KENNETH COLE KCI00206 GEN2 Wellness Watch User Manual

NEW YORK
**USER MANUAL
Model No.: KCI00206
Bluetooth Name: GEN2.0

**

Thank you for choosing this Wellness Watch as your fitness transformation
companion. Allow this manual to guide you through the functioning of your Wellness Watch. Please read this manual thoroughly before using the Wellness Watch for a smooth sail. You may refer to these instructions for later use as well.

The package contains

1 x Wellness Watch
1 x Magnetic Charging Cable
1 x User Manual
Charge Your Wellness Watch
must be charged before initial use. It takes 2-3 hours to be fully charged. Connect and charge the watch according to the adjacent image as a reference, using a 5V/1A adapter. Please note that the positive and negative magnets on the charger need to be aligned correctly with the watch for the charger to connect correctly. A battery icon appears on the screen to indicate your Wellness Watch is charging. Note: Once your Wellness Watch is at 10% battery, it will automatically switch to power saving mode which will disable some functions.

Turning Your Wellness Watch On/Off Power on
Press and hold the button for 3 seconds, the watch will turn on. The watch face is the home screen.
Power off:
Press and hold the button for 3 seconds or choose settings then choose “POWER OFF”. The POWER OFF window pops up as shown below, choose. Wake the screen on by tapping the screen, pressing the button, or wrist raise.

Installing the App

Download the WELLNESS WATCH App on your phone. Available on both the App Store (iOS 8.0 or above) and Google Play Store
(Android 5.0 or above). You can also scan the QR code below to download the App to your phone. Be sure to search and download the App before moving on to the instructions.

https://app.moyoung.com/app-download/WellnessWatch

We strongly suggest creating your personal profile in the App for accurate results. The App will ask for permissions once installed, we highly encourage allowing all notifications and pairing access to your smartphone for complete functionality.

Bluetooth Connection

1. Connect the device directly via the App. Do not connect via your smartphone’s Bluetooth directly.
2. Make sure your Bluetooth is enabled on your smartphone. Select the device icon on the home screen of the App and tap ” ADD A DEVICE” to connect.
3. Find and connect “GEN2.0”.
4. Once App and Wellness Watch are connected, time will be synced as per your smartphone, and data will be synced from Wellness Watch to App.

Note: Synchronize data at least once every day to avoid data loss in the watch. To ensure connectivity throughout your journey, make sure the App is allowed to run in the background of your phone at all times. If you have two or more GEN2.0 at the same time, check SETTINGS 4 ABOUT 4 MAC ADDRESS on the watch when connecting to the App. Make sure that the MAC ADDRESS on the watch you want to connect to is the same as that on the App.
Navigating Through the Functions
Changing the dial interface
Using the App
Select “WATCH FACES” on the App and select your preferred watch face for your Wellness Watch. You can swipe up to find more choices of watch faces. You can also use a photo from your mobile phone as the watch faces by clicking “EDIT”.
Note: Make sure that your watch and WELLNESS WATCH App are connected via Bluetooth. Do not exit the downloading interface until it displays 100% downloaded. It may take up to 2 minutes to sync the watch face with the App.
Changing the watch face directly on the watch Press and hold the home screen to choose watch faces from the available options. Swipe right from the home screen to Split Screen Swipe left from the home screen to access all data
You can access daily activity and sports records: Today (Steps, Sleep, Exercise), Health (Heart rate, HRV, BP, Spot, Temperature, Stress), Weather, Shutter, Music, Meditation. Swipe down from the home screen to Quick Widgets:
Power saving, Timer, Stopwatch, Vibration, Brightness, Notifications, Weather, Date, Day, Battery capacity, and Bluetooth-connected icon. Swipe up from the home screen to the function list
We can change Menu View on Wellness Watch
Choose SETTINGS→ Choose MENU VIEW Choose GRID VIEW or LIST VIEW
Note: When we→choose GRID VIEW, only 12 main functions will be shown.

STEPS
We can view daily Steps, Calories, Distance, 24H Steps, and Last 7 days’ trends. Step data will sync to the App.

SLEEP
The watch will automatically track your Total Sleep time, Light Sleep time, Deep Sleep time, 24H Sleep, Sleep Goal, and Last 7 days’ trend. Sleep data will sync to the App.

HEART RATE

The watch can automatically monitor your real-time heart rate. It will take around 15 seconds to get your heart rate reading and show you real-time heart rate reading all the time until the screen is off. Please make sure the Wellness Watch has direct contact with your skin while measuring. Make sure that your skin under the watch is dry and clean. Heart rate data will sync to the App. HRV
HRV relates to the measurement of the time interval between heartbeats. Unlike measuring heart rate, which relates to an average number of heartbeats per minute, this heart rate variability reading is more focused on the small fluctuations of the heart. HRV is regulated by the autonomic nervous system (ANS), and its sympathetic and parasympathetic branches, and it is commonly accepted as a non-invasive marker of autonomic nervous system activity. Tap on the START icon to measure Heart Rate Variability. We can review the last 7 times HRV data. Please make sure the Wellness Watch has direct contact with your skin while measuring. Make sure that your skin under the watch is dry and clean. Please keep your wrist still during the measuring. HRV data will sync to the App. Note: Measurements for reference only and not for medical purposes as this is not medical grade equipment.
BP
Tap on the screen to measure Blood Pressure. We can review the last 7 times BP data. Please make sure the Wellness Watch has direct contact with your skin while measuring. Make sure that your skin under the watch is dry and clean. Please keep your wrist still during the measuring. BP data will sync to the App. Note:
Measurements for reference only and not for medical purposes as this is not medical-grade equipment.
SPO2:
Blood oxygen saturation (5P02) is a valuable indicator of health and physiological function. By tracking your blood oxygen saturation, you can better understand your body. Tap on the screen to measure Blood Oxygen Saturation. We can review the last 7 times 5PO2 data. Please make sure the Wellness Watch has direct contact with your skin while measuring. Make sure that your skin under the watch is dry and clean. Please keep your wrist still during the measuring. SPO2 data will sync to the App. Note: Measurements for reference only and not for medical purposes as this is not medical grade equipment.

TEMPERATURE

Tap on the screen to measure Body Temperature. Please make sure the Wellness Watch has direct contact with your skin while measuring. Make sure that your skin under the watch is dry and clean. Please keep your wrist still during the measuring. Body Temperature data will sync to the App. Note: Measurements for reference only and not for medical purposes as this is not medical grade equipment.

STRESS

Tap on the screen to measure Stress Level. We can review the last 7 times Stress Level data. Please make sure the Wellness Watch has direct contact with your skin while measuring. Make sure that your skin under the watch is dry and clean. Please keep your wrist still during the measuring. Stress Level data will sync to the App. Note: Measurements for reference only and not for medical purposes as this is not medical grade equipment.
EXERCISE
There are 24 different sports modes in Wellness Watch: Walking, Running, Cycling, Skipping, Badminton, Basketball, Football, Swimming, Mountaineering, Tennis, Rugby, Golf, Yoga, Workout, Dancing, Baseball, Indoor Cycling, Free Training, Rowing, Outdoor Running, Skiing, Bowing, Dumbbell, Sit up.
When we tap the green flag which is on the right side of each sport mode, we can set GOAL. (Time, Calories, and Open) Heart rate will be monitored during exercise. Swipe right during exercise, and it will turn to the Music interface.

WEATHER

Once your Wellness Watch is fully paired to the App, the weather will be shown on your Wellness watch. You can swipe up on the screen to view over 6 days of weather data. To change from Celsius to Fahrenheit, 15
navigate to SETTINGS under the device icon inthe App and find the weather Temp Unit. You also can set the city for which you like to see the weather information. Weather data will be updated every 1 hour.

NOTIFICATION

Enable all notifications on the App to receive notifications on your Wellness Watch. It will show 5 new notifications and automatically overwrite the last notification if there are more than 5.
Note : The watch can be used to reject calls, but cannot be used to answer calls or messages.
SHUTTER
Click on the SHUTTER icon on your Wellness Watch to snap a photo from your phone, just tap the screen or wear the watch and rotate your wrist to snap a photo.
Note: Turn on your App to use this feature.
MUSIC
Click on the MUSIC icon to launch music control mode. Note: Ensure the music App is running on your phone for this feature to work properly. The feature might not work for some of the music Apps with different control protocols.

MEDITATION

Click on MEDITATION on your Wellness Watch. It will take you to have 20 minutes to relax. Heart rate will be monitored during meditation.

SETTINGS

Click on SETTINGS on your Wellness Watch. We can access more functions: STOPWATCH, ALARM, TIMER, MENU VIEW, BRIGHTNESS, VIBRATION, THEATER MODE, RESET, POWER OFF, ABOUT, FIND PHONE, and APP DOWNLOAD QR code. Product Parameters

Maintenance

Regularly clean your wrist and the strap of the Wellness Watch, especially after sweating during exercise or being exposed to substances such as soap or detergent, which may get stuck on the other end of the product. Do not wash the strap with a household cleanser. Please use a gentle soap without detergent, rinse thoroughly and wipe with a soft towel or napkin. For sports or stains that are not easy to remove, scrub the area with rubbing alcohol and then follow the above procedure.

FAQs
Q. Search for the watch in the App to connect keeps failing.

1. Keep the WELLNESS WATCH app updated to the latest version.
2. Close all the programs on the watch. 4 Stop and restart Bluetooth 4 Connect again.
3. Check and enable notification functions of your smartphone and keep the phone and watch in close contact. Note: Make sure your phone system meets iOS 8.0 or above and Android 5.0 or above.

Q. My watch Is receiving no alerts, texts, or phone calls.

1. Make sure notifications are enabled on the app and synced to the watch.

2.  Also, make sure the notification center of your smartphone is displaying messages.
   Only then will your Wellness Watch also display those notifications.

3. You won’t see notifications if you turned on do not disturb mode on the App.

Q. My Bluetooth keeps getting disconnected.

1. Make sure there is no more than 5m distance between Bluetooth on the phone and the Watch.
2. There is no obstacle between the watch and the phone.

Q. Which functions of the Wellness Watch GEN2.0 need Bluetooth to work?
Activity tracker, Sleep Monitor, Alarm Clock, Sports Mode, Call & Text Notifications, Weather, Music control, and Camera control need Bluetooth connectivity to work.
Q. The time displayed on my phone and on the watch are inconsistent.
Make sure your watch is connected to your phone through the app and not your phone’s Bluetooth feature itself.
Q. The calculated number of steps on the app and on the watch is inconsistent.
Ensure that your App and the watch are synchronized.
Q. Will it be okay to take a bath wearing the watch?
The water resistance will only work under the following conditions:

1. Maximum depth of water lm.
2. The maximum time for exposure to water: is 30 minutes

The watch is not suitable for hot baths, hot springs, saunas, snorkeling, diving, water skiing, and other wading or deep-water activities with high- speed water flow.
Q. How to update my watch Firmware?
To check and update your watch with the latest firmware, you need to go to your App Device, you will see UPGRADE and tap on it to update.
Q. What things need to keep in mind?

1. Sync data every day to avoid data loss.
2. Water Resistance will not work for seawater, acidic and alkaline solutions, chemical reagents, and other corrosive liquids. The damage or defects caused by misuse or improper use are not covered by the warranty.
3.  Avoid wearing the watch too tight in daily use. Keep the parts of the skin touching the watch dry.
4. Keep your arm still while measuring data for accurate measurement.

SAFETY & PRODUCT INFORMATION

Battery

• Do not disassemble, bore, or damage the battery
• Do not disassemble the built-in batteries of non-replaceable battery devices.
• Do not use sharp objects to remove the battery.

Health Warning

• If you are wearing a pacemaker or other implanted electronic devices, please consult your doctor before using the heart rate monitor of the watch.
• The optical heart rate sensor will glow green and flash. If you suffer from epilepsy or are sensitive to blinking light sources, please consult your physician before wearing this device.
• The device tracks your daily activities through sensors. This data is intended to tell you about your daily activities such as steps, distance, calories, sleep, and heart rate, but may not be completely accurate.
• The device accessories, heart rate sensor, HRV, blood oxygen monitor, stress level, body temperature sensor, and other relevant data is designed for fitness and not for medical purpose. They are not applicable to the diagnosis, monitoring, treatment, or prevention of any diseases or symptoms. All data are for reference only. We are not responsible for any deviation in data.
• Avoid wearing the watch too tightly. Make sure you keep your skin dry in the area that comes in contact with the watch. If symptoms such as redness or swelling appear on your skin, immediately stop using the watch and consult the doctor.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

** The product must be recycled or disposed of properly. Dispose of as per the requirements of your local municipality.
Made in China**
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>