Millennia HV-32 Single Channel 200 Series Microphone Preamplifier Module User Guide
- June 5, 2024
- Millennia
Table of Contents
Millennia HV-32 Single Channel 200 Series Microphone Preamplifier Module
User Guide
Protecting Against Electrostatic
Discharge – Static electricity can harm delicate components on the HV-32
board.
To prevent static damage, discharge static electricity from your body before
you touch any jumpers or switches with the cover removed. You can do so by
touching an unpainted metal surface on the API rack’s chassis.
Do not install or remove the module until the console or rack’s power is off.
Compatible Racks – The HV-32 is designed to work in an API L200 rack, Vision or Legacy console. If you are using another brand, be sure it meets or exceeds the API spec.
The HV-32 power consumption is: +140mA,–25mA with Phantom Power selected
Signal LEDs indicate signal level at -30dBu (green), +8dBu (yellow) and +18dBu (red).
Gain is a continuously variable gain control. It has a high gain jump near full clockwise for low level signals.
Ribbon-Dyn Mic DC couples the mic to the gain stage and also provides an
additional 10dB of gain. Use with any Ribbon or Dynamic mic (like an SM-57).
A mic requiring phantom power will not work in this mode.
Pad – Attenuates the input signal after the gain stage by 15dB.
Phantom Power –turns the +48V phantom power supply on.
Avoid connecting or disconnecting mics with the +48V on (hot patching). This can damage the mic, preamp and make some very loud pops that can damage your monitoring system and ears.
World Wide Warranty
We will repair our products, free of charge, in the event of defect of materials or workmanship for two (2) years following date of purchase.
This limited warranty covers failures due only to defects in materials and workmanship which occur during normal, intended use and does not cover damage which occurs in shipment or failures which are caused by products not supplied by Millennia Media.
This limited warranty does not cover failures which arise from accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, improper adjustment, alteration or modification of product, incompatibilities, line-power surges, acts of God, or service performed by anyone other than Millennia Media or its authorized agent.
Limits and Exclusions – There are no express warranties except as listed
above. Millennia shall not be liable for special, subsequent, incidental,
consequential, or punitive damages, including, but not limited to: damage to
recordings, broadcasts,
microphones, mixing consoles, or any associated equipment, downtime costs,
loss of goodwill, or claims of any party dealing with purchaser for such
damages resulting from the use of this product. All warranties express and
implied, including the warranties of merchantability and fitness for a
particular purpose are limited to the applicable warranty period set forth
above.
Vacuum tube and bulb failures are not covered under warranty. Shipping costs to/from factory are not covered under this warranty. International warranty law may vary from country to country, and Millennia will abide by the law of each country from which the product was initially sold.
For North American repairs and service, contact Millennia (tech@milmedia.com) to obtain a Return Authorization number. Please include your shipping address, daytime phone number and description of the problem. Outside of North America, please contact your local Millennia Distributor.
Discarding Units
In the event that any Millennia equipment manufactured after July 1, 2006
needs to be discarded, you must return it to Millennia, at our headquarters in
California, USA.
Please contact the distributor in your country or Millennia directly for
instructions. We will make arrangements to have the equipment shipped to us at
no cost to you, and we will dispose of it in a manner that complies with
whatever regulations are in existence at that time.
Support
Millennia Media, SPC
http://www.mil-media.com
6411 Capitol Avenue
Diamond Springs, CA 95619
530-647-0750
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>