using the illustrations provided in the manual.
- Start assembling following the figures provided in the manual.
- Do not fully-tighten the nut or nut bolt until all nuts or bolts are ready to be assembled.
- Do not over-tighten the nut or bolt to avoid causing damage to the thread.
- Keep all hardware parts out of reach of children.
Detail View
Part Lists
WF292444
WF292445
HARDWARE LISTS
WF292445
Read this instruction carefully. See the hardware and furniture part list for
guidance. Be sure all parts are complete before you assemble. Place all wooden
furniture parts on a clean and flat soft surface to prevent from being
scratched.
Follow the figure to start assembling.
CAUTIONS :
- Do not FULLY – TIGHTEN the nut or nut bolt until all nut or bolt is ready assembled.
- Do not OVER-TIGHTEN the nut or bolt to avoid causing damage to the thread.
- Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY
ASSEMBLING INSTRUCTION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>