CONCEPT ZN-8110 Steam iron 2200 W SUPER digi IONIC Instruction Manual

: June 5, 2024
: concept

Table of Contents

CONCEPT ZN-8110 Steam iron 2200 W SUPER Digi IONIC
ACKNOWLEDGMENT
IMPORTANT SAFETY PRECAUTIONS
PRODUCT DESCRIPTION
OPERATING INSTRUCTIONS
CLEANING AND MAINTENANCE
ENVIRONMENTAL PROTECTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CONCEPT ZN-8110 Steam iron 2200 W SUPER Digi IONIC

CONCEPT-ZN-8110-Steam-iron-2200-W-SUPER-digi-IONIC-
Product

ACKNOWLEDGMENT

Thank you for purchasing a Concept product. We hope you will be satisfied with our product throughout its service life. Please study the entire Operating Manual carefully before you start using the product. Keep the manual in a safe place for future reference. Make sure other people using the product are familiar with these instructions.

Technical parameters

Model| ZN 8110| ZN 8120
Power input| 1850–2200 W| 2350–2800 W
Voltage| 220–240 ~ 50/60 Hz| 220–240 ~ 50/60 Hz
Ceramic ironing surface| •| •
SELF-CLEAN| •| •
ANTI-DRIP| •| •
ANTI-CALC| •| •
AUTO SHUT-OFF| •| •

IMPORTANT SAFETY PRECAUTIONS

Use the unit only as described in this operating manual.
Remove all the packaging and marketing materials from the unit before the first use.
Make sure the mains voltage corresponds to the values on the rating plate. Use grounded wall outlets only.
The unit reaches high temperatures during operation and remains hot for some time after being turned off. Do not touch the hot surfaces. Use the handles and buttons. There is a risk of being burned.
Do not leave the unit unattended while it is turned on or even only plugged into the wall outlet.
Unplug the unit from the wall outlet when not in use.
When disconnecting the unit from the wall outlet, never pull the power cord. Grasp the plug and disconnect it by pulling.
Do not allow children or unskilled people to handle the unit. Use the unit out of the reach of these individuals.
Person with limited movement capacities, reduced sensory perception, insufficient mental capacity or those who are unaware of the proper handling shall use the product only under the supervision of a responsible, aware person.
Take extra care when using the unit near children.
Don’t let anyone use the unit as a toy.
Use only accessories recommended by the manufacturer.
Never use an appliance with a damaged power cord or plug. Contact an authorized service center immediately to have defective components repaired or replaced.
Keep the vacuum cleaner away from heat sources such as radiators, ovens, and so on. Do not expose the product to direct sunlight or moisture.
Do not touch the unit with wet or damp hands.
The unit is suitable for domestic use only. It is not designed for commercial operation.
Do not immerse the power cord, plug, or appliance into water or any other liquid.
Check the appliance and power cord for damage regularly. Do not switch on a damaged unit.
Turn the unit off, unplug the power cord from the wall outlet, and let the unit cool before cleaning and after use.
Unplug the unit from the power source before filling the water tank.
The filling hole cannot be open during operation.
When connecting and unplugging the unit, set the temperature regulator to the minimum.
The unit must be used and stored on a stable surface.
Make sure the ground on which the stand is placed is stable when putting the unit on the stand.
Do not use the unit if it has been dropped, if there is any visible damage, or if it does not seal.
Do not repair the appliance yourself. Contact an authorized service center.
Prevent any contact of the power cord with hot surfaces.
High temperatures during operation can cause burns.
Make sure the power cord does not overhang the working area, and that children cannot reach it.
Store the unit in a vertical standing position. Let the unit cool down before storing it. Do not touch the hot surfaces.
This appliance may be used by children 8 years of age and older and by persons with physical or mental impairments or by inexperienced persons if they are properly supervised or have been informed about how to use of the product in a safe manner and understand the potential dangers. Children must not play with the appliance. This appliance may be cleaned by children 8 years of age and older if they are properly supervised. Keep this appliance and the power cord out of reach of children younger than 8 years of age.

Failure to follow the manufacturer‘s instructions may lead to refusal of warranty repair.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

PRODUCT DESCRIPTION

Filling hole cover
Steam volume regulator 3 Spray button
Steam button
Temperature controller
Supply cable joint
Heating indicator (ZN8110) 8 Ironing surface
Water tank
Self-clean button
Spray nozzle

Accessories

A Water tank

CONCEPT-ZN-8110-Steam-iron-2200-W-SUPER-digi-IONIC-
fig-1

OPERATING INSTRUCTIONS

Do not leave the unit unattended if it is connected to the power source. Remove all the stickers and packaging from the ironing surface before the first use. Before the first ironing, try the unit on a piece of old fabric to make sure the ironing surface and water tank are perfectly clean. The unit may emit a slight odor during the first use. This smell will vanish after a short time.
Filling with water

Unplug the unit from the power source.
Set the temperature controller to the minimum.
Open the filling hole cover (Fig. 1)and fill the tank with water. Use only distilled or boiled water. Don‘t fill the tank with a liquid other than water. Do not put any additions in the water. There is a risk of damage to the unit. The capacity of the tank is about 350 ml. Do not exceed the maximum marked water level.
Close the filling hole cover.

Spraying

Push the spray button; water is released through the spray nozzle. You will need a sufficient volume of water in the tank to activate this function.

Steam ironing

For steam ironing set the steam volume regulator to the minimum, and the temperature controller according to the material „…“, „…“ or „MAX“
After the heating indicator goes off, set the steam volume regulator to the required position, the steam will start to release, and you may begin ironing.

Steam shock

Turn the temperature controller to the position „…“ or „MAX“, and push the steam button – the ironing surface will emit steam. Wait for a couple of seconds before the next push.
You may use this function for ironing in a vertical position to smoothen folds on hanging clothes or curtains. Hold the unit several centimeters from the fabric to prevent damage to soft materials. Never iron any clothing on the body!

Ironing

If you want to use the spray or steam function, fill the tank with water (see Filling with Water).
Set the temperature controller to the minimum.
Insert the plug into the mains outlet.
Set the temperature controller to the value that corresponds to the material to be ironed (according to the international textile codes). The heating indicator will be illuminated. Note: Iron fabrics that require a lower temperature first, then those at higher temperatures. Most fabrics are marked according to international codes – see the table below.

CONCEPT-ZN-8110-Steam-iron-2200-W-SUPER-digi-IONIC-
fig-3

Wait until the heating indicator stops shining. Only then has the ironing surface reached the right temperature. The ironing surface will be heated during ironing. The heating indicator will turn on and off.
After use, set the temperature controller to the minimum, unplug the unit from the power source, and let it cool down. Then pour the remaining water out of the tank.

Anti-dripping function (ANTI-DRIP)
This unit is equipped with a function that prevents water from dripping, i.e. it will automatically stop steaming if the temperature is too low and water could be dripping from the ironing surface.
Limescale sedimentation preventive function (ANTI-CALC)
This function is based on the filtration of materials from the water used. It softens the used water, which reduces the sedimentation of limescale in the steam chamber.
Self-clean function
This function allows cleaning small sediments from the steam chamber. Use it once every two weeks.

Fill the tank with water (see Filling with Water).
Insert the plug into the main outlet.
Set the temperature control to the maximum.
Wait until the heating indicator light stops shining.
Hold the unit horizontally over a sink or wide water vessel.
Push and hold the Self-clean button. Water will pour from the steam holes in the ironing surface, which will rinse out small sediments from the steam chamber.

Automatic SHUT OFF function – available on model ZN 8009 only
This safety feature allows automatic shut-off if the unit is left on a horizontal ironing surface for 30 seconds without moving, or for 8 minutes in the vertical position without moving. In these cases the unit will shut off automatically and the automatic shut-off indicator will start blinking. (ZN8120) Note: This function is just a safety measure. For normal use, set the temperature controller to the minimum, and unplug the unit from the power source.

STORAGE

Keep the cooling unit in a vertical and stable position in a safe and dry place, out of the reach of children.

CLEANING AND MAINTENANCE

Unplug the unit from the power source. Remnants of fabric fibers may be stuck to the ironing surface. Remove them with a soft cloth soaked in water and vinegar. Then wipe the surface using a dry cloth. Do not use any abrasives or steel wool to clean the ironing surface. Keep the ironing surface smooth; prevent it from coming into contact with hard metal objects. Make sure the ironing surface is not scratched or damaged. Clean the body with a wet cloth. Do not use aggressive substances for cleanings, such as solvents or abrasives! Do not pour vinegar or other limescale removers in the water tank. To clean the steam holes, use a wet cloth, and remove lumps and dust from the internal parts of the holes. Do not immerse the power cord, plug, or appliance into water or any other liquid.

REPAIR & MAINTENANCE

Any extensive maintenance or repair that requires access to the inner parts of the product must be performed by an expert service center.

ENVIRONMENTAL PROTECTION

Packaging materials and obsolete appliances should be recycled.
The transport box may be disposed of as sorted waste.
Polyethylene bags shall be handed over for recycling.

Appliance recycling at the end of its service life:

A symbol on the product or its packaging indicates that this product should not go into household waste. It must be taken to the collection point of an electric and electronic equipment recycling facility. By making sure this product is disposed of properly, you will help prevent the negative effects on the environment and human health that would otherwise result from inappropriate disposal of this product. You can learn more about recycling this product from your local authorities, a household waste disposal service or in the shop where you bought this product.