Millennia AD-R96 Analog to Digital Converter User Guide
- June 12, 2024
- Millennia
Table of Contents
Millennia AD-R96 Analog to Digital Converter
Protecting Against Electrostatic Discharge
Static electricity can harm delicate components on the AD-R96 board. To prevent static damage, discharge static electricity from your body before you touch any electronic components. You can do so by touching an unpainted metal surface on the HV-3Rs chassis.
Unplug the HV-3R’s AC power cord before inserting or removing the AD-R96 board
Clocks – the AD-R96 should have only one clock source. If running with
the internal clock, make sure SW4 is in the INT position and no external clock
is connected.
Sync Signals on the BNC connectors should conform to the AES-3id
specification. AES-3, through an XLR-to-BNC transformer (Neutrik NADITBNC-F or
equivalent) will work fine. S/PDIF works, but is not specified.
CUSTOMER SUPPORT
Millennia Media, SPC
http://www.mil-media.com
C 6411 Capitol Avenue
Diamond Springs, CA 95619 530-647-0750