concept KF1310 Hot Air Brush Instruction Manual

concept KF1310 Hot Air Brush

ACKNOWLEDGEMENT

Thank you for purchasing a Concept product. We hope you will be satisfied with our product throughout its service life. Please study the entire Operating Manual carefully before you start using the product. Keep the manual in a safe place for future reference. Make sure other people using the product are familiar with these instructions.

Technical data

• Voltage 1130
• Power input 220 – 240V
• Acoustic power output leve KF1310 400 W 78 dB

SAFETY WARNING

Attention! Don’t use the product near a bath, washbasin, or other vessels with water. The risk persists, even if you turned the appliance off. That is why you have to disconnect the plug from the socket immediately after use, as well as before cleaning. Never pull out the plug by pulling by the supply cable.

• Don’t apply lacquer, or other aerosol sprays around the appliance when using that.
• Make sure that the hot-air brush cannot come in contact with water and don’t touch it with wet hands. If you lay down the brush during hair conditioning, turn it off.
• The inlet grid heats during operation. Avid any contact with the supply cable.
• Time after time check the supply cable for damaging. If it occurs (that concerns the plug damaging as well), have it repaired in a service centre.
• The inlet and outlet openings should never be blocked. If the free air passage is disabled, the device is automatically tuned off. Within several minutes the appliance cools down and is automatically turned on.
• Pull off the plug from the socket always after use and before cleaning.
• The safety grid in the inlet opening prevents hair to get into the device. If the grid is clogged, clean it, otherwise the passage is blocked and the appliance automatically turns off.
• For further protection we recommend installing the safety current cut-off (RCD) with rated release current not exceeding 30 mA in the circuit feeding the bathroom. Ask an electrician for advice.
• To prevent electrical accident have any repairs made by a skilled person.
• Do not allow children or unskilled people to handle the unit. Use the unit out of the reach of these individuals.
• Person with limited movement capacities, reduced sensory perception, insufficient mental capacity or those who are unaware of the proper handling shall use the product only under the supervision of a responsible, aware person.
• Take extra care when using the unit near children.
• Don’t let anyone use the unit as a toy.

PRODUCT DESCRIPTION

1. Main part
2. Switch
3. Brush releasing pushbutton
4. Movable flex
5. Hanging ring
6. Round brush

Putting the attachment :
Simply insert the attachment with the brush into the basic part.

Removing the attachment :
Simply pull out the attachment from the basic part.

Releasing the brush :
For comfortable use it is not necessary to turn with the brush. Simply push the pushbutton for releasing brush and the brush becomes movable and starts rotation. This way easy kinks forming.

Cleaning :
The hot-air brush may be cleaned with a piece of wet cloth. The brushes can be cleaned with a coarse brush and a piece of dry cloth.

Placing :
The device can be hung on the wall by the suspension ring.

Disposal :
Packaging: Cardboard box – sorted paper waste disposal PE bag – sorted PE waste disposal Polystyrene pads – sorted PS waste disposal

Product:
Plastic materials – sorted disposal of plastic materials Cable without the plug – sorted copper waste disposal Metallic parts, electronics – iron scrap

CLEANING AND MAINTENANCE

WARNING!
Before cleaning the unit, always disconnect the power cord from the wall outlet! Prior to handling, make sure the unit has cooled down! The surface of the unit may only be cleaned using a wet cloth. Do not use any detergents or hard objects, as they may damage the unit’s surface! Never clean the unit under running water, do not rinse it, and do not submerge it in water!

REPAIRS & MAINTENANCE
Any extensive maintenance or repair requiring access to the internal parts of the product shall be performed by an authorized service center.

ENVIRONMENTAL PROTECTION

• Packaging materials and obsolete appliances should be recycled.
• The transport box may be disposed of as sorted waste.
• Polyethylene (PE) bags shall be handed over for recycling.

Recycling at the end of the service life:
A symbol on the product or its packaging indicates that this product should not be disposed of as household waste. It must be taken to the collection point authorized for recycling electric and electronic equipment. By making sure this product is disposed of properly, you will help prevent negative effects on the environment and human health that would otherwise result from inappropriate disposal of this product. You can learn more about recycling this product from your local authorities, a household waste disposal service, or in the shop where you purchased this product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>