Shenzhen Topband WCM10 3-In-1 Magnetic Wireless Charging Stand User Manual

Topband
WCM10 3-In-1 Magnetic Wireless Charging Stand
**User Manual

**

Package Content

After opening the package, check all items in the list included in the package. If any item is missing, pls contact your dealer.

1. Magnetic wireless charging stand x1
2. Cable x1
3. User manual x1

Overview

Charging Instructions

Before using this product to charge your devices, pls connect the product with a power supply through a wall adapter and cable. The white LED will turn on once has a power supply, and then turn off after 2s if no device is charged to enter standby status.

1. Magnetic wireless charge
   Place the back of the mobile phone with magnetic attraction function close to the magnetic charging area, the magnetism will attract each other and the charging starts.

2. Wireless charge TWS earbuds case
   Place the wireless charging enabled TWS earbuds case on the base, charging start and the LED will illuminate in white continuously. Where the LED indicator flashes in white, it is FOD protection, pls check whether the devices are placed properly.

3. Wired charge through USB- A port
   Connect your device with the USB-A port, and charging starts.

Specifications

Safety Information

• Check the compatibility by reading the product information before use.
• Do not place any metal objects, credit cards, magnets, RFID chips, etc. between your device and the wireless charger.
• This product is not a toy. It may contain small parts. Keep out of reach from children.
• Do not expose to high temperatures.
• Store the product in a cool and dry environment. Do not disassemble the product. Improper modifications can damage the product and cause serious injuries.
• Do not use the product if it is damaged or if you suspect any strange odors.
• Use only a soft, dean, dry cloth to clean the surface of the product.
• Dot does not use a power adaptor 5V/1A or less.
• The device might feel warm while charging.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm from the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>