DENVER SHO-110 Smart Wi-Fi Camera User Manual

: June 5, 2024
: Denver

Table of Contents

Frequently Asked Questions
Operating Frequency
Documents / Resources

Intelligence inside

DENVER SHO-110
Smart Wi-Fi camera
User Manual

Get Ready

Prepare your Wi-Fi network and password.
Make sure your mobile device is running iOS 8 or higher or Android 4.1 or higher.
Make sure a 2.4 GHz Wi-Fi network is used. 5 GHz network is not supported.

Download and install the DENVER SMART HOME app from App Store or Google Play.
Register an account on your DENVER SMART HOME app
|
---|---
STEP1.
Enter your mobile phone number or email address.| STEP 2.
Enter the verification code and create a password.
Power connection
How do I reset my device?
. Use the reset pin to press and hold the Reset Button for several seconds until the camera starts to beep.
. Insert Micro SD card
Add a camera to the app
Option 1: Use QR code

STEP1
In the app, on the top right corner of the
“Add device” screen, tap “Otherwise”.| STEP 2
Choose “QR code”

STEP 3
Enter your Wi-Fi network and password.| STEP 4
Scan the QR Code with the camera.
Add a camera to the app
Option 2: Use smart configuration

Smart Camera is located in the “security & sensor” category of the app.

Frequently Asked Questions

Can I share the camera with family and friends? Yes, you can share your camera with family and friends, so that they can access the camera and control your electrical bulbs, powerful witch, and other devices. In the app, tap the Profile button and tap the “Home Management” button, then you can give or revoke sharing permissions. To make the haring possible for other users, they need to download the app and register a new account.
What’s the wireless range?
The range of the wireless camera is heavily determined by your Wi-Fi router and the conditions of the room. Check your router specifications for exact range data.
The camera appears offline or unreachable?
Make sure your Wi-Fi router is online and in range. Make sure you have the latest app available by tapping “Check for firmware update” in the device settings of the app.
The camera cannot connect to your Wi-Fi network.
Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there is an Internet connection problem. If the Wi-Fi signal is too weak, reset our Wi-Fi router and try again.
How many cameras can I connect?
THE DENVER SMART HOME app can connect an unlimited number of devices in an unlimited number of device locations. A Wi-Fi router may have a limit on the number of devices for connection.

Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S

Electric and electronic equipment contains materials, components, and substances that can be hazardous to your health and the environment if the waste material (discarded electric and electronic equipment) is not handled correctly.
Electric and electronic equipment is marked with the crossed-out trash can symbol, seen above. This symbol signifies that electric and electronic equipment should not be disposed of with other household waste, but should be disposed of separately.
All cities have established collection points, where electric and electronic equipment can either be submitted free of charge at recycling stations and other collection sites or be collected from households. Additional information is available at the technical department of your city.
Hereby, Inter Sales A/S declares that the radio equipment type SHO-110 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.denver- electronics.com and then click the search ICON on the top line of the website. Write model number: SHO-110. Now enter the product page, and the red directive is found under downloads/other downloads.