TOPBAND WPB02 Wireless Charging Power Bank Instructions
- June 5, 2024
- TOPBAND
Table of Contents
TOPBAND WPB02 Wireless Charging Power Bank Instructions
Overview
LED Indicator
White| Power Bank Charging Level
White Flashing| Power Bank Charging
Blue For 5 seconds| Wireless Charging Ready
Blue Flashing| Not Wirelessly Charging (may not be placed correctly or check
for interference)
NOTE: LED indicators will turn off after 5 seconds even when the device
is charging
Charging Instructions
Charging the Power Bank
Using the USB-C cable, connect the Power Bank to a power source of 5V-
9V/2A.The four white LEDs will turn on displaying the current battery level.
Each white LED equals to 25% of battery. The LEDs will turn off after 20
seconds after being plugged in. Press the button on the power bank while
charging to display the current power level.
(Note: LEDs will flash and turn off after 10 seconds.)
Wireless Charging:
WPB02 is compatible with iPhone 12 and 13 series. Click the button on the
bottom of the power bank to activate the wireless charging.
Then you can attach the WPB02. magnetically to the back of the iPhone. The
Blue LED will stay on for 4 seconds and will turnoff while it is charging
wirelessly. To turnoff the power bank， double press
the button.
Note: WPB02 will not attach securely on non-MagSafe cases
Wired Charging:
No Wireless? No Problem! Just connect USB-C cable to charge any
USB powered devices such as smartphones, Air pods, headsets, tablets, cameras
and more.
Instruction Notes
- Wireless charging will take priority over wired charging if connected at the same time.
- WPB02 supports pass through charging to devices. The device will have prority over the power bank when charging the power bank.
- WPB02 will turn off automatically after 3 minutes when idle.
- To turn off power bank, double press the power button
Specifications
| Capacity | 5000mAh 3.7V 18.5Wh | Dimension | 95x64x14mm |
|---|---|---|---|
| USB – C Input | DC 5V/2A, 9V/1.5A | Weight | 135±5g |
| USB – C Output | DC 5V/2A, 9V/1.5A, 12V/1.1A | **Operating | |
| temperature** | 0 °C to 40 °C | ||
| Wireless Output | 5W, 7.5W, 10W | Storage temperature | -20 °C to 60 |
°C
Charging distance| <4mm| Efficiency| 72%
Safety Information
- Check the compatibility by reading the product information before use.
- Do not place any metal objects, credit cards, magnets, RFID chips, etc.between your device and the wireless charger.
- Incorrect use of the product may cause a risk of fire, explosion other hazards, and may result In the warrannty being voided.
- This product is not a toy. It may contain small parts. Keep out of reach from children.
- Do not expose to high temperatures.
- Store the product in a cool and dry environment.
Do not disassemble the product. Improper modifications can damage the product
and cause serious injuries.
Do not use the product if it is damaged or if you suspect any strange odors.
Use only a soft, clean, dry cloth to clean the surface of the product.
- Wireless charing is convenient but itʼs not faster than wired charging.
- Do not use a power adaptor 5V / 1A or less.
Device might feel warm while charging.
- Battery life will decrease over time.
FCC Warning
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>